 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MICROCIRCUIT DATA SHEET MDLM119-X REV 0C1 HIGH SPEED DUAL COMPARATOR General Description The LM119 precision high speed dual comparator is fabricated on a single monolithic chip. It is designed to operate over a wide range of supply voltages down to a single 5V logic supply and ground. Furthermore, it has a higher gain and lower input current than other devices. The uncommitted collector of the output stage makes the LM119 compatible with RTL, DTL and TTL as well as capable of driving lamps and relays at currents up to 25 mA. Original Creation Date: 08/16/95 Last Update Date: 02/25/98 Last Major Revision Date: 08/16/95 Industry Part Number LM119 NS Part Numbers LM119E-SMD* LM119H-MLS LM119H-QMLV** LM119H-SMD*** LM119J-MLS LM119J-QMLV**** LM119J-SMD***** LM119W-MLS LM119W-QMLV****** LM119W-SMD******* LM119WG-SMD******** Prime Die LM119 Controlling Document See Features Page Processing MIL-STD-883, Method 5004 Subgrp Description 1 2 3 4 5 6 7 8A 8B 9 10 11 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 Quality Conformance Inspection MIL-STD-883, Method 5005 1 MDLM119-X REV 0C1 MICROCIRCUIT DATA SHEET Features Two independent comparators. Operates from a single 5V supply. Typically 80nS response time at +15V. Minimum fan-out of 2 each side. Maximum input current of 1uA over temperature. Inputs and outputs can be isolated from system ground. High common mode slew rate. SMD : 86014012A*, 5962-9679801VIA**, 8601401IA***, 5962-9679801VCA****, 8601401CA*****, 5962-9679801VHA******, 8601401HA*******, 8601401XA******** Although designed primarily for applications requiring operation from digital logic supplies, the LM119 is fully specified for power supplies up to +15V. It features faster response than the LM111 at the expense of higher power dissipation. However, the high speed, wide operating voltage range and low package count make the LM119 much more versatile than older devices. - 2 MDLM119-X REV 0C1 MICROCIRCUIT DATA SHEET (Absolute Maximum Ratings) (Note 1) Total Supply Voltage 36V Output to Negative Supply Voltage 36V Ground to Negative Supply Voltage 25V Ground to Positive Supply Voltage 18V Differential Input Voltage +5V Input Voltage (Note 3) +15V ESD Tolerance (Note 4) 800V Power Dissipation (Note 2) 500mW Output Short Circuit Duration 10 seconds Maximum Junction Temperature 150 C Storage Temperature Range -65 C to 150 C Lead Temperature (Soldering, 10 seconds) Thermal Resistance ThetaJA E Package (Still Air) E Package (500LF/Min Air flow) H Package (Still Air) H Package (500LF/Min Air flow) J Package (Still Air) J Package (500LF/Min Air flow) W Package (Still Air) W Package (500LF/Min Air flow) WG Package (Still Air) WG Package (500LF/Min Air flow) ThetaJC E Package H Package J Package W Package WG Package Note 1: 260 C 89 63 162 88 94 52 215 132 215 132 5 31 11 13 13 C/W C/W C/W C/W C/W C/W C/W C/W C/W C/W C/W C/W C/W C/W C/W Note 2: Note 3: Note 4: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions. The maximum power dissipation must be derated at elevated temperatures and is dictated by Tjmax (maximum junction temperature), ThetaJA (package junction to ambient thermal resistance), and TA (ambient temperature). The maximum allowable power dissipation at any temperature is Pdmax = (Tjmax - TA)/ThetaJA or the number given in the Absolute Maximum Ratings, whichever is lower. For supply voltages less than +15V the absolute maximum input voltage is equal to the supply voltage. Human body model, 1.5K Ohm in series with 100pF. 3 MDLM119-X REV 0C1 MICROCIRCUIT DATA SHEET Recommended Operating Conditions Operating Temperature Range -55 C < TA < 125 C 4 MDLM119-X REV 0C1 MICROCIRCUIT DATA SHEET Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vcm = 0V SYMBOL Icc+ PARAMETER Positive Supply Current Negative Supply Current +Vcc = +15V +Vcc = +15V Icc+Vcc = +15V +Vcc = +15V +Vcc = +15V Ileak Output Leakage Current Input Bias Current +Vcc = 15V, -Vcc = -1V, Vgnd = 0V, Vout = 35V +Vcc = +15V +Vcc = +15V Vcc = 5V 2 2 Vio Input Offset Voltage Vcc = 5V, Vcm = 1V, Rs < 5K Vcc = 5V, Vcm = 1V, Rs < 5K Vcc = 5V, Vcm = 3V, Rs < 5K Vcc = 5V, Vcm = 3V, Rs < 5K +Vcc = +15V, Vcm = 12V, Rs < 5K +Vcc = +15V, Vcm = 12V, Rs < 5K +Vcc = +15V, Vcm = -12V, Rs < 5K +Vcc = +15V, Vcm = -12V, Rs < 5K Iio Input Offset Current Vcc = 5V, Vcm = 1V 2 2 Vcc = 5V, Vcm = 3V 2 2 +Vcc = +15V, Vcm = 12V +Vcc = +15V, Vcm = 12V +Vcc = +15V, Vcm = -12V +Vcc = +15V, Vcm = -12V Vi Input Voltage Range Vcc = 5V Vcc = +15V 2, 3 3 2 2 2 2 -3.8 -6.8 -3.8 -6.8 -3.8 -6.8 -3.8 -6.8 -75 -100 -75 -100 -75 -100 -75 -100 1 -12 1 1 Iib -4.2 -4.5 -6 1.8 10 0.475 0.95 0.475 .95 3.8 6.8 3.8 6.8 3.8 6.8 3.8 6.8 75 100 75 100 75 100 75 100 3 12 CONDITIONS NOTES PINNAME MIN MAX 11 11.5 UNIT mA mA mA mA mA uA uA uA uA uA uA mV mV mV mV mV mV mV mV nA nA nA nA nA nA nA nA V V SUBGROUPS 1 2, 3 1 2 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1, 2, 3 1, 2, 3 5 MDLM119-X REV 0C1 MICROCIRCUIT DATA SHEET Electrical Characteristics DC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vcm = 0V SYMBOL Vsat PARAMETER Output Saturation Voltage CONDITIONS Vcc = 15V, Iout = 25mA, Vin < -5mV +Vcc = 3.5V, -Vcc = -1V, Vin < -6mV, Isink < 3.2mA +Vcc = 3.5V, -Vcc = -1V, Vin < -6mV, Isink < 3.2mA Av Voltage Gain +Vcc = +15V, Delta Vout = 12V +Vcc = +15V, Delta Vout = 12V Vcc = 5V, Delta Vout = 4.5V 4 4 2, 4 2, 4 2, 4 CMRR Common Mode Rejection Ratio +Vcc = +15V, Vcm = +12V 10.5 10 8 5 5.8 80 NOTES 1 PINNAME MIN MAX 1.5 0.4 0.6 UNIT V V V K K K K K dB SUBGROUPS 1, 2, 3 1, 2 3 4 5, 6 4 5 6 4 DC PARAMETERS: DRIFT VALUES (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vcm = 0V. Delta calculations performed on JAN S and QMLV devices at group B, subgroup 5 ONLY. Icc+ IccVio Positive Supply Current Negative Supply Current Input Offset Voltage Note 1: Note 2: Note 3: Note 4: +Vcc = +15V +Vcc = +15V Vcc = 5V, Vcm = 1V, Rs < 5K -1 -0.5 -0.4 1 0.5 0.4 mA mA mV 1 1 1 Vin > 8mV at extremes for Ileak and Vin < -8mV at extremes for Vsat (Vin to exceed Vos). 5 Volt differential across +Vcc and -Vcc. Parameter guaranteed by Vio and Iio tests. K = V/mV. 6 MDLM119-X REV 0C1 MICROCIRCUIT DATA SHEET Graphics and Diagrams GRAPHICS# 6142HRA2 8906HRB2 9078HRB3 9641HRA2 E20ARE H10CRF J14ARH P000182A P000196A P000197A P000198A P000237A W10ARG WG10ARC DESCRIPTION LCC (E), TYPE C, 20 TERMINAL (B/I CKT) (blank) CERPACK (W), 10 LEAD (B/I CKT) (blank) LCC (E), TYPE C, 20 TERMINAL(P/P DWG) METAL CAN (H), TO-100, 10LD, .230 DIA PC (P/P DWG) CERDIP (J), 14 LEAD (P/P DWG) CERDIP (J), 14 LEAD (PINOUT) LCC (E), 20 LEAD (PINOUT) METAL CAN (H), 10 LEAD (PINOUT) CERPACK (W), 10 LEAD (PINOUT) CERAMIC SOIC (WG), 10 LEAD (PINOUT) CERPACK (W), 10 LEAD (P/P DWG) CERAMIC SOIC (WG), 10 LEAD (P/P DWG) See attached graphics following this page. 7 N/C N/C GND 1 IN+ 1 IN- 1 VOUTPUT 2 1 2 3 4 5 6 7 14 13 12 11 10 9 8 N/C N/C OUTPUT 1 V+ IN- 2 IN+ 2 GND 2 LM119J 14 - LEAD DIP CONNECTION DIAGRAM TOP VIEW P000182A N MIL/AEROSPACE OPERATIONS 2900 SEMICONDUCTOR DRIVE SANTA CLARA, CA 95050 N N N N MDLM119-X REV 0C1 MICROCIRCUIT DATA SHEET Revision History Rev 0B0 ECN # Rel Date Originator Barbara Lopez Changes Added Power Dissipation - Note 2 in Absolute section. Renumbered all other notes. Archive MDS - MDLM119-X Rev. 0A0. Release MDS - MDLM119-X Rev. 0B0. Update MDS: MDLM119-X Rev. 0B0 to MDLM119-X Rev. 0C1. Added WG package to MDS. Added MKT outline, Burn-In CKT and Pinouts. M0001371 02/25/98 0C1 M0002726 02/25/98 Barbara Lopez 8 |
Price & Availability of NSC05316
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |