 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MICROCIRCUIT DATA SHEET MJLM140-15-H REV 0B0 Original Creation Date: 05/10/95 Last Update Date: 02/17/97 Last Major Revision Date: 05/10/95 VOLTAGE REGULATOR, +15 VOLTS AT 0.5A General Description The LM140 monolithic 3-terminal positive voltage regulators employ internal current limiting, thermal shutdown and safe-area compensation, making them essentially indestructible. If adequate heat sinking is provided, they can deliver over 0.5A output current. They are intended as fixed voltage regulators in a wide range of applications including local (on-card) regulation for elimination of noise and distribution problems associated with single-point regulation. In addition to use as fixed voltage regulators, these devices can be used with external components to obtain adjustable output voltages and currents. Considerable effort was expended to make the entire series of regulators easy to use and minimize the number of external components. It is not necessary to bypass the output, although this does improve transient response. Input bypassing is needed only if the regulator is located far from the filter capacitor of the power supply. Industry Part Number LM140 NS Part Numbers JL140-15BXA Prime Die LM141 Controlling Document 38510/10704(CIRCUIT A) REV C Processing MIL-STD-883, Method 5004 Subgrp Description 1 2 3 4 5 6 7 8A 8B 9 10 11 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 Quality Conformance Inspection MIL-STD-883, Method 5005 1 MJLM140-15-H REV 0B0 MICROCIRCUIT DATA SHEET Features Output current in excess of 0.5A No external components Internal thermal overload protection Internal short circuit current-limiting Output transistor safe-area compensation 2 MJLM140-15-H REV 0B0 MICROCIRCUIT DATA SHEET (Absolute Maximum Ratings) (Note 1) DC Input Voltage 35V Internal Power Dissipation (Note 2) Internally Limited Maximum Junction Temperature 150 C Storage Temperature Range -65 C to +150 C Lead Temperature Soldering, (10 seconds) Thermal Resistance ThetaJA (Still Air) (500 LF/Min Air Flow) ThetaJC ESD Susceptibility (Note 3) 300 C 232 C/W 77 C/W 15 C/W 2KV Note 1: Absolute Maximum Ratings are limits beyond which damage to the device may occur. Operating Conditions are conditions under which the device functions but the specification might not be guaranteed. For guaranteed specifications and test conditions see the Electrical Characteristics. The Maximum allowable power dissipation at any ambient temperature is a function of the maximum junction temperature for operation (TjMAX = 150 C), the junction-to-ambient thermal resistance (ThetaJA), and the ambient temperature (TA). PDMAX = (TjMAX - TA)/ThetaJA. If this dissipation is exceeded, the die temperature will rise above TjMAX and the electrical specifications do not apply. If the die temperature rises above 150 C, the device will go into thermal shutdown. Human body model, 100pF discharged through 1.5K Ohms Note 2: Note 3: Recommended Operating Conditions (Note 1) Temperature Range (TA) (Note 2) -55 C to +125 C Note 1: Absolute Maximum Ratings are limits beyond which damage to the device may occur. Operating Conditions are conditions under which the device functions but the specification might not be guaranteed. For guaranteed specifications and test conditions see the Electrical Characteristics. The Maximum allowable power dissipation at any ambient temperature is a function of the maximum junction temperature for operation (TjMAX = 150 C), the junction-to-ambient thermal resistance (ThetaJA), and the ambient temperature (TA). PDMAX = (TjMAX - TA)/ThetaJA. If this dissipation is exceeded, the die temperature will rise above TjMAX and the electrical specifications do not apply. If the die temperature rises above 150 C, the device will go into thermal shutdown. Note 2: 3 MJLM140-15-H REV 0B0 MICROCIRCUIT DATA SHEET Electrical Characteristics DC PARAMETERS SYMBOL Vout (1) PARAMETER Output Voltage CONDITIONS Vin = 18.5V, Il = -5mA Vin = 18.5V, Il = -500mA Vin = 30V, Il = -5mA Vin = 30V, Il = -500mA Vin = 35V, Il = -5mA Vin = 35V, Il = -50mA VRLINE VRLOAD Line Regulation Load Regulation 18.5V < Vin < 35V, Il = -350mA -500mA < Il < -5mA, Vin = 20V -50mA < Il < -5mA, Vin = 35V ISCD Stand by Current Drain Vin = 20V, Il = -5mA Vin = 35V, Il = -5mA Delta ISCD (LINE) Delta ISCD (LOAD) Iol Ios Stand by Current Drain vs. Line Voltage Stand by Current Drain vs. Load Current Overload Current Output Short Circuit Current 18.5V < Vin < 35V, Il = -5mA NOTES PINNAME MIN 14.25 14.25 14.25 14.25 14.25 14.25 -150 -300 -450 -7 -8 -1 MAX 15.75 15.75 15.75 15.75 15.75 15.75 150 300 450 -0.5 -0.5 1 UNIT V V V V V V mV mV mV mA mA mA SUBGROUPS 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 2 7, 8A, 8B -500mA < Il < -5mA, Vin = 20V -0.5 0.5 mA FORCED Delta/Vout = -1.43V, Vin = 18.5V Vin = 20V Vin = 35V -2 -1.75 -1 1 2 3 3 14.1 14.25 -3.75 -3.75 -0.5 -0.01 -0.01 15.9 15.75 3.75 3.75 A A A V V Vout (2) Vout (3) Delta Vout/ Delta T Output Voltage Output Voltage Average Temperature Coefficient Output Voltage Vin = 20V, Il = -5mA Vin = 20V, Il = -5mA 25 C < TA < +125 C, Vin = 20V, Il = -5mA -55 C < TA < 25 C, Vin = 20V, Il = -5mA mV/C 8A mV/C 8B 4 MJLM140-15-H REV 0B0 MICROCIRCUIT DATA SHEET Electrical Characteristics AC PARAMETERS SYMBOL NO Delta Vout/ Delta Il Delta Vout/Delta Vin Delta Vin/Delta Vout PARAMETER Output Noise Voltage Transient Load Response Transient Line Response Ripple Rejection CONDITIONS Vin = 20V, Il = -50mA Delta Il = -200mA, Vin = 20V, Il = -50mA Vin = 20V, VPulse = 3V, Il = -5mA NOTES PINNAME MIN MAX 300 2.5 UNIT SUBGROUPS uVrms 7 mV/mA 7 30 mV/V 7 Vin = 20V, Il = -125mA, ei = 1Vrms at f = 2400Hz 53 dB 4 DC PARAMETERS: DRIFT VALUES (The following conditions apply to all the following parameters, unless otherwise specified.) DC: "Delta calculation performed on JAN S and QMLV devices at group B, subgroup 5 only". Vout Output Voltage Vin = 18.5V, Il = -5mA Vin = 18.5V, Il = -500mA Vin = 30V, Il = -5mA Vin = 30V, Il = -500mA Vin = 35V, Il = -5mA Vin = 35V, Il = -50mA ISCD Stand by Current Drain Note 1: Note 2: Note 3: Vin = 20V, Il = -5mA -0.075 0.075 -0.075 0.075 -0.075 0.075 -0.075 0.075 -0.075 0.075 -0.075 0.075 -20 20 V V V V V V % 1 1 1 1 1 1 1 Tested at TA = 125 C, correlated to TA = +150 C. Tested at extremes as a set up for Delta Vout/Delta T. Calculated parameter. For calculations use Vout test at Vin = 17V, Il = -5mA (See NOTE 2). 5 MJLM140-15-H REV 0B0 MICROCIRCUIT DATA SHEET Graphics and Diagrams GRAPHICS# H03ARC (blank) DESCRIPTION See attached graphics following this page. 6 |
Price & Availability of NSC05354
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |