 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MICROCIRCUIT DATA SHEET MNLM119-X REV 0D0 HIGH SPEED DUAL COMPARATOR General Description The LM119 precision high speed dual comparator is fabricated on a single monolithic chip. It is designed to operate over a wide range of supply voltages down to a single 5V logic supply and ground. Furthermore it has a higher gain and lower input current than other devices. The uncommitted collector of the output stage makes the LM119 compatible with RTL, DTL and TTL as well as capable of driving lamps and relays at currents up to 25mA. Original Creation Date: 08/29/95 Last Update Date: 05/06/97 Last Major Revision Date: 08/29/95 Industry Part Number LM119 NS Part Numbers LM119E/883 LM119H/883 LM119J/883 LM119W/883 Prime Die LM119 Processing MIL-STD-883, Method 5004 Subgrp Description 1 2 3 4 5 6 7 8A 8B 9 10 11 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 Quality Conformance Inspection MIL-STD-883, Method 5005 1 MNLM119-X REV 0D0 MICROCIRCUIT DATA SHEET Features Two independent comparators Operates from a single 5V supply Typically 80nS response time at +15V Minimum fan-out of 2 each side Maximum input current of 1uA over temperature Inputs and outputs can be isolated from system ground High common mode slew rate Although designed primarily for applications requiring operation from digital logic supplies, the LM119 is fully specified for power supplies up to +15V. It features faster response than the LM111 at the expense of higher power dissipation. However, the high speed, wide operating voltage range and low package count make the LM119 much more versatile than older devices. 2 MNLM119-X REV 0D0 MICROCIRCUIT DATA SHEET (Absolute Maximum Ratings) (Note 1) Total Supply Voltage 36V Output to Negative Supply Voltage 36V Ground to Negative Supply Voltage 25V Ground to Positive Supply Voltage 18V Differential Input Voltage +5V Input Voltage (Note 3) +15V ESD Tolerance (Note 4) 800V Power Dissipation (Note 2) 500mW Output Short Circuit Duration 10 Sec. Maximum Junction Temperature 150 C Storage Temperature Range -65 C to 150 C Lead Temperature Soldering, (10 seconds) Thermal Resistance ThetaJA E Package (Still Air) E Package (500LF/Min Air H Package (Still Air) H Package (500LF/Min Air J Package (Still Air) J Package (500LF/Min Air W Package (Still Air) W Package (500LF/Min Air ThetaJC E Package H Package J Package W Package Note 1: 260 C flow) flow) flow) flow) 89 63 162 88 94 52 215 132 C/W C/W C/W C/W C/W C/W C/W C/W 5 C/W 31 C/W 10.9 C/W 12.3 C/W Note 2: Note 3: Note 4: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions. The maximum power dissipation must be derated at elevated temperatures and is dictated by Tjmax (maximum junction temperature), ThetaJA (package junction to ambient thermal resistance), and TA (ambient temperature). The maximum allowable power dissipation at any temperature is Pdmax = (Tjmax - TA)/ThetaJA or the number given in the Absolute Maximum Ratings, whichever is lower. For supply voltages less than +15V the absolute maximum input voltage is equal to the supply voltage. Human body model, 1.5K Ohm in series with 100pF. 3 MNLM119-X REV 0D0 MICROCIRCUIT DATA SHEET Recommended Operating Conditions Operating Temperature Range -55 C < TA < 125 C 4 MNLM119-X REV 0D0 MICROCIRCUIT DATA SHEET Electrical Characteristics DC PARAMETERS: (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vcm = 0V. SYMBOL Icc+ PARAMETER Positive Supply Current CONDITIONS +Vcc = +15V, V+ = 5.6V thru 1.4K Ohms, Vout = LOW +Vcc = +15V, V+ = 5.6V thru 1.4K Ohms, Vout = LOW IccNegative Supply Current +Vcc = +15V, V+ = 5.6V thru 1.4K Ohms, Vout = LOW +Vcc = +15V, V+ = 5.6V thru 1.4K Ohms, Vout = LOW Ileak Output Leakage Current +Vcc = 15V, -Vcc = -1V Vgrd = 0V, Vout = 35V, Vin = 5mV -4.2 -4.5 1.8 9.5 10 Iib Input Bias Current +Vcc = +15V +Vcc = +15V V+ = 5V, V- = 0V, Vcm = 1.5V 0.475 0.95 0.475 0.95 Vio Input Offset Voltage V+ = 5V, V- = 0V, Vcm = 1V, Rs = 5K Ohms V+ = 5V, V- = 0V, Vcm = 3V, Rs = 5K Ohms +Vcc = +15V, Vcm = 12V, Rs = 5K Ohms +Vcc = +15V, Vcm = 12V, Rs = 5K Ohms +Vcc = +15V, Vcm = -12V, Rs = 5K Ohms +Vcc = +15V, Vcm = -12V, Rs = 5K Ohms Iio Input Offset Current V+ = 5V, V- = 0V, Vcm = 1V -3.8 -6.8 -3.8 -6.8 -3.8 -6.8 -3.8 -6.8 -75 -100 V+ = 5V, V- = 0V, Vcm = 3V -75 -100 +Vcc = +15V, Vcm = 12V +Vcc = +15V, Vcm = 12V +Vcc = +15V, Vcm = -12V +Vcc = +15V, Vcm = -12V -75 -100 -75 -100 3.8 6.8 3.8 6.8 3.8 6.8 3.8 6.8 75 100 75 100 75 100 75 100 NOTES PINNAME MIN MAX 11 11.5 UNIT mA mA mA mA uA uA uA uA uA uA uA mV mV mV mV mV mV mV mV nA nA nA nA nA nA nA nA SUBGROUPS 1 2 1 2 1 2 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 5 MNLM119-X REV 0D0 MICROCIRCUIT DATA SHEET Electrical Characteristics DC PARAMETERS:(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vcm = 0V. SYMBOL Vsat PARAMETER Output Saturation Voltage CONDITIONS V+ = 5V, V- =0V, Il = 4mA NOTES 3 3 Vcc = +15V, Il = 25mA, Vin = -5mV Avs Voltage Gain +Vcc = +15V, Delta Vout = 12V, Rl = 1.4K Ohms +Vcc = +15V, Delta Vout = 12V, Rl = 1.4K Ohms V+ = 5V, V- = 0V, Delta Vout + 4.5V, Rl = 1.4K Ohms 1, 4 1, 4 2, 4 2, 4 2, 4 10.5 10 8 5 5.8 PINNAME MIN MAX 0.4 0.6 1.5 UNIT V V V SUBGROUPS 1, 2 3 1 V/mV 4 V/mV 5, 6 V/mV 4 V/mV 5 V/mV 6 DC PARAMETERS: DRIFT VALUES (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vcm = 0V. "Deltas not required on B-Level product. Deltas required for S-Level product ONLY as specified on Internal Processing Instructions (IPI)." Icc+ IccVio Positive Supply Current Negative Supply Current Input Offset Voltage Note Note Note Note 1: 2: 3: 4: +Vcc = +15V, V+ = 5.6V thru 1.4K Ohms, Vout = LOW +Vcc = +15V, V+ = 5.6V thru 1.4K Ohms, Vout = LOW V+ = 5V, V - = 0V, Vcm = 1V, Rs = 5K Ohms -1 -0.5 -0.4 1 0.5 0.4 mA mA mV 1 1 1 Gain is computed with an output swing from +13.5V to +1.5V. Gain is computed with an output swing from +5.0V to +0.5V. Output is monitored by measuring Vin with limits from 0 to 6mV at all temps. Datalog reading in K = V/mV. 6 MNLM119-X REV 0D0 MICROCIRCUIT DATA SHEET Graphics and Diagrams GRAPHICS# E20ARE H10CRE J14ARH W10ARE DESCRIPTION LDLESS CHIP CARRIER, TYPE C 20 TERMINAL(P/P DWG) (blank) CERDIP (J), 14 LEAD (P/P DWG) (blank) See attached graphics following this page. 7 MNLM119-X REV 0D0 MICROCIRCUIT DATA SHEET Revision History Rev 0D0 ECN # Rel Date Originator Barbara Lopez Changes Added Power Dissipation - Note 2 in Absolute section. Renumbered all other notes. Archive MDS - MNLM119-X Rev. 0C0. Release MDS - MNLM119-X Rev. 0D0. M0001370 05/06/97 8 |
Price & Availability of NSC05394
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |