 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MICROCIRCUIT DATA SHEET MNLM611AM-X REV 0BL Original Creation Date: 08/02/95 Last Update Date: 11/12/98 Last Major Revision Date: 08/02/95 OPERATIONAL AMPLIFIER AND ADJUSTABLE REFERENCE Industry Part Number LM611 NS Part Numbers LM611AMJ/883 Prime Die LM611 Processing MIL-STD-883, Method 5004 Subgrp Description 1 2 3 4 5 6 7 8A 8B 9 10 11 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 Quality Conformance Inspection MIL-STD-883, Method 5005 1 MNLM611AM-X REV 0BL MICROCIRCUIT DATA SHEET Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: V-=Gnd=0V, V+=5V, Vcm=Vout=V+/2, Ir = 100uA Feedback Pin Shorted to Gnd SYMBOL Icc PARAMETER Total Supply Current Supply Voltage Range CONDITIONS Rload = Infinity, 4V <= V+ <= 36V NOTES PINNAME MIN MAX 300 320 Vs 2.8 3.0 36 36 UNIT uA uA V V SUBGROUPS 1 2, 3 1 2, 3 DC PARAMETERS: Operational Amplifier (The following conditions apply to all the following parameters, unless otherwise specified.) DC: V-=Gnd=0V, V+=5V, Vcm=Vout=V+/2, Ir = 100uA Feedback Pin Shorted to Gnd Vio1 Offset Voltage Over V+ Range Offset Voltage Over Vcm Range Input bias Current Input Offset Current Common-Mode Rejection Ratio Power Supply Rejection Ratio Output Source Current Output Sink Current Short Circuit Current V+=30V, 0V <= Vcm <= 1.4V(Room) and <= Vcm <=1.8V(Over Temp) CMRR = 20log(Delta Vcm/Delta Vio) 4V <= V+ <= 30V, Vcm = V+/2 PSRR=20log (Delta V+/Delta Vio) Vout=V+ -2.5V, V+in = 0V, V-in = -0.3V 4V <= V+ <= 36V -3.5 -6.0 Vio2 Vcm=0V through Vcm=(V+ -1.4V) Room, (V+ -1.8V) Hot and Cold. -3.5 -6.0 Iib -25 -30 Iio -4 -5 CMRR 80 75 80 75 Iout -20 -13 Isink Vout=1.6V, V+in = 0V, V-in = 0.3V 14 8 Ishort Vout=0V, V+in = 3V, V-in = 2V, Source 50 60 Vout=5V, V+in = 2V, V-in = 3V, Sink 60 80 3.5 6.0 3.5 6.0 25 30 4 5 mV mV mV mV nA nA nA nA dB dB dB dB mA mA mA mA mA mA mA mA 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 PSRR 2 MNLM611AM-X REV 0BL MICROCIRCUIT DATA SHEET Electrical Characteristics DC PARAMETERS: Voltage Reference (The following conditions apply to all the following parameters, unless otherwise specified.) DC: V-=Gnd=0V, V+=5V, Vcm=Vout=V+/2, Ir = 100uA Feedback Pin Shorted to Gnd SYMBOL Vr Delta Vr/Delta Ir PARAMETER Voltage Reference Vr Change with Current Vr(100uA) - Vr(17uA) CONDITIONS NOTES 1 PINNAME MIN MAX UNIT SUBGROUPS 1 1 2, 3 1 2, 3 1.2365 1.2515 V -1 -1.1 1 1.1 5 5.5 0.51 0.56 12 13 7 10 mV mV mV mV Vr(10mA) - Vr(100uA) 2 2 -5 -5.5 R Resistance Delta Vr(10mA to 100uA)/9.9mA 3 3 Ohms 1 Ohms 2, 3 Ohms 1 Ohms 2, 3 mV mV mV mV mV mV mV mV nA nA 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 Delta Vr(100uA to 17uA)/83uA 3 3 Delta Vr/Delta Vro Delta Vr/Delta V+ Vr Change with High Vro Vr Change with V+ Change Vr(Vro=Vr)-Vr(Vro=6.3V) (5.06V between Anode and FEEDBACK) Vr(V+=5V)-Vr(V+=36V) -1.2 -1.3 Vr(V+=5V)-Vr(V+=3V) -1 -1.5 1.2 1.3 1 1.5 1.5 3.0 35 40 Delta Vr/DeltaVa node Ib(If) Vr Change with Vanode Change FEEDBACK Bias Current V+= V+max, Delta Vr=Vr(at Vanode=V-=Gnd) -Vr(at Vanode=V+ -1.0V) Ifb; Vanode <= Vfb <= 5.06V DC PARAMETERS: Operational Amplifiers (The following conditions apply to all the following parameters, unless otherwise specified.) DC: V-=Gnd=0V, V+=5V, Vcm=Vout=V+/2, Ir = 100uA Feedback Pin Shorted to Gnd Av Open Loop Voltage Gain Output Voltage Swing High Output Voltage Swing Low Rl=10KOhms, V+=30V, 5V <= Vout <= 25V 100 40 Vo1 Rl = 10K Ohms, V+ = 36V V+-1.7 v+-1.9 Vo2 Rl = 10K Ohms to V+, V+ = 36V V/mV 4 V/mV 5, 6 V V V-+0.9 V V-+1.0 V 4 5, 6 4 5, 6 3 MNLM611AM-X REV 0BL MICROCIRCUIT DATA SHEET Electrical Characteristics AC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) AC: V-=Gnd=0V, V+=5V, Vcm=Vout=V+/2, Ir = 100uA Feedback Pin Shorted to Gnd SYMBOL Sr PARAMETER Slew Rate V+ = 30V CONDITIONS NOTES 4 4 Note 1: Note 2: Note 3: Note 4: PINNAME MIN 0.55 0.45 MAX UNIT SUBGROUPS V/uS 7 V/uS 8A, 8B Vro is the reference output voltage, which may be set for 1.2V to 6.3V. Vr is the Vro-to Feedback voltage (nominally 1.244V). Low contact resistance is required for accurate measurement. Guaranteed by Vr change with current. Slew rat is measured with the op amp in a voltage follower configuration. For rising slew rate, the input voltage is driven from 5V to 25V, and the output voltage transition is sampled at 10V and 20V. For falling slew rate, the input voltage is driven from 25V to 5V, and the output voltage transition is sampled at 20V and 10V. 4 MNLM611AM-X REV 0BL MICROCIRCUIT DATA SHEET Revision History Rev 0BL ECN # Rel Date Originator Barbara Lopez Changes Changed: MNLM611AM-X Rev. 0AL to MNLM611AM-X Rev. 0BL. M0001697 11/12/98 5 |
Price & Availability of NSC05525
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |