View ON0700_995368.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MOTOROLA
Order Number: MC10EP11/D Rev. 0.1, 05/1999
Semiconductor Components
MC10EP11
SO-8, D SUFFIX 8-LEAD PLASTIC SOIC PACKAGE CASE 751
ORDERING INFORMATION MC10EP11D SOIC
Product Preview
1:2 Differential Fanout Buffer
* * * * * * * * * * *
PIN
PIN DESCRIPTION
FUNCTION ECL Data Inputs ECL Data Outputs
180ps Typical Propagation Delay Maximum Frequency > 2.7GHz PECL mode: 3.0V to 5.5V VCC with VEE = 0V ECL mode: 0V VCC with VEE = -3.0V to -5.5V Internal Input Resistors: Pulldown on D, Pulldown and Pullup on D Q Outputs will default LOW with inputs open or at VEE ESD Protection: >4KV HBM, >200V MM New Differential Input Common Mode Range Moisture Sensitivity Level 1, Indefinite Time Out of Drypack Flammability Rating: UL-94 code V-0 @ 1/8", Oxygen Index 28 to 34 Transistor Count = 73 devices
D, D Q0, Q0, Q1, Q1
The MC10EP11 is a differential 1:2 fanout buffer. The device is pin and functionally equivalent to the LVEL11 device. With AC performance much faster than the LVEL11 device, the EP11 is ideal for applications requiring the fastest AC performance available.
This document contains information on a product under development. Motorola reserves the right to change or discontinue this product without notice.
(c) Motorola, Inc. 1999
1
ECLinPS PlusTM
MC10EP11
Q0 1
8 VCC 7D
Q0 2
Q1 3
6D
Q1
4
5 VEE
Figure 1. 8-Lead Pinout (Top View) and Logic Diagram MAXIMUM RATINGS*
Symbol VEE VCC VI VI Iout TA Tstg JA JC Tsol Parameter Power Supply (VCC = 0V) Power Supply (VEE = 0V) Input Voltage (VCC = 0V, VI not more negative than VEE) Input Voltage (VEE = 0V, VI not more positive than VCC) Output Current Operating Temperature Range Storage Temperature Thermal Resistance (Junction-to-Ambient) Thermal Resistance (Junction-to-Case) Solder Temperature (<2 to 3 Seconds: 245C desired) Still Air 500lfpm Continuous Surge Value -6.0 to 0 6.0 to 0 -6.0 to 0 6.0 to 0 50 100 -40 to +85 -65 to +150 190 130 41 to 44 5% 265 Unit VDC VDC VDC VDC mA C C C/W C/W C
* Maximum Ratings are those values beyond which damage to the device may occur.
2
Home Page - http://scgtomorrow.motorola.com
MC10EP11 ECLinPS PlusTM
DC CHARACTERISTICS, ECL/LVECL (VCC = 0V; VEE = -5.5V to -3.0V) (Note 4.)
-40C Symbol IEE VOH VOL VIH VIL Characteristic Power Supply Current (Note 1.) Output HIGH Voltage (Note 2.) Output LOW Voltage (Note 2.) Input HIGH Voltage Single Ended Input LOW Voltage Single Ended Min 20 -1135 -1935 -1210 -1935 VEE+2.0 Typ 29 -1060 -1810 Max 37 -885 -1685 -885 -1610 0.0 150 D D 0.5 -150 0.5 -150 Min 20 -1070 -1870 -1145 -1870 VEE+2.0 25C Typ 30 -945 -1745 Max 39 -820 -1620 -820 -1545 0.0 150 0.5 -150 Min 22 -1010 -1810 -1085 -1810 VEE+2.0 85C Typ 31 -885 -1685 Max 40 -760 -1560 -760 -1485 0.0 150 Unit mA mV mV mV mV V A A
VIHCMR Input HIGH Voltage Common Mode Range (Note 3.) IIH IIL Input HIGH Current Input LOW Current
NOTE: 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse airflow greater than 500lfpm is maintained. 1. VCC = 0V, VEE = VEEmin to VEEmax, all other pins floating. 2. All loading with 50 ohms to VCC-2.0 volts. 3. VIHCMR min varies 1:1 with VEE, max varies 1:1 with VCC. 4. Input and output parameters vary 1:1 with VCC.
DC CHARACTERISTICS, LVPECL (VCC = 3.3V 0.3V, VEE = 0V) (Note 8.)
-40C Symbol IEE VOH VOL VIH VIL Characteristic Power Supply Current (Note 5.) Output HIGH Voltage (Note 6.) Output LOW Voltage (Note 6.) Input HIGH Voltage Single Ended Input LOW Voltage Single Ended Min 20 2165 1365 2090 1365 2.0 Typ 29 2240 1490 Max 37 2415 1615 2415 1690 3.3 150 D D 0.5 -150 0.5 -150 Min 20 2230 1430 2155 1430 2.0 25C Typ 30 2355 1555 Max 39 2480 1680 2480 1755 3.3 150 0.5 -150 Min 22 2290 1490 2215 1490 2.0 85C Typ 31 2415 1615 Max 40 2540 1740 2540 1815 3.3 150 Unit mA mV mV mV mV V A A
VIHCMR Input HIGH Voltage Common Mode Range (Note 7.) IIH IIL Input HIGH Current Input LOW Current
NOTE: 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse airflow greater than 500lfpm is maintained. 5. VCC = 3.3V, VEE = 0V, all other pins floating. 6. All loading with 50 ohms to VCC-2.0 volts. 7. VIHCMR min varies 1:1 with VEE, max varies 1:1 with VCC. 8. Input and output parameters vary 1:1 with VCC.
Home Page - http://scgtomorrow.motorola.com
3
ECLinPS PlusTM
MC10EP11
DC CHARACTERISTICS, PECL (VCC = 5.0V 0.5V, VEE = 0V) (Note 12.)
-40C Symbol IEE VOH VOL VIH VIL Characteristic Power Supply Current (Note 9.) Output HIGH Voltage (Note 10.) Output LOW Voltage (Note 10.) Input HIGH Voltage Single Ended Input LOW Voltage Single Ended Min 20 3865 3065 3790 3065 2.0 Typ 29 3940 3190 Max 37 4115 3315 4115 3390 5.0 150 D D 0.5 -150 0.5 -150 Min 20 3930 3130 3855 3130 2.0 25C Typ 30 4055 3255 Max 39 4180 3380 4180 3455 5.0 150 0.5 -150 Min 22 3990 3190 3915 3190 2.0 85C Typ 31 4115 3315 Max 40 4240 3440 4240 3515 5.0 150 Unit mA mV mV mV mV V A A
VIHCMR Input HIGH Voltage Common Mode Range (Note 11.) IIH IIL Input HIGH Current Input LOW Current
NOTE: 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse airflow greater than 500lfpm is maintained. 9. VCC = 5.0V, VEE = 0V, all other pins floating. 10. All loading with 50 ohms to VCC-2.0 volts. 11. VIHCMR min varies 1:1 with VEE, max varies 1:1 with VCC. 12. Input and output parameters vary 1:1 with VCC.
AC CHARACTERISTICS (VCC = 0V; VEE = -3.0V to -5.5V) or (VCC = 3.0V to 5.5V; VEE = 0V)
-40C Symbol fmax tPLH, tPHL tSKEW tJITTER VPP Characteristic Maximum Toggle Frequency (Note 13.) Propagation Delay CLK->Q, Q Device Skew Q, Q Part-to-Part (Note 14.) Cycle-to-Cycle Jitter Input Voltage Swing (Diff.) 150 Min 2.7 140 200 TBD TBD TBD 800 1200 150 270 Typ Max Min 2.7 160 220 TBD TBD TBD 800 1200 150 300 25C Typ Max Min 2.7 180 240 TBD TBD TBD 800 1200 320 85C Typ Max Unit GHz ps ps ps mV
tr Output Rise/Fall Times 50 110 180 60 120 200 70 140 220 ps tf (20% - 80%) Q, Q 13. Fmax guaranteed for functionality only. See Figure 2 for typical output swing. VOL and VOH levels are guaranteed at DC only. 14. Skew is measured between outputs under identical transitions.
4
Home Page - http://scgtomorrow.motorola.com
MC10EP11 ECLinPS PlusTM
1000
800 Output PP (mV)
600
400
200
0 0.5
1.0
1.5
2.0 Frequency (GHz)
2.5
3.0
3.5
Figure 2. Typical Output VPP vs. Frequency
Home Page - http://scgtomorrow.motorola.com
5
ECLinPS PlusTM
MC10EP11 OUTLINE DIMENSIONS
SO-8, D SUFFIX PLASTIC SOIC PACKAGE CASE 751-06 ISSUE T
A
8
D
5
C
E
1 4
H
0.25
M
B
M
h B C e A
SEATING PLANE
X 45 _
NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. DIMENSIONS ARE IN MILLIMETER. 3. DIMENSION D AND E DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 5. DIMENSION B DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE B DIMENSION AT MAXIMUM MATERIAL CONDITION. DIM A A1 B C D E e H h L MILLIMETERS MIN MAX 1.35 1.75 0.10 0.25 0.35 0.49 0.19 0.25 4.80 5.00 3.80 4.00 1.27 BSC 5.80 6.20 0.25 0.50 0.40 1.25 0_ 7_
q
L 0.10 A1 B 0.25
M
CB
S
A
S
q
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 1-303-675-2140 or 1-800-441-2447 Customer Focus Center: 1-800-521-6274 MfaxTM: RMFAX0@email.sps.mot.com - TOUCHTONE 1-602-244-6609 ASIA / PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Centre, Motorola Fax Back System - US & Canada ONLY 1-800-774-1848 2, Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong. - http://sps.motorola.com/mfax/ 852-26629298 HOME PAGE: http://motorola.com/sps/ JAPAN: Motorola Japan Ltd.; SPD, Strategic Planning Office, 141, 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan. 81-3-5487-8488
6
Home Page - http://scgtomorrow.motorola.com
MC10EP11/D

▲Up To Search▲

Price & Availability of ON0700

	To Download ON0700 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .