 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by MHPM6B15E60D3/D Advance Information Hybrid Power Module Integrated Power Stage for 230 VAC Motor Drives These VersaPowerTM modules integrate a 3-phase inverter and 3-phase rectifier in a single convenient package. They are designed for 0.5, 1.0, and 1.5 hp motor drive applications at frequencies up to 15 kHz. The inverter incorporates advanced E-Series insulated gate bipolar transistors (IGBT) matched with ultrafast soft (UFS) free-wheeling diodes to give optimum performance. The input bridge uses rugged, efficient diodes with high surge capability. The top connector pins are designed for easy interfacing to the user's control board. * Short Circuit Rated 10 s @ 125C, 400 V * Pin-to-Baseplate Isolation Exceeds 2500 Vac (rms) * Compact Package Outline * Access to Positive and Negative DC Bus * Gate-Emitter Clamp Diodes for ESD Protection Recognized * UL * Visit our website at http://www.mot-sps.com/tsg/ ORDERING INFORMATION Device XHPM6B7E60D3 XHPM6B10E60D3 XHPM6B15E60D3 Voltage Rating 600 600 600 Current Rating 7.0 10 15 Equivalent Horsepower 0.5 1.0 1.5 MHPM6B15E60D3 MHPM6B10E60D3 MHPM6B7E60D3 Motorola Preferred Devices 7.0, 10, 15 AMP, 600 VOLT HYBRID POWER MODULES CASE 464-03 ISSUE B MAXIMUM DEVICE RATINGS (TJ = 25C unless otherwise noted) Rating Repetitive Peak Input Rectifier Reverse Voltage (TJ = 25C to 150C) IGBT Reverse Voltage Gate-Emitter Voltage Continuous IGBT Collector Current (TC = 25C) 7E60 10E60 15E60 7E60 10E60 15E60 7E60 10E60 15E60 7E60 10E60 15E60 7E60 10E60 15E60 7E60 10E60 15E60 Symbol VRRM VCES VGES ICmax Value 900 600 20 7.0 10 15 7.0 10 13 14 20 30 7.0 10 15 5.2 6.8 10 14 20 30 Unit V V V A Continuous IGBT Collector Current (TC = 80C) IC80 A Repetitive Peak IGBT Collector Current (1) IC(pk) A Continuous Free-Wheeling Diode Current (TC = 25C) IFmax A Continuous Free-Wheeling Diode Current (TC = 80C) IF80 A Repetitive Peak Free-Wheeling Diode Current (1) IF(pk) A (1) 1.0 ms = 1.0% duty cycle This document contains information on a new product. Specifications and information herein are subject to change without notice. Preferred devices are Motorola recommended choices for future use and best overall value. VersaPower is a trademark of Motorola, Inc. Motorola IGBT Device (c) Motorola, Inc. 1998 Data 1 MHPM6B15E60D3 MHPM6B10E60D3 MHPM6B7E60D3 MAXIMUM DEVICE RATINGS (TJ = 25C unless otherwise noted) Rating Average Converter Output Current (Peak-to-Average ratio of 10, TC = 95C) Continuous Input Rectifier Current (TC = 25C) Non-Repetitive Peak Input Rectifier Forward Surge Current (2) (TJ = 95C prior to start of surge) IGBT Power Dissipation per die (TC = 95C) 7E60 10E60 15E60 7E60 10E60 15E60 Symbol IOmax IDC IFSM PD Value 20 20 475 14 17 23 7.4 9.0 13 13 - 40 to +150 10 2500 - 40 to +95 - 40 to +125 12 Unit A A A W Free-Wheeling Diode Power Dissipation per die (TC = 95C) PD W Input Rectifier Power Dissipation per die (TC = 95C) Junction Temperature Range Short Circuit Duration (VCE = 400 V, TJ = 125C) Isolation Voltage, pin to baseplate Operating Case Temperature Range Storage Temperature Range Mounting Torque -- Heat Sink Mounting Holes PD TJ tsc VISO TC Tstg -- W C ms Vac C C lb-in ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise noted) Characteristic DC AND SMALL SIGNAL CHARACTERISTICS Input Rectifier Forward Voltage (I = 15 A) TJ = 125C Instantaneous Reverse Current (V = 900 V) TJ = 150C Gate-Emitter Leakage Current (VCE = 0 V, VGE = 20 V) Collector-Emitter Leakage Current (VCE = 600 V, VGE = 0 V) Gate-Emitter Threshold Voltage (VCE = VGE, IC = 1.0 mA) Collector-Emitter Breakdown Voltage (IC = 10 mA, VGE = 0 V) Collector-Emitter Saturation Voltage (IC = ICmax, VGE = 15 V) TJ = 125C Free-Wheeling Diode Forward Voltage (IF = IFmax, VGE = 0 V) TJ = 125C Input Capacitance (VGE = 0 V, VCE = 10 V, f = 1.0 MHz) 7E60 10E60 15E60 VF IR IGES ICES VGE(th) V(BR)CES VCE(SAT) VF Cies -- -- -- -- -- -- 4.0 600 -- -- 1.7 -- -- -- -- 0.97 0.88 50 3000 -- 5.0 6.0 -- 2.0 1.8 2.0 1.8 780 1020 1605 1.2 -- -- -- 50 100 8.0 -- 2.4 -- 2.3 -- -- -- -- V Symbol Min Typ Max Unit mA mA mA V V V V pF THERMAL CHARACTERISTICS (EACH DIE) Thermal Resistance -- IGBT 7E60 10E60 15E60 7E60 10E60 15E60 RqJC -- -- -- -- -- -- -- 3.1 2.6 1.9 6.0 4.8 3.4 3.4 3.8 3.2 2.4 7.5 6.0 4.2 4.2 C/W Thermal Resistance -- Free-Wheeling Diode RqJC C/W Thermal Resistance -- Input Rectifier (2) 1.0 ms = 10% pulse width (tw 10%) RqJC C/W 2 Motorola IGBT Device Data MHPM6B15E60D3 MHPM6B10E60D3 MHPM6B7E60D3 U + C1 R1 NTC 1 2 3 4 5 6 7 8 V W MOTOR OUTPUT D7 D9 D11 D1 Q1 D3 Q3 D5 Q5 D8 D10 D12 D2 Q2 D4 Q4 D6 Q6 16 15 14 13 12 11 10 9 THREE PHASE INPUT SENSE RESISTOR Figure 1. Schematic of Module, Showing Pin-Out and External Connections Motorola IGBT Device Data 3 MHPM6B15E60D3 MHPM6B10E60D3 MHPM6B7E60D3 RECOMMENDED PCB LAYOUT VIEW OF BOARD FROM HEAT SINK (All Dimensions Typical) NON-PLATED THRU-HOLE 0.140 0.265 KEEP-OUT ZONES (x4) 0.270 0.175 0.250 0.625 0.270 PIN 1 PLATED THRU-HOLES (x16) 0.065 0.250 3.500 PACKAGE "SHADOW" 0.450 0.625 0.175 0.175 1.350 1.530 OPTIONAL NON-PLATED THRU-HOLES FOR ACCESS TO HEAT SINK MOUNTING SCREWS (x2) Figure 2. Package Footprint NOTE: 1. Package is symmetrical, except for a polarizing plastic post near pin 1, indicated by a non-plated thru-hole in the footprint. 2. Dimension of plated thru-holes indicates net size after plating. 3. Access holes for mounting screws may or may not be necessary depending on assembly plan for finished product. 4 Motorola IGBT Device Data MHPM6B15E60D3 MHPM6B10E60D3 MHPM6B7E60D3 PACKAGE DIMENSIONS A AA U Q 3 PL Y 2 PL 1 2 3 4 5 6 7 8 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. LEAD LOCATION DIMENSIONS (ie: G, S, R, H ...) ARE TO THE CENTER OF THE LEAD. MILLIMETERS MIN MAX 88.39 89.41 38.35 39.37 12.32 13.59 0.89 1.65 8.64 9.65 0.13 0.64 5.97 6.73 33.91 34.67 0.41 1.22 16.26 17.27 3.71 4.72 5.46 6.48 10.92 11.94 24.89 25.91 2.01 2.62 16.76 17.53 15.49 16.26 75.69 76.71 55.88 57.15 29.97 30.99 5.26 5.77 11.30 12.07 2.29 2.79 16.26 17.27 INCHES MIN MAX 3.480 3.520 1.510 1.550 0.485 0.535 0.035 0.065 0.340 0.380 0.005 0.025 0.235 0.265 1.335 1.365 0.016 0.048 0.640 0.680 0.146 0.186 0.215 0.255 0.430 0.470 0.980 1.020 0.079 0.103 0.660 0.690 0.610 0.640 2.980 3.020 2.200 2.250 1.180 1.220 0.207 0.227 0.445 0.475 0.090 0.110 0.640 0.680 J BPN R 16 15 14 13 12 11 10 9 H F DETAIL Z 16 PL S D 16 PL G 14 PL M 4 PL DETAIL Z AB CX K E L W V DIM A B C D E F G H J K L M N P Q R S U V W Y X AA AB CASE 464-03 ISSUE B Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 1-303-675-2140 or 1-800-441-2447 Customer Focus Center: 1-800-521-6274 MfaxTM: RMFAX0@email.sps.mot.com - TOUCHTONE 1-602-244-6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, Motorola Fax Back System - US & Canada ONLY 1-800-774-1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 - http://sps.motorola.com/mfax/ HOME PAGE: http://motorola.com/sps/ JAPAN: Nippon Motorola Ltd.: SPD, Strategic Planning Office, 141, 4-32-1 Nishi-Gotanda, Shagawa-ku, Tokyo, Japan. 03-5487-8488 Motorola IGBT Device Data MHPM6B15E60D3/D 5 |
Price & Availability of ON1943
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |