View ON2075_996731.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MM3Z2V4T1 SERIES Zener Voltage Regulator Diodes
200 mW SOD323 Surface Mount
This series of Zener diodes is packaged in a SOD323 surface mount package which has a power dissipation of 200 milliwatts. They are designed to provide voltage regulation protection and are especially attractive in situations where space is at a premium. They are well suited for applications such as cellular phones, hand held portables, and high density PC boards.
Special Features http://onsemi.com
1 Cathode
2 Anode
* Voltage Range is 2.4 to 75 Volts * Steady State Power Rating of 200 mW * Small Body Outline Dimensions: 0.067 X 0.049 * * * * * *
(1.7 mm X 1.25 mm) Low Body Height: 0.035 (0.9 mm) Void Free, Transfer-molded Plastic All External Surfaces are Corrosion Resistant Leads are Plated with Pb/Sn for Ease of Solderability Flammability Rating: UL94 V-0 Package Weight (per unit): 4.507 mg/unit
CASE 477-02, STYLE 1 SOD323
Mechanical Characteristics
ORDERING INFORMATION
Device MM3Zxxxxx Package SOD323 Shipping 3000 / Tape & Reel
Marking and Packing
* 8 mm Wide Tape * Cathode Indicated with a Band * Part is marked with three characters. The first two digits are found in
the attached table. The third digit is a date code.
THERMAL CHARACTERISTICS
Characteristic Total Device Dissipation FR-5 Board,* TA = 25C Derate above 25C Thermal Resistance Junction to Ambient Junction and Storage Temperature Range * FR-4 Minimum Pad Symbol PD 200 1.57 RqJA TJ, Tstg 635 -55 to +150 mW mW/C C/W C Max Unit
(c) Semiconductor Components Industries, LLC, 2000
1
January, 2000 - Rev. 2
Publication Order Number: MM3Z2V4T1/D
MM3Z2V4T1 SERIES
ELECTRICAL CHARACTERISTICS (VF = 0.9 V Max @ IF = 10 mA for all types.)
Test Current IZT mA 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Test Current IZT mA 2 2 2 Zener Voltage VZ (5%) Nominal (Note 1) 2.4 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 Zener Voltage VZ (5%) Nominal (Note 1) 27 33 75 ZZT IZ = IZT @ 10% Mod Max 100 90 90 80 60 40 10 15 15 15 15 20 20 25 30 30 40 45 55 55 70 ZZT IZ = IZT @ 10% Mod Max 80 80 255 dVZ/dt (mV/k) @ IZT1 = 5 mA Min -3.5 -3.5 -3.5 -3.5 -2.7 -2.0 0.4 1.2 2.5 3.2 3.8 4.5 5.4 6.0 7.0 9.2 10.4 12.4 14.4 16.4 18.4 Max 0 -2.5 0 0.2 1.2 2.5 3.7 4.5 5.3 6.2 7.0 8.0 9.0 10.0 11.0 13.0 14.0 16.0 18.0 20.0 22.0 C pF Max @ VR = 0 f = 1 MHz 450 450 450 260 225 200 185 155 140 135 130 130 130 130 120 110 105 100 85 85 80 C pF Max @ VR = 0 f = 1 MHz 70 70 35
Device MM3Z2V4T1 MM3Z3V9T1 MM3Z4V3T1 MM3Z4V7T1 MM3Z5V1T1 MM3Z5V6T1 MM3Z6V2T1 MM3Z6V8T1 MM3Z7V5T1 MM3Z8V2T1 MM3Z9V1T1 MM3Z10VT1 MM3Z11VT1 MM3Z12VT1 MM3Z13VT1 MM3Z15VT1 MM3Z16VT1 MM3Z18VT1 MM3Z20VT1 MM3Z22VT1 MM3Z24VT1
Marking 00 07 08 09 0A 0C 0E 0F 0G 0H 0K 0L 0M 0N 0P 0T 0U 0W 0Z 10 11
ZZK IZ = 0 5 mA 0.5 Max 1000 1000 1000 800 500 200 100 60 60 60 60 60 60 80 80 80 80 80 100 100 120
Max IR @ VR V mA 50 3 3 3 2 1 3 2 1 0.7 0.5 0.2 0.1 0.1 0.1 0.05 0.05 0.05 0.05 0.05 0.05 1 1 1 2 2 2 4 4 5 5 6 7 8 8 8 10.5 11.2 12.6 14 15.4 16.8
Device MM3Z27VT1 MM3Z33VT1 MM3Z75VT1
Marking 12 18 1G
ZZK IZ = 0 5 mA 0.5 Max 300 300 500
Max IR @ VR V mA 0.05 0.05 0.05 18.9 23.2 52.5
dVZ/dt (mV/k) Below @ IZT1 = 2 mA Min 21.4 27.4 73.4 Max 25.3 33.4 88.6
NOTE 1. Zener voltage is measured with a pulse test current (IZT) applied at an ambient temperature of 25C.
http://onsemi.com
2
MM3Z2V4T1 SERIES Typical Characteristics
1000 Z ZT, DYNAMIC IMPEDANCE ( ) TJ = 25C IZ(AC) = 0.1 IZ(DC) f = 1 kHz 1000 IF, FORWARD CURRENT (mA)
100
100
IZ = 1 mA 10 5 mA
10
150C
75C 1 3 10 VZ, NOMINAL ZENER VOLTAGE 80 1 0.4 0.5
25C 0.6
0C 1.1 1.2
0.7 0.8 0.9 1.0 VF, FORWARD VOLTAGE (V)
Figure 1. Effect of Zener Voltage on Zener Impedance
1000 TA = 25C I R , LEAKAGE CURRENT ( A) C, CAPACITANCE (pF) 0 V BIAS 1 V BIAS 1000 100 10 1 0.1 0.01 0.001
Figure 2. Typical Forward Voltage
100
+150C
10
BIAS AT 50% OF VZ NOM
+ 25C - 55C 0 10 20 30 40 50 VZ, NOMINAL ZENER VOLTAGE (V) 60 70
0.0001 1 4 10 VZ, NOMINAL ZENER VOLTAGE (V) 70 0.00001
Figure 3. Typical Capacitance
Figure 4. Typical Leakage Current
100 TA = 25C I Z , ZENER CURRENT (mA)
100
80 POWER DISSIPATION (%) 0 2 4 6 8 VZ, ZENER VOLTAGE (V) 10 12 10
60
1
40
0.1
20 0
0.01
0
25
50 75 100 TEMPERATURE (C)
125
150
Figure 5. Zener Voltage versus Zener Current (VZ Up to 12 V)
Figure 6. Steady State Power Derating
http://onsemi.com
3
MM3Z2V4T1 SERIES
PACKAGE DIMENSIONS
K A
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. LEAD THICKNESS SPECIFIED PER L/F DRAWING WITH SOLDER PLATING. 2
D
1
B
DIM A B C D E H J K
E C
MILLIMETERS INCHES MIN MAX MIN MAX 1.60 1.80 0.063 0.071 1.15 1.35 0.045 0.053 0.80 1.00 0.031 0.039 0.25 0.40 0.010 0.016 0.15 REF 0.006 REF 0.00 0.10 0.000 0.004 0.089 0.177 0.0035 0.0070 2.30 2.70 0.091 0.106
J
NOTE 3
H
STYLE 1: PIN 1. CATHODE 2. ANODE
CASE 477-02 ISSUE A SOD323
0.63 mm 0.025
1.60 mm 0.063 2.85 mm 0.112 mm inches
0.83 mm 0.033
SOD-323
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
North America Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor - European Support German Phone: (+1) 303-308-7140 (M-F 2:30pm to 5:00pm Munich Time) Email: ONlit-german@hibbertco.com French Phone: (+1) 303-308-7141 (M-F 2:30pm to 5:00pm Toulouse Time) Email: ONlit-french@hibbertco.com English Phone: (+1) 303-308-7142 (M-F 1:30pm to 5:00pm UK Time) Email: ONlit@hibbertco.com ASIA/PACIFIC: LDC for ON Semiconductor - Asia Support Phone: 303-675-2121 (Tue-Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong 800-4422-3781 Email: ONlit-asia@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-8549 Phone: 81-3-5740-2745 Email: r14525@onsemi.com Fax Response Line: 303-675-2167 800-344-3810 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative.
http://onsemi.com
4
MM3Z2V4T1/D

▲Up To Search▲

Price & Availability of ON2075

	To Download ON2075 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .