View HPU100-S033250_1009793.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

UNIVERSAL AC INPUT HARMONIC CORRECTION AC-DC 19" COMPATIBLE EUROCARD 100 WATTS MULTIPLE OUTPUT SWITCHING MODE POWER SUPPLIES HPU100 SERIES
FEATURES:
ACCOMMODATE UNIVERSAL AC SOURCES MEET IEC1000-3-2 HARMONIC CORRECTION MEET UNIVERSAL SAFETY STANDARDS 19" COMPATIBLE EUROCARD FORMAT EMI MEET EN 55022 & FCC CLASS B CE MARKING COMPLIANCE 3U X 10HP X 160MM VMEbus STANDARD
TOTAL POWER INT'L
SPECIFICATION
INPUT SPECIFICATION
Input Voltage: Typ. 90-264Vac with PFC. Input Connector: DIN 41612 at rear. Input Frequency: 47-63Hz. Inrush Current: Typ. <30.6A @ 230Vac. Input Current: 1.0A @ 115Vac, 0.5A @ 230Vac. Dielectric Withstand: Meet IEC950. EMI: Meet EN 55022 & FCC B. Power Factor Correction: Meet Harmonic Correction IEC1000-3-2 .PF typ. 0.97-0.98. Power Indicator: Green LED. Power OK Signal: Installed. Logic Inhibit: Installed. Hold-up Time: 20mS @ 115Vac & 230Vac. Earth Leakage: Less than 0.40mA @ 230Vac.
OUTPUT SPECIFICATION
Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Connector: DIN 41612 at rear. Line Regulation: Typ. 0.5%. Load Regulation: Main VO1 typ. 1-2.0%. Aux.VO2 typ. 2.0% (Mag. Amp.) Aux.VO3 typ. 3.0% (PR). Noise & Ripple: Typ. 1% peak to peak. OVP: Built-in at main VO1. Adjustability: Available at VO1 & VO2. Overload Protection (OLP): Fully protected against output overload and short circuit. Consult the factory for OLP setting. Operating Temperature: 0 to +50C full load. Derates from +50 to +70C by derating 2%/C. Storage Temperature: -25 to +85C. Temperature Coefficient: Typ. 0.04% /C. Cooling: Forced air flow is recommended for Ta > +50C full load operation. Construction format: 10HP(TE) X3UX160mm VMEbus standard Eurocard format.
GENERAL SPECIFICATION
Efficiency: Typ. 73-76%. Switching Frequency: Fixed frequency 83K Hz. Circuit Topology: Fixed frequency forward circuit. Transient Response: Output voltage returns in less than 3mS following a 25% load change. Safety Standard: IEC950/UL1950 Class I. Power Density: 2.0 Watt / Cubic Inch.
Note: All measurements are at nominal input, full load, and +25 unless otherwise specified.
OUTPUT VOLTAGE/CURRENT RATINGS CHART
SINGLE OUTPUT
MODEL NO. HPU100-S033250 HPU100-S050200
(HPU100-10)
DUAL OUTPUT
MAIN VO1 @# Typ. Volt. 25.0A 3.3V 20.0A 8.0A 7.5A 4.2A 3.6A 2.8A 2.1A 5.0V 12.0V 15.0V 24.0V 28.0V 36.0V 48.0V MODEL NO. HPU100-D050I
(HPU100-20)
MAIN VO1 @ Typ. Volt. 8.0A 4.2A 8.0A 3.4A 11.0A 11.0A 5.0V 12.0V 5.0V 15.0V 3.3V 3.3V
AUX. VO2 @ Typ. Volt. 5.0A 4.2A 4.0A 3.4A 5.0A 4.0A 12.0V 12.0V 15.0V 15.0V 12.0V 15.0V
HPU100-S120080 HPU100-S150075 HPU100-S240042
(HPU100-13)
HPU100-D120I
(HPU100-21)
HPU100-D050K HPU100-D150K
(HPU100-23)
HPU100-S280036 HPU100-S360028 HPU100-S480021
HPU100-D033I HPU100-D033K
TRIPLE OUTPUT
MODEL NO. HPU100-T050IE HPU100-T050KK
(HPU100-31)
MAIN VO1 @ Typ. Volt. 7.0A 5.0V 7.0A 7.0A 11.0A 10.0A 10.0A 5.0V 5.0V 3.3V 3.3V 3.3V
AUX. VO2 @ Typ. Volt. 5.0A 12.0V 4.0A 5.0A 9.0A 4.0A 5.0A 15.0V 12.0V 5.0V 15.0V 12.0V
AUX. VO3 Typ. Volt. 1.0A 5.0V 0.4A 0.5A 1.0A 0.6A 0.8A 15.0V 12.0V 12.0V 15.0V 12.0V
HPU100-T050II
(HPU100-32)
HPU100-T033EI HPU100-T033KK HPU100-T033II
Symbol: " " OVP built-in. "@" Adjustable. "#" Remote sensing. "" Magnetic Amplifier. "" Floating (or isolated) output. "" Installed with Post Regulator.
MECHANICAL DIMENSIONS: MM [INCHES]
WEIGHT: 920.0g (32.5 Oz.)
INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT
AC INPUT ASSIGNMENT CNTR & Pin# SINGLE OUTPUT NC 16,18, 24,26 DUAL OUTPUT +VO1 -VO1 +VO2 -VO2 4 6 8 10 NC 12,14,16 18,24,26 AC- AC- AC+VO1 +S -VO1 -S L N G 28 30 32 4,6 8 12,14 10 Status/ Control Log. +VO1 -VO1 +VO2 -VO2 +VO3 -VO3 NC P.Ok Inh. TRIPLE OUTPUT 4,6 8,10 12 14 16 18 24,26 20 22
Mating connector: DIN 41612-H15 Female

▲Up To Search▲

Price & Availability of HPU100-S033250

	To Download HPU100-S033250 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .