View NE52418_1027822.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

NEC's L TO S BAND LOW NOISE AMPLIFIER NPN GaAs HBT
FEATURES
* HIGH POWER GAIN: GA = 16 dB TYP , MSG = 18 dB TYP at f = 2 GHZ, VCE = 2 V, IC = 3 mA, ZS = ZL = 50 LOW NOISE: NF = 1.0 dB TYP at f = 2 GHZ, VCE = 2 V, IC = 3 mA, ZS = ZL = 50 OIP3 = +25 dBm TYP at f = 2 GHZ, VCE = 2 V, IC = 10 mA, ZS = ZOPT ,1TONE 4 PIN SUPER MINI MOLD PACKAGE GROUNDED EMITTER TRANSISTOR
+0.10 0.4 -0.05 0.3 1
NE52418
PACKAGE DIMENSIONS (Units in mm)
PACKAGE OUTLINE 18
2.1 0.2 1.25 0.1 +0.10 0.3 -0.05 (LEADS 2, 3, 4)
*
V45
2.0 0.2
0.65
2
3 0.65 1.3 0.65 4
* * *
0.60
DESCRIPTION
NEC's NE52418 is a low cost NPN GaAs HBT(InGaP) suitable for front end LNA's in L/S band mobile communications applications. The NE52418 is housed in a 4-pin super mini-mold package, making it ideal for high-density design. NEC's stringent quality assurance and test procedures ensure the highest reliability performance
0.9 0.1
0 to 0.1
+0.10 0.15 -0.05
PIN CONNECTIONS 1. Emitter 2. Base 3. Emitter 4. Collector
ELECTRICAL CHARACTERISTICS (TA = 25C)
PART NUMBER PACKAGE OUTLINE SYMBOLS IEBO ICBO hFE NF Ga |S21e|2 OIP3 PARAMETERS AND CONDITIONS Emitter to Base Leakage Current at VEBO = 3 V Collector to Base Leakage Current at VCBO = 3 V DC Current Gain at VCE = 2 V, IC = 3 mA Noise Figure at VCE = 2 V, IC = 3 mA, f = 2 Ghz, ZS = ZL = 50 Associated Gain at VCE = 2 V, IC = 3 mA, f = 2 Ghz, ZS = ZL = 50 Insertion Power Gain at VCE = 2 V, IC = 20 mA, f = 2 Ghz Out Third - Order Distortion Intercept Point at VCE = 2 V, f = 2 GHz, ZS = ZL = ZOPT, IC = 10 mA, 1 tone dB dBm -- -- 20 25 -- -- UNITS A A -- dB dB MIN -- -- 100 -- 14 NE52418 18 TYP 0.2 0.2 140 1.0 16 MAX 1.0 1.0 180 1.5 --
California Eastern Laboratories
NE52418 ABSOLUTE MAXIMUM RATINGS (TA = +25C)
SYMBOLS VCEO VCBO VEBO IC IB PT Tj TSTG PARAMETERS Collector to Emitter Voltage Collector to Base Voltage Emitter to Base Voltage Collector Current Base Current Total Power Dissipation Junction Temperature Storage Temperature UNITS V V V mA mA mW C C RATINGS 5.0 3.0 3.0 40 0.3 150 +125 -65 to +125
RECOMMENDED OPERATING CONDITIONS (TA = +25C)
SYMBOLS VCE IC PIN PARAMETERS Collector to Emitter Voltage Collector Current Input Power UNITS MIN. TYP. MAX. V mA dBm 1.5 - - 2.0 - - 3.0 30 0
Note: 1. Operation in excess of any of these parameters may result in permanent damage.
TYPICAL PERFORMANCE CURVE (TA = 25C)
NOISE FIGURE vs. FREQUENCY
1.4 1.2
Noise Figure, NF (dB)
1
0.8 0.6
0.4
0.2 0 0 1 2 3 4 5 2 V 5 mA 2 V 10 mA 6 7
Frequency, F (GHz)
TYPICAL SCATTERING PARAMETERS (TA = 25C)
NE52418 VCE = 2.0 V, IC = 3 mA
FREQUENCY GHz 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 13.0 13.5 14.0 MAG 0.601 0.505 0.438 0.384 0.346 0.328 0.327 0.326 0.344 0.366 0.382 0.402 0.431 0.46 0.516 0.572 0.617 0.664 0.699 0.720 0.728 0.720 0.701 0.643 0.587 S11 ANG -82.0 -98.5 -115.1 -132.3 -148.8 -166.8 178.2 164.7 152.8 140.7 130.2 120.3 110.9 102.2 94.2 87.1 78.8 73.4 66.5 61.6 55.5 49.1 43.4 38.2 36.7 MAG 5.571 4.898 4.405 4.008 3.645 3.333 3.100 2.894 2.708 2.573 2.445 2.320 2.209 2.124 2.023 1.912 1.782 1.663 1.513 1.373 1.228 1.073 0.910 0.737 0.523 S21 ANG 107.2 94.9 83.4 73.6 64.2 54.9 46.7 38.3 30.2 22.1 14.2 6.2 -2.5 -11.7 -21.2 -31.0 -41.3 -51.2 -61.8 -72.1 -83.1 -34.6 -107.7 -121.2 -137.3 MAG 0.064 0.067 0.073 0.077 0.078 0.083 0.085 0.094 0.099 0.108 0.121 0.128 0146 0.161 0.175 0.191 0.201 0.211 0.210 0.211 0.207 0.196 0.172 0.150 0.119 S12 ANG 47.4 41.0 38.5 38.5 39.2 38.7 41.0 41.7 41.6 41.6 40.7 37.2 35.6 32.0 26.1 19.7 13.7 6.4 -0.7 -9.0 -17.2 -26.2 -33.0 -39.8 -39.1 MAG 0.733 0.669 0.619 0.583 0.550 0.525 0.509 0.502 0.485 0.474 0.457 0.428 0.410 0.398 0.395 0.436 0.475 0.541 0.594 0.636 0.695 0.747 0.789 0.864 0.893 S22 ANG -38.7 -43.7 -48.5 -53.5 -58.7 -64.5 -70.7 -76.9 -84.4 -90.1 -97.9 -107.0 -117.1 -132.9 -151.4 -170.0 172.1 156.3 140.7 127.1 113.6 99.9 86.8 75.9 65.4
NE52418 TYPICAL SCATTERING PARAMETERS, cont. (TA = 25C)
NE52418 VCE = 2.0 V, IC = 10 mA
FREQUENCY GHz 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 13.0 13.5 14.0 MAG 0.306 0.237 0.191 0.170 0.160 0.167 0.181 0.195 0.216 0.245 0.266 0.295 0.325 0.370 0.423 0.476 0.528 0.580 0.620 0.640 0.651 0.636 0.600 0.516 0.482 S11 ANG -95.3 -111.7 -128.4 -148.2 -168.5 171.7 156.2 144.5 134.5 127.0 117.7 109.6 103.3 96.3 89.5 83.4 76.3 71.2 64.7 60.7 54.1 47.4 42.2 39.5 47.1 MAG 8.717 7.212 6.201 5.469 4.904 4.433 4.093 3.813 3.553 3.372 3.192 3.023 2.897 2.793 2.587 2.579 2.456 2.317 2.180 2.022 1.875 1.685 1.466 1.172 0.802 S21 ANG 91.6 82.2 73.3 65.9 58.7 51.4 44.6 37.7 30.7 23.7 16.8 9.8 2.0 -6.0 -14.5 -23.3 -33.0 -42.3 -52.8 -63.2 -74.8 -88.3 -103.2 -120.4 -139.8 MAG 0.051 0.060 0.067 0.077 0.086 0.094 0.106 0.115 0.126 0.133 0.143 0.152 0.165 0.179 0.188 0.201 0.208 0.210 0.213 0.212 0.205 0.191 0.173 0.145 0.112 S12 ANG 59.1 60.0 55.4 55.5 54.3 53.1 51.6 48.5 45.8 42.2 38.0 35.1 30.8 27.3 21.0 15.5 8.6 2.4 -5.5 -12.6 -20.4 -29.2 -37.2 -42.4 -39.1 MAG 0.556 0.512 0.478 0.451 0.430 0.412 0.398 0.389 0.376 0.363 0.343 0.311 0.293 0.271 0.260 0.292 0.337 0.403 0.461 0.522 0.588 0.660 0.731 0.834 0.891 S22 ANG -37.9 -40.1 -43.7 -47.6 -52.8 -57.5 -63.5 -69.9 -77.3 -82.9 -90.1 -97.6 -106.7 -123.9 -145.1 -166.3 172.9 156.1 141.9 128.6 115.5 103.2 90.1 78.2 56.2
NE52418 VCE = 2.0 V, IC = 20 mA
FREQUENCY GHz 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 13.0 13.5 14.0 MAG 0.188 0.140 0.117 0.116 0.124 0.146 0.164 0.184 0.207 0.238 0.262 0.292 0.322 0.362 0.412 0.471 0.517 0.565 0.607 0.630 0.635 0.616 0.574 0.476 0.442 S11 ANG -105.5 -124.6 -147.2 -170.3 169.2 150.9 138.1 129.5 124.1 116.7 110.1 102.7 97.6 91.4 85.1 79.6 72.9 68.3 62.5 58.3 51.3 44.7 39.1 37.7 48.7 MAG 9.306 7.618 6.514 5.708 5.092 4.595 4.239 3.929 3.675 3.470 3.278 3.108 2.971 2.857 2.753 2.641 2.513 2.387 2.264 2.091 1.960 1.783 1.571 1.265 0.859 S21 ANG 85.1 76.9 69.1 62.5 56.0 49.1 42.8 36.2 29.6 22.8 16.1 9.5 2.1 -5.7 -13.8 -22.4 -31.4 -40.7 -50.8 -60.7 -72.2 -85.7 -101.2 -119.6 -139.7 MAG 0.049 0.061 0.070 0.081 0.091 0.102 0.112 0.121 0.131 0.145 0.154 0.165 0.174 0.183 0.196 0.203 0.209 0.219 0.213 0.212 0.206 0.196 0.173 0.143 0.107 S12 ANG 63.2 63.4 63.2 61.0 58.6 56.2 52.0 49.2 45.9 42.3 37.9 33.5 27.1 24.6 19.0 13.6 6.2 -0.8 -7.8 -14.5 -22.0 -31.7 -40.0 -45.5 -43.6 MAG 0.489 0.453 0.429 0.415 0.390 0.349 0.361 0.350 0.336 0.323 0.299 0.267 0.246 0.221 0.210 0.243 0.292 0.359 0.424 0.476 0.548 0.619 0.700 0.815 0.887 S22 ANG -35.0 -37.3 -40.1 -44.6 -49.2 -55.5 -51.5 -67.5 -75.1 -81.2 -88.5 -96.6 -105.1 -124.7 -147.6 -171.7 167.0 151.4 137.4 124.7 113.2 101.4 89.7 78.0 66.5
NE52418 PACKAGE DIMENSIONS (Units in mm)
PACKAGE OUTLINE 18
2.1 0.2 1.25 0.1 +0.10 0.3 -0.05 (LEADS 2, 3, 4)
ORDERING INFORMATION
PART NUMBER NE52418-T1-A QUANTITY 3 K pcs/Reel
2.0 0.2
0.65
2
3 0.65 1.3 0.65 4
Note: 8-mm wide embossed tape, pin 3 (Emitter), pin 4 (Collector) face perforated side of tape.
V45
0 to 0.1
0.60 1 +0.10 0.4 -0.05 0.3
0.9 0.1
+0.10 0.15 -0.05
PIN CONNECTIONS 1. Emitter 2. Base 3. Emitter 4. Collector
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your CEL Sales Representative. SOLDERING METHOD Infrared Reflow SOLDERING CONDITIONS Package Peak Temperature: 230 C or below Time: 30 seconds or less ( at 210 C) Count: 3, Exposure limit: None1 Package Peak Temperature: 215 C or below Time: 40 seconds or less (at 200 C) Count: 2, Exposure limit: None1 Soldering Bath Temperature: 260 C or below Time: 10 seconds or less (at 200 C) Count: 1, Exposure limit: None1 Pin Temperature: 300 C or below Time: 3 seconds or less (per side of device) Exposure limit: None1 RECOMMENDED CONDITION SYMBOL IR30-00-3
VPS
VP15-00-2
WAVE SOLDERING
WS60-00-1
PARTIAL HEATING
-
Note: 1. After opening the dry pack, keep it in a place below 25 C and 65% RH for the allowable storage period. CAUTION: Do not use different soldering methods together (except for partial heating). PRECAUTION: Avoid high static voltage and electric fields.
NE52418 NONLINEAR MODEL
2.1 0.2
SCHEMATIC
2.0 0.2 0.65 2
1.25 0.1
+0.10 0.3 -0.05 (LEADS 2, 3, 4)
3
0.65 1.3
0.60
0.65
1 +0.10 0.4 -0.05 0.3
4
0.9 0.1
0 to 0.1
+0.10 0.15 -0.05
BJT NONLINEAR MODEL PARAMETERS (1)
Parameters IS BF NF VAF IKF ISE NE BR NR VAR IKR ISC NC RE RB RBM IRB RC CJE VJE MJE CJC VJC Q1 7.8e-25 158 1.006 1000 1.95 6.36e-18 1.92 1 1 1000 1000 0 2.0 1.5 7 1 1000 1.2 0.27 0.99 0.21 0.065e-12 0.73 Parameters MJC XCJC CJS VJS MJS FC TF XTF VTF ITF PTF TR EG XTB XTI KF AF Q1 0.07 0.2 0 0.75 0 0.5 2e-12 3 1 0.05 0 50e-12 1.51 0 3 0 1
ADDITIONAL PARAMETERS
Parameters CCB CCE LB LC LE CCBPKG CCEPKG CBEPK LBX LCX LEX NE52418 0.02e-12 0.19e-12 0.83e-9 0.8e-9 0.2e-9 0.002e-12 0.05e-12 0.15e-12 0.55e-9 0.1e-9 0.05e-9
MODEL RANGE Frequency: 0.3 to 10 GHz Bias: VCE = 0.7 V to 2 V, IC = 1 mA to 10 mA Date: 02/2002
(1) Gummel-Poon Model
Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale.
04/22/03
A Business Partner of NEC Compound Semiconductor Devices, Ltd.
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information.
Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*)
If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.

▲Up To Search▲

Price & Availability of NE52418

	To Download NE52418 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .