View 5962-8761702X_1036453.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ISO-9001 CERTIFIED BY DSCC
M.S.KENNEDY CORP.
4707 Dey Road Liverpool, N.Y. 13088
VERY HIGH LEVEL DIGITAL DRIVER
0008
(315) 701-6751
FEATURES:
MIL-PRF-38534 QUALIFIED
Single Supply Operation From 10V to 45V Replaces NH/DH0008 'And' Input Logic With Expander External Transition Time Control Output Current to 3A Peak Available to DSCC SMD 5962-87617
DESCRIPTION:
MSK0008
The MSK 0008 is an integrated high voltage, high current driver designed to accept standard DTL or TTL logic levels and drive a pulsed load of up to 3A at 28V. AND inputs are provided along with an Expander connection, should additional gating be required. The addition of an external capacitor and resistor provides control of the rise and fall times of the output. The device is packaged in a hermetic 10 pin can.
EQUIVALENT SCHEMATIC
TYPICAL APPLICATIONS TYPICAL APPLICATIONS
Logic Level Translator Relay Driver Lamp Driver High Level Line Driver 1 1 2 3 4 5
PIN-OUT INFORMATION
Vcc Input Input Expander NC 10 9 8 7 6 Output NC Response Time Control NC Ground Rev. - 6/02
ABSOLUTE MAXIMUM RATINGS

TC TJ
ELECTRICAL SPECIFICATIONS
Parameter Power Supply Range
2
Test Conditions Continuous
1
Group A Subgroup 1,2,3 1,2,3 1,2,3 1,2,3 1,2,3 1,2,3 1,2,3 1,2,3 1,2,3 1,2,3 4 4 4 4 10
MSK0008H/E Min. 2.0 26.5 43 -1.0 Typ. 28 27 43.5 25 1 25 0.5 6 200 3 0.6 8 25 Max. 45 5.5 0.8 100 5 100 2.0 8 500 4.0 1.0 10 35 Min. 10 2.0 26 42.5 -1.1 -
MSK0008 Typ. 28 27 43.5 25 1 25 0.5 6 200 3 0.6 8 25 Max. 45 5.5 0.8 125 10 150 2.2 8.5 550 4.2 1.1 10.2 40
Logic 1 Input Voltage 2 Logic 0 Input Voltage 2 Logic 1 Output Voltage Logic 0 Output Voltage Logic 1 Input Current
2
10V VCC 45V 10V VCC 45V VCC=28V VIN=2V RL=39
2 VCC=45V VIN=2V IO=1.6A
VIN=0.8V RL=100 VIN=2.4V VIN=5.5V VIN=0.4V VIN=0V VIN=2.0V VCC=28V RL=39 VCC=28V RL=39
Logic 0 Input Current 2 Off Supply Current On Supply Current Rise Time Fall Time Turn On Time Turn Off Time
27 27 2
VCC=28V RL=39 VCC=28V RL=39 Junction to Case @ TC=125C
Thermal Resistance
NOTES:
1 2 3 4 5 6 VCC=45V, Cf/Rf=NC and IOUT=0mA unless otherwise specified. Guaranteed by design but not tested. Typical parameters are representative of actual device performance at 25C but are for reference only. Industrial grade and "E" suffix devices shall be tested to subgroups 1 and 4 unless otherwise requested. Military grade devices ("H" suffix) shall be 100% tested to subgroups 1,2,3 and 4. Subgroup 5 and 6 testing available upon request. Subgroup 1,4 TC=+25C Subgroup 2,5 TC=+125C Subgroup 3,6 TA=-55C 7 Measured from 50% of VIN to 90% of VOUT transition.
2
Rev. - 6/02

VCC IOUT VIN IIN
Supply Voltage (t 0.1 sec) Output Current (50mS) Input Voltage Expander Input Current
60V 3A 5.5V 5mA
TST TLD
Storage Temperature Range -65C to +150C Lead Temperature Range 300C (10 Seconds) Case Operating Temperature (MSK 0008H/E) -55C to +125C (MSK 0008) -40C to +85C Junction Temperature 175C
Units V V V V V mV A A mA mA mA nS S S S C/W
APPLICATION NOTES
3
Rev. - 6/02
TYPICAL PERFORMANCE CURVES
4
Rev. - 6/02
MECHANICAL SPECIFICATIONS
MSK0008
ESD TRIANGLE INDICATES PIN 1. ALL DIMENSIONS ARE 0.010 INCHES UNLESS OTHERWISE LABELED.
ORDERING INFORMATION
Part Number MSK0008 MSK0008E MSK0008H 5962-8761702X Screening Level Industrial Extended Reliability Mil-PRF-38534 Class H DSCC-SMD
4707 Dey Road, Liverpool, New York 13088 Phone (315) 701-6751 FAX (315) 701-6752 www.mskennedy.com
The information contained herein is believed to be accurate at the time of printing. MSK reserves the right to make changes to its products or specifications without notice, however, and assumes no liability for the use of its products. Please visit our website for the most recent revision of this datasheet.
M.S. Kennedy Corp.
5
Rev. - 6/02

▲Up To Search▲

Price & Availability of 5962-8761702X

	To Download 5962-8761702X Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .