|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Features Bushing mount Cost saving; pre-phased Highly readable clockface readout Easy mounting Model 3600 is currently available, although not recommended for new designs. Model 3610 w/Model CT-23 or CT-26 is preferred. 3600 - 10-Turn Precision Knobpot(R) Electrical Characteristics1 Standard Resistance Range ...................................................................................100 to 100 K ohms Total Resistance Tolerance ...........................................................................................................5 % Effective Electrical Angle ...............................................................................................3600 nominal Absolute Minimum Resistance.................................1 ohm or 0.1 % maximum (whichever is greater) Noise.............................................................................................................100 ohms ENR maximum Dielectric Withstanding Voltage (MIL-STD-202, Method 301) Sea Level ..........................................................................................................1,000 VAC minimum 70,000 Feet..........................................................................................................400 VAC minimum Power Rating (Voltage Limited By Power Dissipation or 385 VAC, Whichever is Less) +25 C ................................................................................................................................1.5 watts +85 C......................................................................................................................................0 watt Insulation Resistance (500 VDC)..................................................................1,000 megohms minimum Resolution ........................................................................................See recommended part numbers Accuracy (Correlation of Dial Readout to Voltage Ratio Output) .........................0.5 % voltage ratio Repeatability of Dial Readout ...............................................................................0.1 % voltage ratio 9 8 7 6 5 4 K 0 BPOT NO 1 2 3 19.10 DIA. (3/4) 8.73 (11/32) 25.40 .80 (1.00 .03) NON-TURN PIN EXTENDS 1.70 .13 (.067 .005) 19.10 (3/4) DIA. PILOT DIA. 10.26 .05 (.404 .002) 3/8 "- 32 UNEF-2A THD 3.96 1.52 (.156) MAX. - (.060) MIN. PANEL THICKNESS #21 AWG GOLD PLATED GRADE A .724 NICKEL SOLDER LUGS (.0285) DIA. LOCATED ON .05 RADIUS 3.18 .79 (1/8 1/32) 1.40 .38 (.055 .015) I.D. Environmental Characteristics 1 Operating Temperature Range.....................................................................................+1 C to +85 C Storage Temperature Range.......................................................................................-65 C to +85 C Temperature Coefficient Over Storage Temperature Range........................50 ppm/C maximum/unit Vibration .........................................................................................................................................10 G Wiper Bounce ...........................................................................................0.1 millisecond maximum Total Resistance Shift ..............................................................................................2 % maximum Voltage Ratio Shift ................................................................................................0.2 % maximum Shock .............................................................................................................................................50 G Wiper Bounce ...........................................................................................0.1 millisecond maximum Total Resistance Shift ..............................................................................................2 % maximum Voltage Ratio Shift ................................................................................................0.2 % maximum Load Life ............................................................................................................1,000 hours, 1.5 watts Total Resistance Shift ..............................................................................................2 % maximum Rotational Life (No Load) ..............................................................................100,000 shaft revolutions Total Resistance Shift ..............................................................................................2 % maximum Moisture Resistance (MIL-STD-202, Method 103, Condition B) Total Resistance Shift ..............................................................................................2 % maximum IP Rating ........................................................................................................................................IP 60 NON-TURN PIN EXTENDS 1.70 .13 (.067 .005) 2 1 3 4.76 .79 (3/16 1/32) 1.98 + .08/ - .03 DIA. (.078 +.003/-.001) Mechanical Characteristics1 Stop Strength.........................................................................................14 N-cm (20 oz.-in.) minimum Mechanical Angle ......................................................................................................3600 +20 , -0 Torque (Starting) .........................................................0.21 to 5.65 N-cm (0.3 to 8.0 oz.-in.) maximum Torque (Running) ...............................................................................5.65 N-cm (8.0 oz.-in.) maximum Variation ........................................................................................0.71 N-cm (1.0 oz.-in.) maximum Mounting.............................................................................170-200 N-cm (15-18 lb.-in.) maximum Backlash ........................................................................................................................1.0 maximum Weight..................................................................................................................Approximately 17 gm Terminals ..............................................................................................................Gold-plated J-Hooks Soldering Condition....................Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025" wire diameter. Maximum temperature 399 C (750 F) for 3 seconds. No wash process to be used with no clean flux. Markings ..............................Manufacturer's name and part number, resistance value and tolerance, linearity tolerance, wiring diagram, and date code. 1 7.11 (.280) 10.41 .08 (.410 .003) PANEL HOLE PATTERN TOLERANCES: EXCEPT WHERE NOTED .25 .13 DECIMALS: .XX .XXX (.010), (.005) FRACTIONS: 1/64 MM DIMENSIONS: (IN.) At room ambient: +25 C nominal and humidity nominal, except as noted. 2 CCW WIPER Recommended Part Numbers Part Number 3600S-1-102 3600S-1-502 3600S-1-103 Resistance () 1,000 5,000 10,000 Resolution (%) .035 .027 .022 BOLDFACE LISTINGS ARE IN STOCK AND READILY AVAILABLE THROUGH DISTRIBUTION. FOR OTHER OPTIONS CONSULT FACTORY. 1 CLOCKWISE 3 CW REV. 07/06 "Knobpot" is a registered trademark of Bourns, Inc. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. |
Price & Availability of 3600S-1-102 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |