View Q67040S4726_1095252.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TrenchStop Series
IGW75N60T q
Low Loss IGBT in Trench and Fieldstop technology
* * * * * Very low VCE(sat) 1.5 V (typ.) Maximum Junction Temperature 175 C Short circuit withstand time - 5s Designed for : - Frequency Converters - Uninterrupted Power Supply Trench and Fieldstop technology for 600 V applications offers : - very tight parameter distribution - high ruggedness, temperature stable behavior - very high switching speed - low VCE(sat) Positive temperature coefficient in VCE(sat) Low EMI Low Gate Charge Complete product spectrum and PSpice Models : http://www.infineon.com/igbt/ VCE 600V IC 75A VCE(sat),Tj=25C 1.5V Tj,max 175C Marking Code G75T60 Package TO-247
C
G
E
P-TO-247-3-1 (TO-220AC)
* * * *
Type IGW75N60T
Ordering Code Q67040S4726
Maximum Ratings Parameter Collector-emitter voltage DC collector current, limited by Tjmax TC = 25C TC = 100C Pulsed collector current, tp limited by Tjmax Turn off safe operating area (VCE 600V, Tj 175C) Gate-emitter voltage Short circuit withstand time
1)
Symbol VCE IC
Value 600 150 75
Unit V A
ICpuls VGE tSC Ptot Tj Tstg -
225 225 20 5 428 -40...+175 -55...+175 260 V s W C
VGE = 15V, VCC 400V, Tj 150C Power dissipation TC = 25C Operating junction temperature Storage temperature Soldering temperature, 1.6mm (0.063 in.) from case for 10s
1)
Allowed number of short circuits: <1000; time between short circuits: >1s. 1 Rev. 2.1 Dec-04
Power Semiconductors
TrenchStop Series
Thermal Resistance Parameter Characteristic IGBT thermal resistance, junction - case Thermal resistance, junction - ambient Electrical Characteristic, at Tj = 25 C, unless otherwise specified Parameter Static Characteristic Collector-emitter breakdown voltage Collector-emitter saturation voltage V ( B R ) C E S V G E = 0V, I C = 0. 2mA VCE(sat) V G E = 15V, I C = 75A T j = 25 C T j = 17 5 C Gate-emitter threshold voltage Zero gate voltage collector current VGE(th) ICES I C = 1. 2mA, V C E = V G E V C E = 600V , V G E = 0V T j = 25 C T j = 17 5 C Gate-emitter leakage current Transconductance Integrated gate resistor Dynamic Characteristic Input capacitance Output capacitance Reverse transfer capacitance Gate charge Internal emitter inductance measured 5mm (0.197 in.) from case Short circuit collector current1) IC(SC) V G E = 1 5V,t S C 5s V C C = 400V, T j 150 C Ciss Coss Crss QGate LE V C E = 25V, V G E = 0V, f= 1 M Hz V C C = 4 80V, I C = 75A V G E = 1 5V T O -247-3- 1 IGES gfs RGint V C E = 0V ,V G E = 2 0V V C E = 20V, I C = 75A 4.1 600 Symbol Conditions RthJA TO-247 AC RthJC TO-247 Symbol Conditions
IGW75N60T q
Max. Value 0.35 40 Unit K/W
Value min. Typ. 1.5 1.9 4.9 max. 2.0 5.7
Unit
V
A 41 40 1000 100 nA S
4620 288 137 470 7 687.5
-
pF
nC nH A
1)
Allowed number of short circuits: <1000; time between short circuits: >1s. 2 Rev. 2.1 Dec-04
Power Semiconductors
TrenchStop Series
Switching Characteristic, Inductive Load, at Tj=25 C Parameter IGBT Characteristic Turn-on delay time Rise time Turn-off delay time Fall time Turn-on energy
1)
IGW75N60T q
Value min. Typ. 33 36 330 35 2.0 2.5 4.5 max. mJ Unit
Symbol
Conditions
td(on) tr td(off) tf Eon Eoff Ets
Turn-off energy Total switching energy
T j = 25 C, V C C = 4 00V, I C = 75A, V G E = 0/ 1 5V , R G = 5, L 2 ) = 100nH, C 2 ) =39pF Energy losses include "tail" and diode reverse recovery.
ns
Switching Characteristic, Inductive Load, at Tj=175 C Parameter IGBT Characteristic Turn-on delay time Rise time Turn-off delay time Fall time Turn-on energy
1)
Symbol
Conditions
Value min. Typ. 32 37 363 38 2.9 2.9 5.8 max. -
Unit
td(on) tr td(off) tf Eon Eoff Ets
Turn-off energy Total switching energy
T j = 17 5 C, V C C = 4 00V, I C = 75A, V G E = 0/ 1 5V , R G = 5 L 2 ) = 100nH, C 2 ) =39pF Energy losses include "tail" and diode reverse recovery.
ns
mJ
1) 2)
Includes Reverse Recovery Losses from IKW75N60T due to dynamic test circuit in Figure E. Leakage inductance L and Stray capacity C due to dynamic test circuit in Figure E.
Power Semiconductors
3
Rev. 2.1 Dec-04
TrenchStop Series
IGW75N60T q
t p=1s
200A
100A
10s
IC, COLLECTOR CURRENT
50A T C =80C 00A T C =110C
IC, COLLECTOR CURRENT
50s 10A
50A
Ic
1ms DC 10ms
Ic
0A 10H z 100H z 1kH z 10kH z 100kH z
1A
1V
10V
100V
1000V
f, SWITCHING FREQUENCY Figure 1. Collector current as a function of switching frequency (Tj 175C, D = 0.5, VCE = 400V, VGE = 0/+15V, RG = 5)
VCE, COLLECTOR-EMITTER VOLTAGE Figure 2. Safe operating area (D = 0, TC = 25C, Tj 175C; VGE=15V)
400W 350W 300W 250W 200W 150W 100W 50W 0W 25C 50C 75C 100C 125C 150C
120A
IC, COLLECTOR CURRENT
POWER DISSIPATION
90A
60A
Ptot,
30A
0A 25C
75C
125C
TC, CASE TEMPERATURE Figure 3. Power dissipation as a function of case temperature (Tj 175C)
TC, CASE TEMPERATURE Figure 4. DC Collector current as a function of case temperature (VGE 15V, Tj 175C)
Power Semiconductors
4
Rev. 2.1 Dec-04
TrenchStop Series
IGW75N60T q
120A
V GE =20V 15V
120A
IC, COLLECTOR CURRENT
IC, COLLECTOR CURRENT
V GE =20V 15V
90A
13V 11V 9V 7V
90A
13V 11V 9V 7V
60A
60A
30A
30A
0A 0V 1V 2V 3V
0A 0V 1V 2V 3V
VCE, COLLECTOR-EMITTER VOLTAGE Figure 5. Typical output characteristic (Tj = 25C)
VCE, COLLECTOR-EMITTER VOLTAGE Figure 6. Typical output characteristic (Tj = 175C)
VCE(sat), COLLECTOR-EMITT SATURATION VOLTAGE
2.5V
80A
IC =150A
IC, COLLECTOR CURRENT
2.0V IC =75A
60A
1.5V
40A T J = 1 7 5 C 20A 2 5 C
1.0V
IC =37.5A
0.5V
0A
0.0V
0V
2V
4V
6V
8V
0C
50C
100C
150C
VGE, GATE-EMITTER VOLTAGE Figure 7. Typical transfer characteristic (VCE=20V)
TJ, JUNCTION TEMPERATURE Figure 8. Typical collector-emitter saturation voltage as a function of junction temperature (VGE = 15V)
Power Semiconductors
5
Rev. 2.1 Dec-04
TrenchStop Series
IGW75N60T q
t d(off)
t, SWITCHING TIMES
100ns tf
t, SWITCHING TIMES
t d(off)
100ns tf tr t d(on)
t d(on)
tr 10ns 0A 40A 80A 120A
10ns
5
10
15
IC, COLLECTOR CURRENT Figure 9. Typical switching times as a function of collector current (inductive load, TJ=175C, VCE = 400V, VGE = 0/15V, RG = 5, Dynamic test circuit in Figure E)
RG, GATE RESISTOR Figure 10. Typical switching times as a function of gate resistor (inductive load, TJ = 175C, VCE= 400V, VGE = 0/15V, IC = 75A, Dynamic test circuit in Figure E)
7V
t d(off)
VGE(th), GATE-EMITT TRSHOLD VOLTAGE
6V m ax. 5V 4V 3V 2V 1V 0V -50C m in. typ.
t, SWITCHING TIMES
100ns
tr
tf
t d(on) 25C 50C 75C 100C 125C 150C
0C
50C
100C
150C
TJ, JUNCTION TEMPERATURE Figure 11. Typical switching times as a function of junction temperature (inductive load, VCE = 400V, VGE = 0/15V, IC = 75A, RG=5, Dynamic test circuit in Figure E)
TJ, JUNCTION TEMPERATURE Figure 12. Gate-emitter threshold voltage as a function of junction temperature (IC = 1.2mA)
Power Semiconductors
6
Rev. 2.1 Dec-04
TrenchStop Series
IGW75N60T q
*) Eon and Ets include losses due to diode recovery
Ets*
*) E on a nd E ts include losses d ue to diode re co ve ry 8.0m J E ts *
E, SWITCHING ENERGY LOSSES
12.0mJ
E, SWITCHING ENERGY LOSSES
Eon* 8.0mJ
6.0m J
4.0m J E on * 2.0m J E off 0.0m J
Eoff 4.0mJ
0.0mJ 0A 20A 40A 60A 80A 100A 120A 140A
0
5
10
15
IC, COLLECTOR CURRENT Figure 13. Typical switching energy losses as a function of collector current (inductive load, TJ = 175C, VCE = 400V, VGE = 0/15V, RG = 5, Dynamic test circuit in Figure E)
RG, GATE RESISTOR Figure 14. Typical switching energy losses as a function of gate resistor (inductive load, TJ = 175C, VCE = 400V, VGE = 0/15V, IC = 75A, Dynamic test circuit in Figure E)
*) Eon and Ets include losses due to diode recovery 5.0mJ
*) E on and E ts include losses
Ets*
due to diode recovery
E, SWITCHING ENERGY LOSSES
4.0mJ
E, SWITCHING ENERGY LOSSES
8m J
6m J E ts * 4m J
E on *
3.0mJ
Eoff
2.0mJ Eon* 1.0mJ
E off 2m J
0.0mJ 25C
50C
75C
100C 125C 150C
0m J 300V
350V
400V
450V
500V
550V
TJ, JUNCTION TEMPERATURE Figure 15. Typical switching energy losses as a function of junction temperature (inductive load, VCE = 400V, VGE = 0/15V, IC = 75A, RG = 5, Dynamic test circuit in Figure E)
VCE, COLLECTOR-EMITTER VOLTAGE Figure 16. Typical switching energy losses as a function of collector emitter voltage (inductive load, TJ = 175C, VGE = 0/15V, IC = 75A, RG = 5, Dynamic test circuit in Figure E)
Power Semiconductors
7
Rev. 2.1 Dec-04
TrenchStop Series
IGW75N60T q
VGE, GATE-EMITTER VOLTAGE
C iss
1 5V
120 V 1 0V 48 0V
c, CAPACITANCE
1nF
C oss
5V
100pF
C rss
0V 0nC
1 00n C
20 0nC
30 0nC
400 nC
0V
10V
20V
QGE, GATE CHARGE Figure 17. Typical gate charge (IC=75 A)
VCE, COLLECTOR-EMITTER VOLTAGE Figure 18. Typical capacitance as a function of collector-emitter voltage (VGE=0V, f = 1 MHz)
12s
IC(sc), short circuit COLLECTOR CURRENT
1000A
SHORT CIRCUIT WITHSTAND TIME
10s 8s 6s 4s 2s 0s 10V
750A
500A
250A
tSC,
0A 12V
14V
16V
18V
11V
12V
13V
14V
VGE, GATE-EMITTETR VOLTAGE Figure 19. Typical short circuit collector current as a function of gateemitter voltage (VCE 400V, Tj 150C)
VGE, GATE-EMITETR VOLTAGE Figure 20. Short circuit withstand time as a function of gate-emitter voltage (VCE=600V, start at TJ=25C, TJmax<150C)
Power Semiconductors
8
Rev. 2.1 Dec-04
TrenchStop Series
IGW75N60T q
D=0.5
ZthJC, TRANSIENT THERMAL RESISTANCE
10 K/W
-1
0.2 0.1 0.05
R,(K/W) 0.1968 0.0733 0.0509 0.02 0.0290
10 K/W
-2
, (s) 0.115504 0.009340 0.000823 0.000119
R2
0.01 R 1
C1= 1/R1
C2=2/R2
single pulse 10 K/W 1s
-3
10s 100s
1ms
10ms 100ms
tP, PULSE WIDTH Figure 21. IGBT transient thermal resistance (D = tp / T)
Power Semiconductors
9
Rev. 2.1 Dec-04
TrenchStop Series
IGW75N60T q
dimensions
TO-247AC
symbol
[mm] min max 5.28 2.51 2.29 1.32 2.06 3.18 21.16 16.15 5.72 20.68 4.930 6.22 min 4.78 2.29 1.78 1.09 1.73 2.67 20.80 15.65 5.21 19.81 3.560 3.61 6.12
[inch] max 0.2079 0.0988 0.0902 0.0520 0.0811 0.1252 0.8331 0.6358 0.2252 0.8142 0.1941 0.2449 0.1882 0.0902 0.0701 0.0429 0.0681 0.1051 0.8189 0.6161 0.2051 0.7799 0.1402 0.2409
A B C D E F G H K L M N
P
0.76 max
0.0299 max
0.1421
Q
Power Semiconductors
10
Rev. 2.1 Dec-04
TrenchStop Series
i,v diF /dt
IGW75N60T q
tr r =tS +tF Qr r =QS +QF tr r
IF
tS QS
tF 10% Ir r m t VR
Ir r m
QF
dir r /dt 90% Ir r m
Figure C. Definition of diodes switching characteristics
1
Tj (t) p(t)
r1
r2
2
n
rn
r1
r2
rn
Figure A. Definition of switching times
TC
Figure D. Thermal equivalent circuit
Figure B. Definition of switching losses
Figure E. Dynamic test circuit
Power Semiconductors
11
Rev. 2.1 Dec-04
TrenchStop Series
IGW75N60T q
Published by Infineon Technologies AG, Bereich Kommunikation St.-Martin-Strasse 53, D-81541 Munchen (c) Infineon Technologies AG 2004 All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide (see address list). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.
Power Semiconductors
12
Rev. 2.1 Dec-04

▲Up To Search▲

Price & Availability of Q67040S4726

	To Download Q67040S4726 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .