View QSX1_1092614.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

QSX1
Transistors
General purpose amplification (15V, 6A)
QSX1
Application Low frequency amplifier External dimensions (Unit : mm)
2.8 1.6
ROHM : TSMT6
Each lead has same dimensions
Abbreviated symbol : X01
Absolute maximum ratings (Ta=25C)
Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage
Collector current Power dissipation Junction temperature Range of storage temperature
Equivalent Circuit
Unit V V V A A mW W C C
6pin 5pin 4pin
Symbol VCBO VCEO VEBO IC ICP PC Tj Tstg
Limits 15 12 6 6 10 500 1.25 150 -55 to +150
1
2 3
1pin
2pin
3pin
1 Single pulse, Pw=1ms 2 Each Terminal Mounted on a Recommended 3 Mounted on a 25mmx25mmx t 0.8mm Ceramic substrate
Electrical characteristics (Ta=25C)
Parameter Symbol Min. Typ. Max. Unit BVCBO BVCEO BVEBO ICBO IEBO VCE (sat) hFE fT Cob 15 12 6 - - - 270 - - - - - - - 80 - 250 80 - - - 100 100 200 680 - - V V V nA nA mV - pF IC=10A IC=1mA IE=10A VCB=15V VEB=6V IC/IB=3A/60mA VCE/IC=2V/500mA VCB=10V, IE=0A, f=1MHz
Conditions
Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current Collector-emitter saturation voltage DC current gain Transition frequency Collector output capacitance
Pulsed
MHz VCE=2V, IE= -500mA, f=100MHz
0.85
Features 1) Collector current is large. 2) Collector saturation voltage is low. VCE(sat) 200mV at IC = 3A / IB = 60mA
(1)
(4) (5) (6)
0.4
0.16
(3) (2)
2.9
Rev.A
1/2
QSX1
Transistors
Packaging specifications
Package
Type
Taping
TR 3000
Code Basic ordering unit (pieces)
QSX1
Electrical characteristic curves
1000
Ta=125C
VCE=2V Pulsed
1
IC/IB=20/1 Pulsed
1
IC/IB=50/1 Pulsed
Ta=125C Ta=25C Ta= -40C
Ta=25C
COLLECTOR SATURATION VOLTAGE : VCE (sat) (V)
0.1
Ta=125C Ta=25C Ta= -40C
COLLECTOR SATURATION VOLTAGE : VCE (sat) (V)
DC CURRENT GAIN : hFE
0.1
Ta= -40C
0.01
0.01
100 0.001
0.01
0.1
1
10
0.001 0.001
0.01
0.1
1
10
0.001 0.001
0.01
0.1
1
10
COLLECTOR CURRENT : IC (A)
COLLECTOR CURRENT : IC (A)
COLLECTOR CURRENT : IC (A)
Fig.1 DC current gain vs. collector current
Fig.2 Collector-emitter saturation voltage vs. collector current
Fig.3 Collector-emitter saturation voltage vs. collector current
BASE SATURATION VOLTAGE : VBE (sat) (V)
10
COLLECTOR CURRENT : IC (A)
IC/IB=20/1 Pulsed
10
EMITTER INPUT CAPACITANCE : Cib (pF) COLLECTOR OUTPUT CAPACITANCE : Cob (pF)
VCE=2V Pulsed
10000
IC=0A f=1MHz Ta=25C
1
Ta= -40C Ta=25C Ta=125C
Ta=125C Ta=25C Ta= -40C
1000
Cib
1
Cob
100
0.1 0.001
0.01
0.1
1
10
0.1
0
1
10
10 0.001
0.01
0.1
1
10
100
COLLECTOR CURRENT : IC (A)
BASE TO EMITTER CURRENT : VBE (V)
EMITTER TO BASE VOLTAGE : VEB (V) COLLECTOR TO BASE VOLTAGE : VCB (V)
Fig.4 Base-emitter saturation voltage vs. collector current
Fig.5 Grounded emitter propagation characteristics
Fig.6 Collector output capacitance vs. collector-base voltage Emitter input capacitance vs. emitter-base voltage
1000
TRANSITION FREQUENCY : fT (MHz)
VCE=2V Ta=25C f=100MHz
100
10 0.01
0.1
1
10
EMITTER CURRENT : IE (A)
Fig.7 Gain bandwidth product vs. emitter current
Rev.A
2/2
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.1

▲Up To Search▲

Price & Availability of QSX1

	To Download QSX1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .