View EMC1152_1116293.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

EMC1152 SST Compliant Hardware Monitor with Two Temperature Channels and Five Voltage Channels
PRODUCT FEATURES
GENERAL DESCRIPTION The EMC1152 is a one-wire sensor that is capable of monitoring up to five voltages and two temperature zones for an Intel PC platform containing an SST host. The two temperature zones consist of an internal temperature diode and an externally connected temperature diode. In cooperation with a host device, thermal management and fan control can be performed. Communication takes place over a one-wire SST based interface. The internal 11-bit delta-sigma ADC architecture provides superb linearity, high accuracy, and excellent noise immunity. APPLICATIONS Desktop PCs, Servers and Workstations FEATURES Single Wire Interface (SST based)
-- -- -- -- SST 1.0 compliant Fixed Address, Discoverable Device Three programmable addresses Supports FCS Abort functionality not available in SST 0.9 compliant devices
Data Brief Resistance Error Correction Ideality Configuration Beta Compensation (EMC1152-1)
-- EMC1152 configured to measure 2N3904 diode -- EMC1152-1 configured to measure CPU substrate diode
External Temperature Monitor
-- 0.125C resolution -- 1C Accuracy (50C to 70C) -- Diode Fault Reporting
Internal Temperature Monitor
-- Range -40C to +125C -- 0.125C resolution -- 2C Accuracy (40C to 70C)
Voltage Monitor:
-- 12V, 5V, 3.3V, 2.5V, VCCP inputs -- 2% Total Unadjusted Error -- 11-bit resolution
Supply
-- 3.0V to 3.6V
SIMPLIFIED BLOCK DIAGRAM
EMC1152
Switching Current External Temp Register Analog Mux and Anti-Alias Filter Configuration Register SST One-Wire Interface ADD
DP DN Internal Temp Diode Attenuator bank 12V 5V 3.3V 2.5V VCCP
11-bit delta-sigma ADC
Internal Temp Register
Digital Mux and Byte Interlock
Voltage Registers
Status Register
SST
SMSC EMC1152
PRODUCT PREVIEW
Revision 2.55 (12-06-06)
SST Compliant Hardware Monitor with Two Temperature Channels and Five Voltage Channels
ORDER NUMBERS:
EMC1152-AIZL-TR FOR 10 PIN, MSOP LEAD-FREE ROHS COMPLIANT PACKAGE EMC1152-1-AIZL-TR FOR 10 PIN, MSOP LEAD-FREE ROHS COMPLIANT PACKAGE
80 Arkay Drive Hauppauge, NY 11788 (631) 435-6000 FAX (631) 273-3123
Copyright (c) 2006 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC's standard Terms of Sale Agreement dated before the date of your order (the "Terms of Sale Agreement"). The product may contain design defects or errors known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSC's website at http://www.smsc.com. SMSC is a registered trademark of Standard Microsystems Corporation ("SMSC"). Product names and company names are the trademarks of their respective holders. SMSC DISCLAIMS AND EXCLUDES ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND AGAINST INFRINGEMENT AND THE LIKE, AND ANY AND ALL WARRANTIES ARISING FROM ANY COURSE OF DEALING OR USAGE OF TRADE. IN NO EVENT SHALL SMSC BE LIABLE FOR ANY DIRECT, INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES; OR FOR LOST DATA, PROFITS, SAVINGS OR REVENUES OF ANY KIND; REGARDLESS OF THE FORM OF ACTION, WHETHER BASED ON CONTRACT; TORT; NEGLIGENCE OF SMSC OR OTHERS; STRICT LIABILITY; BREACH OF WARRANTY; OR OTHERWISE; WHETHER OR NOT ANY REMEDY OF BUYER IS HELD TO HAVE FAILED OF ITS ESSENTIAL PURPOSE, AND WHETHER OR NOT SMSC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Revision 2.55 (12-06-06)
PRODUCT PREVIEW
2
SMSC EMC1152
Package Outline
Revision 2.55 (12-06-06) 3 PRODUCT PREVIEW SMSC EMC1152
SST Compliant Hardware Monitor with Two Temperature Channels and Five Voltage Channels
REVISIO N HISTORY
3
5
R E VISION A
D ESC R IPTION IN ITIA L RELEASE
D ATE 3/29/05
R ELE AS ED BY S.K .ILIEV
D e
PIN 1 IDENTIFIER AREA (D/2 X E1/2)
c
4
3
E1
E
4
2
10X b
SEE DETAIL "A"
TOP VIEW
END VIEW
A2 C A
SEATING PLANE
A1
ccc C
SIDE VIEW
3-D VIEW
H C 0.25
SEATING PLANE GAU GE PLANE
NO TES: 1. ALL DIM ENSIONS ARE IN MILLIM ETER. 2. TOLERANCE ON THE TRUE POSITION OF EACH LEAD IS 0.04 m m AT M AXIMUM MATERIAL CONDITION. 3. PA CKAGE BODY DIM ENSIONS "D" AND "E1" DO NOT INCLUDE MOLD/INTERLEAD PROTRUSIONS OR FLASH. M AX IM UM M OLD PROTRUSIONS OR FLASH IS 0.15 m m (0.006 INCHES) PER END AND SIDE. DIM ENSIONS "D" AND "E1" ARE DE TERMINED AT THE OUTERMOS T EXTREMES OF THE PLASTIC B ODY, INCLUDING ANY MISMATCH BETWEEN TOP AND BOTTOM PLASTIC B ODY. THEY ARE DE TERMINED AT DATUM PLA NE "H". 4. DIMENSIONS "b" A ND "c" APPLY TO THE FLAT SECTION OF THE LEAD BETWEEN 0.08 mm AND 0.15 m m FROM THE LEAD TIP. 5. DETAILS OF THE PIN 1 IDENTIFIER ARE OPTIONAL, BUT MUST BE LOCATED W ITHIN THE ZONE INDICA TED.
0 - 8
L (0.95)
U N LES S O TH ER W ISE SPECIFIED D IM EN S IO NS A RE IN MILLIMETERS AN D TO LERANCES ARE: D EC IMAL X.X 0.1 X.XX 0.05 X.X XX 0.025 A N G U LAR 1
THIRD A NGLE P ROJE CT ION
80 A R KAY DRIVE H AU P PAU G E, N Y 11788 U SA
TITLE
DETAIL "A"
D IM AN D TO L P ER A SM E Y14.5M - 1994
M A TE RIAL
NAME
DRAWN
DATE
-
S.K.ILIEV
C HECKED
3/29/05 3/29/05
SCALE
PACKAGE O UTLINE 10 PIN TSSO P, 3x3 MM BODY, 0.50 M M PITCH
D WG NUM BER
F IN ISH
S.K.ILIEV
A PPR OVED
MO-10-TSSOP-3x3
S TD C OM PLIANCE SHEET
REV
A 1 OF 1
P RIN T W ITH "S C ALE TO FIT" D O N O T S C ALE DRAW ING
S.K.ILIEV
3/29/05
1:1
JEDEC: MO -187
Figure 1 EMC1152 10-Pin MSOP Package Drawing

▲Up To Search▲

Price & Availability of EMC1152

	To Download EMC1152 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .