 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SUBMINIATURE SOLID STATE LAMP AM2520SGD09 SUPER BRIGHT GREEN Features SUBMINIATURE PACKAGE. WIDE VIEWING ANGLE. Z-BEND LEAD. LONG LIFE - SOLID STATE RELIABILITY. LOW PACKAGE PROFILE. PACKAGE : 1000PCS / REEL. RoHS COMPLIANT. Description The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAB7508 APPROVED: J. Lu REV NO: V.5 CHECKED: Allen Liu DATE: MAR/07/2005 DRAWN: Y.W.WANG PAGE: 1 OF 4 ERP:1202000647 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. AM2520SGD09 SUPER BRIGHT GREEN (GaP) GREEN DIFFUSED 2.6 Typ. 10 Viewing Angle 21/2 40 Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25C Symbol peak D 1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Green Super Bright Green Super Bright Green Super Bright Green Super Bright Green Super Bright Green Typ. 565 568 30 15 2.2 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR= 5V Absolute Maximum Ratings at TA=25C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Super Bright Green 105 25 140 5 -40C To +85C Units mW mA mA V SPEC NO: DSAB7508 APPROVED: J. Lu REV NO: V.5 CHECKED: Allen Liu DATE: MAR/07/2005 DRAWN: Y.W.WANG PAGE: 2 OF 4 ERP:1202000647 Super Bright Green AM2520SGD09 SPEC NO: DSAB7508 APPROVED: J. Lu REV NO: V.5 CHECKED: Allen Liu DATE: MAR/07/2005 DRAWN: Y.W.WANG PAGE: 3 OF 4 ERP:1202000647 AM2520SGD09 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength), the condition as follows: 1.Wavelength: +/-1nm (Test condition is based on the sorting standard). 2.Luminous intensity: +/-15% (Test condition is based on the sorting standard). 3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard). SPEC NO: DSAB7508 APPROVED: J. Lu REV NO: V.5 CHECKED: Allen Liu DATE: MAR/07/2005 DRAWN: Y.W.WANG PAGE: 4 OF 4 ERP:1202000647 |
Price & Availability of AM2520SGD09
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |