 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| S2S3/S2S4 S2S3/S2S4 s Features 1. Popular type 2. Small package type 3. Conforming to UL double protective insulation (Viso : 3 750Vrms) 4. Infrared reflow soldering type (230C, within 30 seconds) 5. Recognized by UL (No.64380) Mini-Flat Type Phototriac Coupler s Outline Dimensions 0.6 MAX. 2.54 0.25 (Unit : mm) Model No. 4 3 Internal connection diagram 4 3 * Zero-cross circuit 1 2 s Model Line-ups For 100/200V line Zero-cross circuit not built in Zero-cross circuit built in S2S3 Anode mark 1 2 0.4 0.1 4.4 0.2 3.6 0.3 C0.4 (Input side) 2.6 0.2 * The zero-cross circuit for S2S4 5.3 0.3 0.2 0.05 + 0.5 - 0.4 0.2 + 7.0 - 0.2 0.7 S2S4 1. For SSR 6 0.1 0.1 s Application 1 Anode 2 Cathode 3 Anode/ Cathode 4 Anode/ Cathode s Absolute Maximum Ratings Parameter Forward current Input Reverse voltage *1 RMS ON-state current Output *2 Peak one cycle surge current Repetitive peak OFF-state voltage *3 Isolation voltage Operating temperature Storage temperature *4 Soldering temperature Symbol IF VR IT Isurge VDRM Viso Topr Tstg Tsol Rating 50 6 0.05 0.6 (50Hz sine wave) 600 3 750 - 30 to+100 - 40 to+125 260 (Ta=25C) Unit mA V Arms A V Vrms C C C IT (A) 0 1 0.2 mm or more 2 * IT 1, 2<= 90 2 180 90 360 *1 The definition of conduction angle of RMS ON-state current IT should be as shown in the right drawing. For decrease curve, refer to Fig. 2. *2 50Hz sine curve *3 40 to 60% RH, AC for 1 minute *4 For 10 seconds Soldering area " In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device." S2S3/S2S4 s Electro-optical Characteristics Parameter Forward voltage Reverse current Repetitive peak OFF-state current ON-state voltage Holding current Critical rate of rise of OFF-state voltage Zero-cross voltage S2S4 Minimum trigger current Insulation resistance S2S3 Turn-on time S2S4 Symbol VF IR IDRM VT IH dv/dt VOX IFT RISO ton Conditions IF = 20mA VR = 3V VDRM = Rated IT = 0.05A VD = 6V VDRM = 1/ 2 * Rated IF = 15mA, Resistance load VD = 6V, RL = 100 DC500V, 40 to 60% RH VD = 6V, RL = 100 , IF = 20mA MIN. 0.1 100 5 x 1010 TYP. 1.2 1 000 1 x 1011 (Ta=25C) MAX. 1.4 10 1 2.5 3.5 35 10 100 50 Unit V A A V mA V/ s V mA s Input Output Transfer characteristics Fig. 1 Forward Current vs. Ambient Temperature 60 Fig. 2 RMS ON-state Current vs. Ambient Temperature 60 RMS ON-state current IT (mArms) 50 50 Forward current IF (mA) 40 40 30 30 20 20 10 10 0 - 30 0 50 100 0 - 30 0 50 100 Ambient temperature Ta (C) Ambient temperature Ta (C) |
Price & Availability of S2S3
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |