 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| IMD23 Transistors General purpose (dual digital transistors) IMD23 Features 1) Both the DTB113Z chip and DTC114E chip in a SMT package. 2) Mounting possible with SMT3 automatic mounting machines. 3) Transistor elements are independent, eliminating interference. 4) Mounting cost and area can be cut in half. External dimensions (Unit : mm) IMD23 0.95 0.95 1.9 2.9 0.8 0to0.1 (6) 0.3 (4) (5) 1.6 2.8 0.15 (3) (2) (1) 0.3to0.6 Each lead has same dimensions Structure Epitaxial planar type NPN / PNP silicon transistor (Built-in resistor type) ROHM : SMT6 EIAJ : SC-74 Abbreviated symbol : D23 Equivalent circuits IMD23 (4) (5) (6) R2 DTr2 R2 (3) DTr1=(R1/R2=1k/10k) DTr2=(R1/R2=10k/10k) (2) (1) R1 DTr1 R1 Absolute maximum ratings (Ta=25C) DTr1 Parameter Supply voltage Input voltage Output current Power dissipation Junction temperature Storage temperature Symbol VCC VIN IC Pd Tj Tstg Limits -50 -10 to +5 -500 300(Total) 150 -55 to +150 Unit V V mA mW C C 200mW per element must not be a exceeded. 1.1 1/4 IMD23 Transistors DTr2 Parameter Supply voltage Input voltage Output current Power dissipation Junction temperature Storage temperature Symbol VCC VIN IO IC (Max.) Pd Tj Tstg Limits 50 -10 to +40 50 100 300 (TOTAL) 150 -55 to +150 Unit V V mA mW C C 200mW per element must not be exceeded. Electrical characteristics (Ta=25C) DTr1 Parameter Input voltage Output voltage Input current Output current DC current gain Input resistance Resistance ratio Transition frequency Transition frequency of the device Symbol VI(off) VI(on) VO(on) II IO(off) GI R1 R2/R1 fT Min. - -3 - - - 56 0.7 8 - Typ. - - - - - - 1 10 200 Max. -0.3 - -0.3 -7.2 -0.5 - 1.3 12 - Unit V V mA A - k - MHz Conditions VCC= -5V, IO= -100A VO= -0.3V, IO= -20mA IO/II= -50mA/-2.5mA VI= -5V VCC= -50V, VI=0V VO= - 5V, IO= -50mA - - VCE= -10V, IE=50mA, f=100MHz DTr2 Parameter Input voltage Output voltage Input current Output current DC current gain Transition frequency Input resistance Resistance ratio Symbol VI (off) VI (on) VO (on) II IO (off) GI fT Min. - 3 - - - 30 - Typ. - - 0.1 - - - 250 Max. 0.5 - 0.3 0.88 0.5 - - Unit V V mA A - MHz Conditions VCC=5V, IO=100A VO=0.3V, IO=10mA IO=10mA, II=0.5mA VI=5V VCC=50V, VI=0V VO=5V, IO=5mA VCE=10V, IE=-5mA, f=100MHz R1 R2/R1 7 0.8 10 1 13 1.2 k - - - Transition frequency of the device 2/4 IMD23 Transistors Packaging specifications Package Code Type Taping T110 3000 Basic ordering unit (pieces) IMD23 Electrical characteristic curves DTr1 (PNP) -100 -50 (V) -10m -5m VO= -0.3V OUTPUT CURRENT : Io (A) VCC= -5V 1k 500 DC CURRENT GAIN : GI VO= -5V Ta=100 C 25 C -40 C -2m -1m -500 -200 -100 -50 -20 -10 -5 -2 -1 0 (on) -20 -10 -5 -2 -1 -500m -200m -100m -500 -1m -2m -5m -10m -20m -50m-100m-200m -500m Ta= -40 C 25 C 100 C 200 100 50 20 10 5 2 INPUT VOLTAGE : VI Ta=100 C 25 C -40 C -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 1 -500 -1m -2m -5m -10m -20m -50m-100m-200m -500m OUTPUT CURRENT : IO (A) INPUT VOLTAGE : VI (off) (V) OUTPUT CURRENT : IO (A) Fig.1 Input voltage vs. output current (ON characteristics) Fig.2 Output current vs. input voltage (OFF characteristics) Fig.3 DC current gain vs. output current -1 -500m OUTPUT VOLTAGE : VO (on) (V) lO/lI=20 Ta=100 C 25 C -40 C -200m -100m -50m -20m -10m -5m -2m -1m -500 -1m -2m -5m -10m -20m -50m-100m-200m -500m OUTPUT CURRENT : IO (A) Fig.4 Output voltage vs. output current 3/4 IMD23 Transistors DTr2 (NPN) 100 50 VO=0.3V 10m 5m OUTPUT CURRENT : Io (A) VCC=5V 1k 500 DC CURRENT GAIN : GI VO=5V Ta=100C 25C -40C INPUT VOLTAGE : VI (on) (V) 20 10 5 2 1 500m 200m 100m 100 200 500 1m 2m 5m 10m 20m 50m 100m Ta=-40C 25C 100C 2m 1m 500 200 100 50 20 10 5 2 1 0 Ta=100C 25C -40C 200 100 50 20 10 5 2 0.5 1 1.5 2 2.5 3 1 100 200 5001m 2m 5m 10m 20m 50m100m OUTPUT CURRENT : IO (A) INPUT VOLTAGE : VI (off) (V) OUTPUT CURRENT : IO (A) Fig.5 Input voltage vs. output current (ON characteristics) Fig.6 Output current vs. input voltage (OFF characteristics) Fig.7 DC current gain vs. output current 1 500m OUTPUT VOLTAGE : VO (on) (V) lO/lI=20 Ta=100C 25C -40C 200m 100m 50m 20m 10m 5m 2m 1m 100 200 500 1m 2m 5m 10m 20m 50m 100m OUTPUT CURRENT : IO (A) Fig.8 Output voltage vs. output current 4/4 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1 |
Price & Availability of IMD23
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |