 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MMBT2222ATT1 Preferred Device General Purpose Transistor NPN Silicon These transistors are designed for general purpose amplifier applications. They are housed in the SOT-416/SC-75 package which is designed for low power surface mount applications. http://onsemi.com COLLECTOR 3 MAXIMUM RATINGS (TA = 25C) Rating Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Collector Current - Continuous Symbol VCEO VCBO VEBO IC Max 40 75 6.0 600 Unit Vdc Vdc Vdc mAdc 3 Symbol PD RJA TJ, Tstg Max 150 833 -55 to +150 Unit mW 1 C/W C CASE 463 SOT-416/SC-75 STYLE 1 2 1 BASE 2 EMITTER THERMAL CHARACTERISTICS Characteristic Total Device Dissipation (Note 1) TA = 25C Thermal Resistance, Junction-to-Ambient Operating and Storage Junction Temperature Range Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. Device mounted on FR4 glass epoxy printed circuit board using the minimum recommended footprint. MARKING DIAGRAM 1P M 1 1P M = Specific Device Code = Date Code ORDERING INFORMATION Device MMBT2222ATT1 Package SOT-416 Shipping 3000 / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. Preferred devices are recommended choices for future use and best overall value. (c) Semiconductor Components Industries, LLC, 2004 1 September, 2004 - Rev. 2 Publication Order Number: MMBT2222ATT1/D MMBT2222ATT1 ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Characteristic Symbol Min Max Unit OFF CHARACTERISTICS Collector -Emitter Breakdown Voltage(1) (IC = 1.0 mAdc, IB = 0) Collector -Base Breakdown Voltage (IC = 10 mAdc, IE = 0) Emitter -Base Breakdown Voltage (IE = 10 mAdc, IC = 0) Base Cutoff Current (VCE = 60 Vdc, VEB = 3.0 Vdc) Collector Cutoff Current (VCE = 60 Vdc, VEB = 3.0 Vdc) V(BR)CEO V(BR)CBO V(BR)EBO IBL ICEX 40 75 6.0 -- -- -- -- -- 20 10 Vdc Vdc Vdc nAdc nAdc ON CHARACTERISTICS (Note 2) DC Current Gain (IC = 0.1 mAdc, VCE = 10 Vdc) (IC = 1.0 mAdc, VCE = 10 Vdc) (IC = 10 mAdc, VCE = 10 Vdc) (IC = 150 mAdc, VCE = 10 Vdc) (IC = 500 mAdc, VCE = 10 Vdc) Collector -Emitter Saturation Voltage (IC = 150 mAdc, IB = 15 mAdc) (IC = 500 mAdc, IB = 50 mAdc) Base -Emitter Saturation Voltage (IC = 150 mAdc, IB = 15 mAdc) (IC = 500 mAdc, IB = 50 mAdc) HFE 35 50 75 100 40 VCE(sat) -- -- VBE(sat) 0.6 -- 1.2 2.0 0.3 1.0 Vdc -- -- -- -- -- Vdc -- SMALL-SIGNAL CHARACTERISTICS Current -Gain -- Bandwidth Product (IC = 20 mAdc, VCE = 20 Vdc, f = 100 MHz) Output Capacitance (VCB = 10 Vdc, IE = 0, f = 1.0 MHz) Input Capacitance (VEB = 0.5 Vdc, IC = 0, f = 1.0 MHz) Input Impedance (VCE = 10 Vdc, IC = 10 mAdc, f = 1.0 kHz) Voltage Feedback Ratio (VCE = 10 Vdc, IC = 10 mAdc, f = 1.0 kHz) Small -Signal Current Gain (VCE = 10 Vdc, IC = 10 mAdc, f = 1.0 kHz) Output Admittance (VCE = 10 Vdc, IC = 10 mAdc, f = 1.0 kHz) Noise Figure (VCE = 10 Vdc, IC = 100 mAdc, RS = 1.0 k ohms, f = 1.0 kHz) fT Cobo Cibo hie hre hfe hoe NF 300 -- -- 0.25 -- 75 25 -- -- 8.0 30 1.25 4.0 375 200 4.0 MHz pF pF k ohms X 10- 4 -- mmhos dB SWITCHING CHARACTERISTICS Delay Time Rise Time Storage Time Fall Time (VCC = 3.0 Vdc, VBE = - 0.5 Vdc, IC = 150 mAdc, IB1 = 15 mAdc) (VCC = 30 Vdc, IC = 150 mAdc, IB1 = IB2 = 15 mAdc) td tr ts tf -- -- -- -- 10 25 225 60 ns ns 2. Pulse Test: Pulse Width 300 ms, Duty Cycle 2.0%. http://onsemi.com 2 MMBT2222ATT1 SWITCHING TIME EQUIVALENT TEST CIRCUITS +30 V +16 V 0 -2 V 1.0 to 100 s, DUTY CYCLE 2.0% 1 k < 2 ns 200 +16 V 0 CS* < 10 pF -14 V < 20 ns 1.0 to 100 s, DUTY CYCLE 2.0% 1k 1N914 +30 V 200 CS* < 10 pF -4 V Scope rise time < 4 ns *Total shunt capacitance of test jig, connectors, and oscilloscope. Figure 1. Turn-On Time Figure 2. Turn-Off Time 1000 700 500 hFE , DC CURRENT GAIN 300 200 TJ = 125C 25C 100 70 50 30 20 10 0.1 0.2 0.3 0.5 0.7 1.0 2.0 -55C VCE = 1.0 V VCE = 10 V 3.0 5.0 7.0 10 20 IC, COLLECTOR CURRENT (mA) 30 50 70 100 200 300 500 700 1.0 k Figure 3. DC Current Gain VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) 1.0 TJ = 25C 0.8 IC = 1.0 mA 0.6 10 mA 150 mA 500 mA 0.4 0.2 0 0.005 0.01 0.02 0.03 0.05 0.1 0.2 0.3 0.5 1.0 IB, BASE CURRENT (mA) 2.0 3.0 5.0 10 20 30 50 Figure 4. Collector Saturation Region http://onsemi.com 3 MMBT2222ATT1 200 100 70 50 t, TIME (ns) 30 20 10 7.0 5.0 3.0 2.0 5.0 7.0 10 200 300 20 30 50 70 100 IC, COLLECTOR CURRENT (mA) 500 IC/IB = 10 TJ = 25C tr @ VCC = 30 V td @ VEB(off) = 2.0 V td @ VEB(off) = 0 500 300 200 100 70 50 30 20 10 7.0 5.0 ts = ts - 1/8 tf VCC = 30 V IC/IB = 10 IB1 = IB2 TJ = 25C t, TIME (ns) tf 5.0 7.0 10 20 30 50 70 100 IC, COLLECTOR CURRENT (mA) 200 300 500 Figure 5. Turn -On Time Figure 6. Turn -Off Time 10 8.0 IC = 1.0 mA, RS = 150 500 A, RS = 200 100 A, RS = 2.0 k 50 A, RS = 4.0 k RS = OPTIMUM RS = SOURCE RS = RESISTANCE 10 f = 1.0 kHz 8.0 NF, NOISE FIGURE (dB) IC = 50 A 100 A 500 A 1.0 mA NF, NOISE FIGURE (dB) 6.0 6.0 4.0 4.0 2.0 0 0.01 0.02 0.05 0.1 0.2 2.0 0 50 0.5 1.0 2.0 5.0 10 20 50 100 100 200 500 1.0 k 2.0 k 5.0 k 10 k 20 k 50 k 100 k f, FREQUENCY (kHz) RS, SOURCE RESISTANCE (OHMS) Figure 7. Frequency Effects f T, CURRENT-GAIN BANDWIDTH PRODUCT (MHz) Figure 8. Source Resistance Effects 30 20 CAPACITANCE (pF) Ceb 10 7.0 5.0 Ccb 3.0 2.0 0.1 500 VCE = 20 V TJ = 25C 300 200 100 70 50 1.0 2.0 3.0 5.0 7.0 10 20 30 IC, COLLECTOR CURRENT (mA) 50 70 100 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 REVERSE VOLTAGE (VOLTS) 20 30 50 Figure 9. Capacitances Figure 10. Current-Gain Bandwidth Product http://onsemi.com 4 MMBT2222ATT1 1.0 TJ = 25C 0.8 VBE(sat) @ IC/IB = 10 0.6 VBE(on) @ VCE = 10 V 0.4 COEFFICIENT (mV/ C) V, VOLTAGE (VOLTS) 1.0 V 0 -0.5 -1.0 -1.5 -2.0 VCE(sat) @ IC/IB = 10 0 0.1 0.2 50 100 200 0.5 1.0 2.0 5.0 10 20 IC, COLLECTOR CURRENT (mA) 500 1.0 k -2.5 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 IC, COLLECTOR CURRENT (mA) 500 RqVB for VBE RqVC for VCE(sat) +0.5 0.2 Figure 11. "On" Voltages Figure 12. Temperature Coefficients http://onsemi.com 5 MMBT2222ATT1 PACKAGE DIMENSIONS SC-75/SOT-416 CASE 463-01 ISSUE C -A- S 2 3 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. DIM A B C D G H J K L S MILLIMETERS MIN MAX 0.70 0.90 1.40 1.80 0.60 0.90 0.15 0.30 1.00 BSC --- 0.10 0.10 0.25 1.45 1.75 0.10 0.20 0.50 BSC INCHES MIN MAX 0.028 0.035 0.055 0.071 0.024 0.035 0.006 0.012 0.039 BSC --- 0.004 0.004 0.010 0.057 0.069 0.004 0.008 0.020 BSC G -B- 1 D 3 PL 0.20 (0.008) M B K 0.20 (0.008) A J C L H STYLE 1: PIN 1. BASE 2. EMITTER 3. COLLECTOR ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082-1312 USA Phone: 480-829-7710 or 800-344-3860 Toll Free USA/Canada Fax: 480-829-7709 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Phone: 81-3-5773-3850 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. http://onsemi.com 6 MMBT2222ATT1/D |
Price & Availability of MMBT2222ATT1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |