View PBSS5160DS_1175313.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PBSS5160DS
60 V, 1 A PNP low VCEsat (BISS) transistor
Rev. 02 -- 28 June 2005 Product data sheet
1. Product profile
1.1 General description
PNP/PNP low VCEsat Breakthrough in Small Signal (BISS) transistor pair in a SOT457 (SC-74) Surface Mounted Device (SMD) plastic package. NPN complement: PBSS4160DS.
1.2 Features
s s s s s Low collector-emitter saturation voltage VCEsat High collector current capability: IC and ICM High collector current gain (hFE) at high IC High efficiency due to less heat generation Smaller required Printed-Circuit Board (PCB) area than for conventional transistors
1.3 Applications
s Dual low power switches (e.g. motors, fans) s Automotive applications
1.4 Quick reference data
Table 1: Symbol VCEO IC ICM RCEsat
[1] [2]
Quick reference data Parameter collector-emitter voltage collector current (DC) peak collector current collector-emitter saturation resistance single pulse; tp 1 ms IC = -1 A; IB = -100 mA
[2]
Conditions open base
[1]
Min -
Typ 250
Max -60 -1 -2 330
Unit V A A m
Device mounted on a ceramic PCB, Al2O3, standard footprint. Pulse test: tp 300 s; 0.02.
Philips Semiconductors
PBSS5160DS
60 V, 1 A PNP low VCEsat (BISS) transistor
2. Pinning information
Table 2: Pin 1 2 3 4 5 6 Pinning Description emitter TR1 base TR1 collector TR2 emitter TR2 base TR2 collector TR1
1 2
sym018
Simplified outline
6 5 4
Symbol
6 5 4
TR2 1 2 3 TR1
3
3. Ordering information
Table 3: Ordering information Package Name PBSS5160DS SC-74 Description plastic surface mounted package; 6 leads Version SOT457 Type number
4. Marking
Table 4: Marking codes Marking code A5 Type number PBSS5160DS
5. Limiting values
Table 5: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol VCBO VCEO VEBO IC Parameter Conditions Min [1] [2] [3]
Max -80 -60 -5 -0.77 -0.9 -1 -2 -300 -1
Unit V V V A A A A mA A
Per transistor collector-base voltage open emitter collector-emitter voltage emitter-base voltage collector current (DC) open base open collector
-
ICM IB IBM
peak collector current base current (DC) peak base current
single pulse; tp 1 ms single pulse; tp 1 ms
9397 750 15186
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 02 -- 28 June 2005
2 of 14
Philips Semiconductors
PBSS5160DS
60 V, 1 A PNP low VCEsat (BISS) transistor
Table 5: Limiting values ...continued In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Ptot Parameter Conditions
[1] [2] [3]
Min -65 -65
Max 290 370 450 420 560 700 150 +150 +150
Unit mW mW mW mW mW mW C C C
total power dissipation Tamb 25 C
Per device Ptot total power dissipation Tamb 25 C
[1] [2] [3]
Tj Tamb Tstg
[1] [2] [3]
junction temperature ambient temperature storage temperature
Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for collector 1 cm2. Device mounted on a ceramic PCB, Al2O3, standard footprint.
0.8 Ptot (W) 0.6
(1)
006aaa493
(2)
(3)
0.4
0.2
0 0 40 80 120 160 Tamb (C)
(1) Ceramic PCB, Al2O3, standard footprint (2) FR4 PCB, mounting pad for collector 1 cm2 (3) FR4 PCB, standard footprint
Fig 1. Power derating curves
9397 750 15186
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 02 -- 28 June 2005
3 of 14
Philips Semiconductors
PBSS5160DS
60 V, 1 A PNP low VCEsat (BISS) transistor
6. Thermal characteristics
Table 6: Symbol Rth(j-a) Thermal characteristics Parameter thermal resistance from junction to ambient Conditions in free air
[1] [2] [3]
Min -
Typ -
Max 431 338 278 105
Unit K/W K/W K/W K/W
Per transistor
Rth(j-sp)
thermal resistance from junction to solder point thermal resistance from junction to ambient in free air
[1] [2] [3]
Per device Rth(j-a) 298 223 179 K/W K/W K/W
[1] [2] [3]
Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for collector 1 cm2. Device mounted on a ceramic PCB, Al2O3, standard footprint.
103 Zth(j-a) (K/W) 102 0.20 0.10 0.05 10 0.02 0.01 =1 0.75 0.50 0.33
006aaa494
0 1 10-5 10-4 10-3 10-2 10-1 1 10 102 tp (s) 103
FR4 PCB, standard footprint
Fig 2. Transient thermal impedance from junction to ambient as a function of pulse time; typical values
9397 750 15186
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 02 -- 28 June 2005
4 of 14
Philips Semiconductors
PBSS5160DS
60 V, 1 A PNP low VCEsat (BISS) transistor
103 Zth(j-a) (K/W) 102 0.20 0.10 0.05 10 0.02 0.01 =1 0.75 0.50 0.33
006aaa495
0 1 10-5 10-4 10-3 10-2 10-1 1 10 102 tp (s) 103
FR4 PCB, mounting pad for collector 1 cm2
Fig 3. Transient thermal impedance from junction to ambient as a function of pulse time; typical values
103 Zth(j-a) (K/W) 102
006aaa496
=1 0.75 0.50 0.20 0.10 0.05 0.33
10
0.02 0.01 0
1 10-5
10-4
10-3
10-2
10-1
1
10
102 tp (s)
103
Ceramic PCB, Al2O3, standard footprint
Fig 4. Transient thermal impedance from junction to ambient as a function of pulse time; typical values
9397 750 15186
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 02 -- 28 June 2005
5 of 14
Philips Semiconductors
PBSS5160DS
60 V, 1 A PNP low VCEsat (BISS) transistor
7. Characteristics
Table 7: Characteristics Tamb = 25 C unless otherwise specified. Symbol ICBO Parameter collector-base cut-off current Conditions VCB = -60 V; IE = 0 A VCB = -60 V; IE = 0 A; Tj = 150 C Min 200
[1] [1]
Typ 350 250 160 -110 -120 -250
Max -100 -50 -100 -100 -165 -175 -330
Unit nA A nA nA
Per transistor
ICES IEBO hFE
collector-emitter cut-off VCE = -60 V; VBE = 0 V current emitter-base cut-off current DC current gain VEB = -5 V; IC = 0 A VCE = -5 V; IC = -1 mA VCE = -5 V; IC = -500 mA VCE = -5 V; IC = -1 A
150 100 -
VCEsat
collector-emitter saturation voltage
IC = -100 mA; IB = -1 mA IC = -500 mA; IB = -50 mA IC = -1 A; IB = -100 mA
[1] [1]
mV mV mV V m V ns ns ns ns ns ns MHz pF
-
VBEsat RCEsat VBEon td tr ton ts tf toff fT Cc
[1]
base-emitter saturation IC = -1 A; IB = -50 mA voltage collector-emitter saturation resistance base-emitter turn-on voltage delay time rise time turn-on time storage time fall time turn-off time transition frequency collector capacitance VCE = -10 V; IC = -50 mA; f = 100 MHz VCB = -10 V; IE = ie = 0 A; f = 1 MHz IC = -1 A; IB = -100 mA IC = -1 A; VCE = -5 V IC = -0.5 A; IBon = -25 mA; IBoff = 25 mA
-0.95 -1.1 250 330
[1]
[1]
-0.82 -0.9 11 30 41 205 55 260 185 9 15
150 -
Pulse test: tp 300 s; 0.02.
9397 750 15186
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 02 -- 28 June 2005
6 of 14
Philips Semiconductors
PBSS5160DS
60 V, 1 A PNP low VCEsat (BISS) transistor
600
(1)
006aaa474
-1.0 VBE (V) -0.8
(1)
006aaa476
hFE
400
(2) (2)
-0.6
200
(3)
(3)
-0.4
0 -10-1
-1
-10
-102
-103 -104 IC (mA)
-0.2 -10-1
-1
-10
-102
-103 -104 IC (mA)
VCE = -5 V (1) Tamb = 100 C (2) Tamb = 25 C (3) Tamb = -55 C
VCE = -5 V (1) Tamb = -55 C (2) Tamb = 25 C (3) Tamb = 100 C
Fig 5. DC current gain as a function of collector current; typical values
-1
006aaa489
Fig 6. Base-emitter voltage as a function of collector current; typical values
-1
006aaa490
VCEsat (mV)
VCEsat (V)
-10-1
-10-1
(1) (1) (2) (3) (2)
(3)
-10-2 -10-1
-1
-10
-102
-103 -104 IC (mA)
-10-2 -10-1
-1
-10
-102
-103 -104 IC (mA)
IC/IB = 20 (1) Tamb = 100 C (2) Tamb = 25 C (3) Tamb = -55 C
Tamb = 25 C (1) IC/IB = 100 (2) IC/IB = 50 (3) IC/IB = 10
Fig 7. Collector-emitter saturation voltage as a function of collector current; typical values
Fig 8. Collector-emitter saturation voltage as a function of collector current; typical values
9397 750 15186
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 02 -- 28 June 2005
7 of 14
Philips Semiconductors
PBSS5160DS
60 V, 1 A PNP low VCEsat (BISS) transistor
-1.1 VBEsat (V) -0.9
(1)
006aaa477
103 RCEsat () 102
006aaa491
-0.7
(2)
10 -0.5
(3) (1) (2) (3)
-0.3
1
-0.1 -10-1
-1
-10
-102
-103 -104 IC (mA)
10-1 -10-1
-1
-10
-102
-103 -104 IC (mA)
IC/IB = 20 (1) Tamb = -55 C (2) Tamb = 25 C (3) Tamb = 100 C
IC/IB = 20 (1) Tamb = 100 C (2) Tamb = 25 C (3) Tamb = -55 C
Fig 9. Base-emitter saturation voltage as a function of collector current; typical values
-2.0 IC (A) -1.6
006aaa478
Fig 10. Collector-emitter saturation resistance as a function of collector current; typical values
103 RCEsat ()
006aaa492
IB (mA) = -35.0 -31.5 -28.0 -24.5 -21.0
-17.5 -14.0 -10.5 -7.0
102
-1.2
10 -0.8
(1)
-3.5
(2)
-0.4
1
(3)
0.0 0
-1
-2
-3
-4 -5 VCE (V)
10-1 -10-1
-1
-10
-102
-103 -104 IC (mA)
Tamb = 25 C
Tamb = 25 C (1) IC/IB = 100 (2) IC/IB = 50 (3) IC/IB = 10
Fig 11. Collector current as a function of collector-emitter voltage; typical values
Fig 12. Collector-emitter saturation resistance as a function of collector current; typical values
9397 750 15186
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 02 -- 28 June 2005
8 of 14
Philips Semiconductors
PBSS5160DS
60 V, 1 A PNP low VCEsat (BISS) transistor
8. Test information
-I B
90 % input pulse (idealized waveform)
-I Bon (100 %)
10 %
-I Boff
-I C
90 %
output pulse (idealized waveform)
-I C (100 %)
10 % t td t on tr ts t off tf
006aaa266
Fig 13. BISS transistor switching time definition
VBB VCC
RB (probe) oscilloscope 450 VI R1 R2
RC Vo (probe) 450 DUT oscilloscope
mgd624
IC = -0.5 A; IBon = -25 mA; IBoff = 25 mA; R1 = open; R2 = 100 ; RB = 300 ; RC = 20
Fig 14. Test circuit for switching times
9397 750 15186
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 02 -- 28 June 2005
9 of 14
Philips Semiconductors
PBSS5160DS
60 V, 1 A PNP low VCEsat (BISS) transistor
9. Package outline
3.1 2.7 6 5 4 0.6 0.2
1.1 0.9
3.0 2.5
1.7 1.3
pin 1 index
1 0.95 1.9 Dimensions in mm
2
3 0.40 0.25 0.26 0.10 04-11-08
Fig 15. Package outline SOT457 (SC-74)
10. Packing information
Table 8: Packing methods The indicated -xxx are the last three digits of the 12NC ordering code. [1] Type number PBSS5160DS Package SOT457 Description 4 mm pitch, 8 mm tape and reel; T1 4 mm pitch, 8 mm tape and reel; T2
[1] [2] [3] For further information and the availability of packing methods, see Section 17. T1: normal taping T2: reverse taping
[2] [3]
Packing quantity 3000 -115 -125 10000 -135 -165
9397 750 15186
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 02 -- 28 June 2005
10 of 14
Philips Semiconductors
PBSS5160DS
60 V, 1 A PNP low VCEsat (BISS) transistor
11. Soldering
3.45 1.95
solder lands 0.95 3.30 2.825 0.45 0.55 occupied area solder paste solder resist
1.60 1.70 3.10 3.20
msc422
Dimensions in mm
Fig 16. Reflow soldering footprint
5.30
solder lands solder resist 5.05 0.45 1.45 4.45 occupied area solder paste
MSC423
1.40 4.30
Dimensions in mm
Fig 17. Wave soldering footprint
9397 750 15186
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 02 -- 28 June 2005
11 of 14
Philips Semiconductors
PBSS5160DS
60 V, 1 A PNP low VCEsat (BISS) transistor
12. Revision history
Table 9: Revision history Release date 20050628 Data sheet status Product data sheet Change notice Doc. number 9397 750 15186 Supersedes PBSS5160DS_1 Document ID PBSS5160DS_2 Modifications:
* * * * * * *
Product status changed Table 7: Switching time parameters td, tr, ton, ts, tf and toff added Figure 13 "BISS transistor switching time definition": added Figure 14 "Test circuit for switching times": added Section 10 "Packing information": added Section 11 "Soldering": added Section 16 "Trademarks": added Objective data sheet 9397 750 12704 -
PBSS5160DS_1
20040716
9397 750 15186
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 02 -- 28 June 2005
12 of 14
Philips Semiconductors
PBSS5160DS
60 V, 1 A PNP low VCEsat (BISS) transistor
13. Data sheet status
Level I II Data sheet status [1] Objective data Preliminary data Product status [2] [3] Development Qualification Definition This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN).
III
Product data
Production
[1] [2] [3]
Please consult the most recently issued data sheet before initiating or completing a design. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
14. Definitions
Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.
16. Trademarks
Notice -- All referenced brands, product names, service names and trademarks are the property of their respective owners.
15. Disclaimers
Life support -- These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors
17. Contact information
For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com
9397 750 15186
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 02 -- 28 June 2005
13 of 14
Philips Semiconductors
PBSS5160DS
60 V, 1 A PNP low VCEsat (BISS) transistor
18. Contents
1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description. . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2 Thermal characteristics. . . . . . . . . . . . . . . . . . . 4 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Test information . . . . . . . . . . . . . . . . . . . . . . . . . 9 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 10 Packing information. . . . . . . . . . . . . . . . . . . . . 10 Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 12 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 13 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Contact information . . . . . . . . . . . . . . . . . . . . 13
(c) Koninklijke Philips Electronics N.V. 2005
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 28 June 2005 Document number: 9397 750 15186
Published in The Netherlands

▲Up To Search▲

Price & Availability of PBSS5160DS

	To Download PBSS5160DS Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .