View RGP10M_1181195.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

RGP10A THRU RGP10M
GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER
Reverse Voltage - 50 to 1000 Volts
* D
DO-204AL
Forward Current - 1.0 Ampere
FEATURES
P A T
1.0 (25.4) MIN. 0.107 (2.7) 0.080 (2.0) DIA.
0.205 (5.2) 0.160 (4.1)
1.0 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) DIA.
NOTE: Lead diameter is 0.026 (0.66)
0.023 (0.58)
for suffix "E" part numbers
Plastic package has Underwriters Laboratory Flammability Classification 94V-0 High temperature metallurgically bonded construction Glass passivated cavity-free junction Capable of meeting environmental standards of MIL-S-19500 For use in high frequency rectifier circuits Fast switching for high efficiency 1.0 Ampere operation at TA=55C with no thermal runaway Typical IR less than 0.1A High temperature soldering guaranteed: 350C/10 seconds 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension
E
N
T
E
Dimensions in inches and (millimeters)
*Glass-plastic encapsulation technique is covered by
Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306
(R)
MECHANICAL DATA
Case: JEDEC DO-204AL molded plastic over glass body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.012 ounce, 0.3 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25C ambient temperature unless otherwise specified.
SYMBOLS
RGP 10A
RGP 10B
RGP 10D
RGP 10G
RGP 10J
RGP 10K
RGP 10M
UNITS
Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=55C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 1.0A Maximum full load reverse current, full cycle average 0.375" (9.5mm) lead length TA=55C Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Typical thermal resistance (NOTE 3) Operating junction and storage temperature range TA=25C TA=150C
VRRM VRMS VDC I(AV) IFSM VF IR IR trr CJ RJA TJ, TSTG
50 35 50
100 70 100
200 140 200
400 280 400 1.0 30.0 1.3 100.0 5.0 200.0
600 420 600
800 560 800
1000 700 1000
Volts Volts Volts Amp Amps Volts A A
150 15.0 55.0 -65 to +175
250
500
ns pF C/W C
NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C.B. mounted
4/98
RATINGS AND CHARACTERISTIC CURVES RGP10A THRU RGP10M
FIG. 1 - FORWARD CURRENT DERATING CURVE AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT
1.0
FORWARD SURGE CURRENT, AMPERES
RESISTIVE OR INDUCTIVE LOAD
30
TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method)
0.75
20
0.5
10
0.25
0.375" (9.5mm) LEAD LENGTH
0 0 25 50 75 100 125 150 175
1
10
NUMBER OF CYCLES AT 60 HZ
100
AMBIENT TEMPERATURE, C FIG. 4 - TYPICAL REVERSE CHARACTERISTICS FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS
20 10
TJ=125C
10
INSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE CURRENT, MICROAMPERES
1
TJ=25C
1
TJ=75C
PULSE WIDTH=300s 1% DUTY CYCLE
0.1
0.1
TJ=25C
0.01 0.4
0.6
0.8
1.0
1.2
1.4
1.6 0.01 0 20 40 60 80 100
INSTANTANEOUS FORWARD VOLTAGE, VOLTS
PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE
100
TRANSIENT THERMAL IMPEDANCE (C/W)
TJ=25C f=1.0 MHZ Vsig=50mVp-p
FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE
JUNCTION CAPACITANCE pF
100
10
10
1
1
1
10
REVERSE VOLTAGE, VOLTS
100
0.1 0.01
0.1
1
10
100
t, PULSE DURATION, sec

▲Up To Search▲

Price & Availability of RGP10M

	To Download RGP10M Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .