![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Preliminary ============ CONTENTS ============ SNC739 16-bit Voice Processor 1. INTRODUCTION ..............................................................................................................................3 2. FEATURES.........................................................................................................................................3 3. PIN ASSIGNMENT ...........................................................................................................................4 4. ROM TABLE......................................................................................................................................6 5. RAM TABLE ......................................................................................................................................7 6. SYSTEM CLOCK ..............................................................................................................................8 6.1 CRYSTAL INPUT .................................................................................................................................8 6.2 ROSC INPUT ......................................................................................................................................8 7. I/O PORT ............................................................................................................................................9 8. TIMER/COUNTER .........................................................................................................................10 9. PUSH-PULL DAC............................................................................................................................11 10. REGULATOR ................................................................................................................................11 10. ABSOLUTE MAXIMUM RATINGS...........................................................................................12 11. ELECTRICAL CHARACTERISTICS ........................................................................................12 12. APPLICATION CIRCUIT............................................................................................................13 13. BONDING PAD..............................................................................................................................15 Ver. 1.6 1 March 7, 2007 Preliminary History Version 1.0 1.1 1.2 1.3 1.4 1.5 1.6 Release Date 06/31/2006 07/10/2006 01/22/2007 02/12/2007 02/27/2007 03/01/2007 03/07/2007 1. First release. 1. Modify Features. 1. Remove Current DAC Function. 1. Add Pin Location 2. Add Bonding Pad Map 1. Add Application Circuit 1. Add ROSC Application Circuit. 1. Modify application circuit error. 2. Add Regulator section. Descript SNC739 16-bit Voice Processor Ver. 1.6 2 March 7, 2007 Preliminary SNC739 16-bit Voice Processor 1. INTRODUCTION The SNC739 is a simply chip base on new DSP technology. SNC739 provide simply and easy control functions for system manufactory. SNC739 also is a high performance voice IC. That is built-in 64K word high speed ROM, and by different model to built-in 64K word, 192K words low speed ROM, the maximum program size is full ROM size include high-speed and low-speed ROM. The SNC739 have three timer, one real time clock and one watchdog timer and built-in a hi-performance software synthesizer to provide lot of voice effects, such as hi-decompression engine to support from 1.5Kbps ~ 32Kbps compression rate for speech and music, multi-channel voice synthesizer to provide 12-channel wave table melody. 2. FEATURES Power supply: 2.4V ~ 3.6V (for 2 batteries application) 3.6V ~ 5.1V (for 3 batteries application) Built-in a new 16-bit DSP core with 16 MIPS CPU performance Software-based voice/melody processing Rich Function Instruction Set System Clock - 16MHz crystal or R-C type oscillator for system clock I/O Ports: - 24 I/O pins (P0.0~P0.15, P1.0~P1.7) - P0.15 with IR carrier signal RAM size: 4K*16 bits ROM size: 256KW - High performance program ROM: 64K*16 bits - Low speed ROM: 192KW Maximum program size: Full ROM Size 3 Timer, 1 RTC, 1 WDT - Timer With Individual pre-scalar and auto-reload function - RTC with 0.25/0.5/1 sec period - Watchdog Timer 9 Interrupt Sources - 4 for Internal Timer (timer0, 1, 2 and RTC) - 4 for External (P0.0~P0.3) - 1 for DA (Push Pull DAC) Two voice channels / 12 melody channels Three 8-bit timer with auto-reload function Built in a 12-bit Push-Pull DAC output Internal regulator provided Ver. 1.6 3 March 7, 2007 Preliminary SNC739 16-bit Voice Processor Low Voltage Reset Low Voltage Detect Sampling Rate: 8KHz ~16KHz Built-in software voice synthesizer (multiple bit-rate solution 1.5Kbps, 1.72Kbps, 2Kbps, 2.4Kbps, 3Kbps, 4Kbps, 5Kbps, 6Kbps, 8Kbps, 16Kbps, 20Kbps, 24Kbps, 28Kbps, 32Kbps, 35Kbps @ 8K, 10K, 12K, 14K, 16K sampling rate) Built-in software melody synthesizer includes the dual-tone melody and 12-channel wave-table melody. 3. PIN ASSIGNMENT Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 Symbol Test VSSIO2 CVSS RST CKSEL VDDIO2 CVDD REGOUT VSSA XIN XOUT LXIN LXOUT VDDA P0.0 P0.1 P0.2 P0.3 VSSIO0 P0.4 P0.5 P0.6 P0.7 VDDIO0 P0.8 P0.9 P0.10 P0.11 VSSIO0 I/O I I I I I I I O I I O I O I I/O I/O I/O I/O I I/O I/O I/O I/O I I/O I/O I/O I/O I Descriptions Test Pin for testing using Negative power supply Negative power supply for core circuit Chip reset Crystal/RC-type oscillator select for high speed clock Positive power supply Positive power supply for core circuit Regulator voltage output Negative power supply High speed clock crystal input High speed clock crystal output Low speed clock crystal input Low speed clock crystal output Positive power supply I/O Port 0 I/O Port 0 I/O Port 0 I/O Port 0 Negative power supply I/O Port 0 I/O Port 0 I/O Port 0 I/O Port 0 Positive power supply I/O Port 0 I/O Port 0 I/O Port 0 I/O Port 0 Negative power supply Ver. 1.6 4 March 7, 2007 Preliminary SNC739 16-bit Voice Processor Pin No. 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 Symbol P0.12 P0.13 P0.14 P0.15 P1.0 P1.1 P1.2 P1.3 VDDIO1 P1.4 P1.5 P1.6 P1.7 VSSIO1 VSSPP BP0 VDDPP BN0 VSSPP I/O I/O I/O I/O I/O I/O I/O I/O I/O I I/O I/O I/O I/O I I O I O I I/O Port 0 I/O Port 0 I/O Port 0 I/O Port 0 I/O Port 1 I/O Port 1 I/O Port 1 I/O Port 1 Descriptions Positive power supply I/O Port 1 I/O Port 1 I/O Port 1 I/O Port 1 Negative power supply Negative power supply Push Pull output 1 Positive power supply Push Pull output 2 Negative power supply Ver. 1.6 5 March 7, 2007 Preliminary SNC739 16-bit Voice Processor 4. ROM TABLE The total ROM size is 256K words. It split two parts including high speed and low speed ROM area, but user also can program all area. In high speed ROM had a small OS to control all function flow. We recommend user put you program in high speed ROM and put data in low speed ROM to get high performance. 0x000000 High Speed ROM (64K W ords) 0x00FFFF 0x010000 0x03FFFF Ver. 1.6 ~ Total ROM Size 256K Words Low Speed ROM (192K W ords) 6 March 7, 2007 Preliminary SNC739 16-bit Voice Processor 5. RAM TABLE Total RAM size is 4K words, and each one bank is 256 words. The RAM size 0~3K words is for algorithm using and last 1K words is for user using. 0x00A 000 0x00A 0FF 0x00A 100 B ank 0 B ank 1 B ank 2 B ank 3 B ank 4 B ank 5 B ank 6 B ank 7 B ank 8 B ank 9 B ank 10 R eserve for O S and V oice A lgorithm use 0x00A B FF 0x00A C 00 B ank 11 B ank 12 B ank 13 B ank 14 B ank 15 0x00A FFF Ver. 1.6 ~ Free for U ser 7 March 7, 2007 Preliminary SNC739 16-bit Voice Processor 6. System Clock The system clock had dual source high clock and low clock input, user can selected from 16Mhz crystal or ROSC for high clock and 32768 crystal for low clock. In Normal mode, user can select high clock source from 16Mhz crystal or ROSC, In Slow mode, user must select 32768 crystal to input system clock. 6.1 Crystal Input GND CKSEL High Clock Low Clock 6.2 ROSC Input User uses ROSC mode to make High clock. The internal clock is reference clock from 32768 X'tal to fine tune to 16MHz. So, when ROSC mode is select, the 32768 X'tal must provide reference clock to system. VDD CKSEL C7 LXIN NC XIN 15 PF C8 Y2 32768 LXOUT 15 PF NC XOUT HIGH Clock LOW Clock Ver. 1.6 8 March 7, 2007 Preliminary SNC739 16-bit Voice Processor 7. I/O PORT SNC739 provides one a 24-bit I/O port for user application (P0.0~P0.15, P1.0~P1.7). The input pull high resistor of each pin can be programmed by Port Pull-High register. The direction of I/O port is selected by Port Direction register. The Port0 (P0.0~P0.15) and Port1 (P1.0~P1.7) can wake the chip up from the stop mode and watch mode. P0.15 can be modulated with a 38.5Khz carry signal to realize IR signal transmission. When user uses GPIO to wake up chip, the GPIO must setting to input mode and Pull-High all I/O pin. Pull-Up Resister Pull-Up Select In/Out Control PAD Latch to internal bus In/Out Control I/O Configuration of P0.0~P0.15 Ver. 1.6 9 March 7, 2007 Preliminary SNC739 16-bit Voice Processor Pull-Up Resister Pull-U Select PAD Digital In Input Control Input Port Configuration of Port 1 (P1.0~P1.7) IREN P0.15 Overflow Timer2 2 P0.15 Modulated with a carry signal I/O Pad 8. TIMER/COUNTER SNC739 provides three 8-bit timer/event counters (T0/T1/T2). Each timer is 8-bit binary up-count timer with pre-scalar and auto-reload function. Timer 0 (T0) is used when voice playing, so user should avoid to use T0. (system clock)/2* /2 /4 /8 Enable TnC (8-bit) If equal, Time out MU 8-bit Up Counter comparator /256 Pre-scalar clear Auto-reload Ver. 1.6 10 March 7, 2007 Preliminary SNC739 16-bit Voice Processor 9. Push-Pull DAC To play out voices, SNC739 contains Push-Pull DAC (direct drive) for the users' applications. 10. Regulator The SNC739 provide a linear regulator for core power (CVDD). The accuracy output voltage is 2.8V0.2V and it can be power-downed by software. Features: Input supply voltage: 3.6V ~ 5.1V Dropout voltage of 0.8V at 20mA output current: Output current: 20mA Power down current: <1uA Accuracy output voltage: 2.6~2.8V Application circuit: STPMD ReguPD Power Down SNC7x9 3 1 VDD VDD(4.5V) C1 10uF ON/OFF VIN CVDD VOUT C2 104 VOUT_REG Regulator 2 Ver. 1.6 11 March 7, 2007 Preliminary SNC739 16-bit Voice Processor 10. ABSOLUTE MAXIMUM RATINGS Items Supply Voltage Input Voltage Operating Temperature Storage Temperature Symbol VDD-V VIN TOP TSTG Min -0.3 GND-0.3 0 -55.0 Max 6.0 VDD+0.3 55 125.0 Unit. V V o C o C 11. ELECTRICAL CHARACTERISTICS Item Operating Voltage Standby current Operating Current Watch mode Current Slow mode Current Pull-Up resistor of P0, P1 Input current of P0, P1 Drive current of P0, P1 Sink Current of P0, P1 Drive current of Buo1 Sink Current of Buo1 Drive Current of Buo2 Sink Current of Buo2 Oscillation Freq. (crystal) Sym. Min. Typ. Max. Unit Condition VDD 2.4 3.6 V VDD 3.6 5.1 V ISBY 2.0 uA VDD=3V, no load IOPR 10 mA VDD=3V, no load IWCH 12 uA VDD=3V,9instructions ISL 50 uA VDD=3.3V, no load RPU 800 K VDD=3V, no load IIH 10.0 uA VDD=3V,VIN=3V IOD 4 mA VDD=3V,VO=2.4V IOS 6 mA VDD=3V,VO=0.4V IOD 150 mA VDD=3V,Buo1=1.5V IOS 150 mA VDD=3V,Buo1=1.5V IOD IOS FOSC 150 150 16.0 mA VDD=3V,Buo2=1.5V mA VDD=3V,Buo2=1.5V MHz VDD=3V - Ver. 1.6 12 March 7, 2007 Preliminary SNC739 16-bit Voice Processor 12. Application Circuit X'TAL U1 VDD 46 C1 0.1u LS1 C2 47u/10V 48 44 45 47 Push-Pull 1 VDD R1 220K SW8 2 4 VCC 7 C8 C7 C9 47u/10V 0.1u 0.1u 3 8 5 VDD C13 0.1u 24 VDD 6 C5 47u/10V C6 0.1u 2 Test VDDIO2 VSSIO2 RST_ CVDD CVSS REGOUT CKSEL XIN VDDIO0 XOUT LXIN 11 12 VDDPP VDDIO1 VSSPP VSSPP BP0 BN0 VSSIO1 P1.7 P1.6 VDD 38 43 42 41 40 39 37 36 35 34 14 9 10 C10 47u/10V XIN Y1 TXC 16M XOUT LXIN Y2 32768 LXOUT 13 LXOUT 20pF C17 20pF C15 C16 20pF C11 0.1u 1 SW1 1 SW2 1 SW3 1 SW4 1 SW5 1 SW6 1 SW7 1 SW9 VDD VDDA VSSA 2 2 2 2 2 2 2 2 1 2 C3 47u/10V 2 C4 0.1u VDD 1 1.5V BT1 VCC SNC729 real chip SNC739 real chip SNC759 Real Chip P1.5 P1.4 P1.3 P1.2 P1.1 P1.0 BT2 3V 1 C12 20pF C14 47u/10V 19 29 VSSIO0 VSSIO0 15 16 17 18 20 21 22 23 25 26 27 28 30 31 32 33 P0.0 P0.1 P0.2 P0.3 P0.4 P0.5 P0.6 P0.7 P0.8 P0.9 P0.10 P0.11 P0.12 P0.13 P0.14 P0.15 1 SW10 1 SW11 1 SW12 1 SW13 1 SW14 1 SW15 1 SW16 1 D1 SW17 D2 D3 D4 D5 D6 D7 D8 2 2 2 2 2 2 2 2 Ver. 1.6 13 March 7, 2007 Preliminary SNC739 16-bit Voice Processor ROSC U1 VDD 46 C1 0.1u LS1 C2 47u/10V 48 44 45 47 Push-Pull 1 VDD R1 220K SW8 2 4 VCC 7 C8 C7 C9 47u/10V 0.1u 0.1u 3 8 VDD 5 VDD C13 0.1u 24 VDD 6 C5 47u/10V C6 0.1u 2 Test VDDIO2 VSSIO2 RST_ CVDD CVSS REGOUT CKSEL XIN VDDIO0 XOUT LXIN 11 12 NC LXIN Y2 32768 LXOUT 13 LXOUT 20pF C17 C16 20pF VSSPP VSSPP BP0 BN0 VDDPP VDDIO1 VSSIO1 P1.7 P1.6 VDD 38 43 42 41 40 39 37 36 35 34 14 9 10 NC C10 47u/10V C11 0.1u 1 SW1 1 SW2 1 SW3 1 SW4 1 SW5 1 SW6 1 SW7 1 SW9 VDD VDDA VSSA 2 2 2 2 2 2 2 2 1 2 C3 47u/10V 2 C4 0.1u VDD 1 1.5V BT1 VCC SNC729 real chip SNC739 real chip SNC759 Real Chip P1.5 P1.4 P1.3 P1.2 P1.1 P1.0 BT2 3V 1 C14 47u/10V 19 29 VSSIO0 VSSIO0 15 16 17 18 20 21 22 23 25 26 27 28 30 31 32 33 P0.0 P0.1 P0.2 P0.3 P0.4 P0.5 P0.6 P0.7 P0.8 P0.9 P0.10 P0.11 P0.12 P0.13 P0.14 P0.15 1 SW10 1 SW11 1 SW12 1 SW13 1 SW14 1 SW15 1 SW16 1 D1SW17 D2 D3 D4 D5 D6 D7 D8 2 2 2 2 2 2 2 2 Note: The SNC739 total have 6 powers, each power use one 47uF and one 0.1uF capacitor. If user wants to save cost, you can use 0.1uF on each power and add 47uF on VDDPP and VDDA. 14 Ver. 1.6 March 7, 2007 Preliminary SNC739 16-bit Voice Processor 13. Bonding PAD Ver. 1.6 15 March 7, 2007 Preliminary SNC739 16-bit Voice Processor DISCLAIMER The information appearing in SONiX web pages ("this publication") is believed to be accurate. However, this publication could contain technical inaccuracies or typographical errors. The reader should not assume that this publication is error-free or that it will be suitable for any particular purpose. SONiX makes no warranty, express, statutory implied or by description in this publication or other documents which are referenced by or linked to this publication. In no event shall SONiX be liable for any special, incidental, indirect or consequential damages of any kind, or any damages whatsoever, including, without limitation, those resulting from loss of use, data or profits, whether or not advised of the possibility of damage, and on any theory of liability, arising out of or in connection with the use or performance of this publication or other documents which are referenced by or linked to this publication. This publication was developed for products offered in Taiwan. SONiX may not offer the products discussed in this document in other countries. Information is subject to change without notice. Please contact SONiX or its local representative for information on offerings available. Integrated circuits sold by SONiX are covered by the warranty and patent indemnification provisions stipulated in the terms of sale only. The application circuits illustrated in this document are for reference purposes only. SONIX DISCLAIMS ALL WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE. SONIX reserves the right to halt production or alter the specifications and prices, and discontinue marketing the Products listed at any time without notice. Accordingly, the reader is cautioned to verify that the data sheets and other information in this publication are current before placing orders. Products described herein are intended for use in normal commercial applications. Applications involving unusual environmental or reliability requirements, e.g. military equipment or medical life support equipment, are specifically not recommended without additional processing by SONIX for such application. Ver. 1.6 16 March 7, 2007 |
Price & Availability of SNC739
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |