 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DC/DC Converter TEN 30 Series Features High Power Density: 30W in a 50x40x10mm Package Industry Standard Footprint Very high Efficiency Models with low Output Voltages:1.8, 2.5, 3.3VDC Output Voltage adjustable Remote on/off Operating Ambient Temperature Range - 40C to +70C EMI-Filter to meet EN 55022A Six-side shielded Metal Case 2 Year Product Warranty 30 Watt The TEN 30 Series is a new high efficiency, isolated 30W converter in a shielded metalcase with excellent specification. The 12 models in this series feature 2:1 input range with 18-36 or 36-75VDC.Very high efficiency allows safe operating ambient temperatures from -40C to +70C.Overload and overvoltage protection, under voltage shutdown as well as remote on/off are standard features of this converter. Built-in EMI-filter to comply with EN 55022A minimizes the need for external filter circuits. Typical applications for the TEN30 series converter are communication and networking systems, industrial electronics and distributed power systems. Models Ordercode TEN 30-2408 TEN 30-2409 TEN 30-2410 TEN 30-2411 TEN 30-2412 TEN 30-4808 TEN 30-4809 TEN 30-4810 TEN 30-4811 TEN 30-4812 Input voltage range Output voltage 1.8VDC 2.5VDC 3.3VDC 5 VDC 12 VDC 1.8VDC 2.5 VDC 3.3VDC 5 VDC 12 VDC Output current max. 6`000 6'000 6'000 6'000 2'500 6`000 6'000 6'000 6'000 2'500 mA mA mA mA mA mA mA mA mA mA Efficiency typ. 82 84 86 88 89 83 85 87 89 90 % % % % % % % % % % 18 - 36 VDC 36 - 75 VDC www.tracopower.com Page 1 DC/DC Converter TEN 30 Series 30 Watt Input Specifications Input current (no load) Input current (full load) 24 Vin; 24 Vin; 24 Vin; 24 Vin; 48 Vin; 48 Vin; 48 Vin; 48 Vin; 24 Vin models: 48 Vin models: 1.8 Vout models: 2.5 Vout models: 3.3 Vout models: other output models: 1.8 Vout models: 2.5 Vout models: 3.3 Vout models: other output models: 24 Vin models: 48 Vin models: 24 Vin models: 48 Vin models: 50 mA typ. 40 mA typ. 740 mA typ. 980 mA typ. 1300 mA typ. 1900 mA typ. 370 mA typ. 490 mA typ. 640 mA typ. 940 mA typ. 17.8 VDC / 15.8 VDC 36 VDC / 33 VDC 50 V max. 100 V max. EN 55022 level A, FCC part 15, level A Start-up voltage / under voltage shut down Surge voltage (100 msec. max.) Conducted noise ( Input )ecifications Output Specifications Voltage set accuracy Output voltage adjustment Regulation - Input variation Vin min. to Vin max. - Load variation 10 - 100 % 12 Vout models: all other models: 1% 10 % 0.2 % max. 0.5 % max. 75 mVpk-pk max. 50 mVpk-pk max. 0.02 % / C 110% - 140% Iout max., foldback Hiccup mode, indefinite (automatic recovery) 1.8 Vout models / 2.5 Vout models: 3.3 Vout models / 5 Vout models: 12 Vout models : 65'000 F max. / 33'000 F max. 19'500 F max. / 10'200 F max. 3'300 F max. Ripple and noise (20 MHz Bandwidth) Temperature coefficient Output current limitation Short circuit protection Capacitive load General Specifications Temperature ranges - Operating - Case temperature - Storage - 40 C ... + 71 C + 100 C max. - 55 C ... + 125 C 2.6 %/C above 60C 95 % rel H max. > 290'000 h @ + 25 C 1`500 VDC 500 pF typ > 1'000 Mohm Derating Humidity (non condensing) Reliability, calculated MTBF (MIL-HDBK-217 E) Isolation voltage Isolation capacity Isolation resistance Input/Output Input/Output Input/Output All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. www.tracopower.com Page 2 DC/DC Converter TEN 30 Series 30 Watt General Specifications Remote on/off ON: OFF: OFF idle current: 3.5 ... 12 VDC or open circuit. 0 ... 1.2 VDC or short circuit pin 4 and pin 2 2.5 mA max. 300 kHz typ. (Pulse width modulation PWM) UL 1950, EN 60950, IEC 60950 Compliance up to 60 VDC input voltage(SELV limit) UL /cUL File E188913 Copper nickel plated Plastic Epoxy (flammability to UL 94V-0) 48 g (1.69 oz) max. 260 C / 10 sec. Switching frequency (fixed) Safety standards Savety approvals Physical Specifications Case material Baseplate Potting material Weight Soldering temperature Output Voltage Adjustment +Vout CW Trim 100K Pot. CCW -Vout All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. www.tracopower.com Page 3 DC/DC Converter TEN 30 Series 30 Watt Outline Dimensions mm (inches) 4 x 5.08 10.16 10.16 10.16 (0.4) 8 7 6 5 Bottom view 40.6 (0.4) (0.4) 4 3 2 1 (1.6) 17.8 5.08 (0.2) 45.72 (1.8) 5.610.16 (0.22) (0.4) 50.8 (2.0) Pin diameter o 1.0 0.05 (0.039 0.002) Pin-Out Pin 1 2 3 4 5 6 7 8 +Vin (Vcc) -Vin (GND) No pin Remote on/off No pin +Vout -Vout Trim Specifications can be changed without notice Rev. 11/02 Jenatschstrasse 1 * CH-8002 Zurich * Switzerland Tel. +41-1284 2911 * Fax +41-1201 1168 * e-mail: sales@traco.ch * internet: http://www.tracopower.com (0.7) (4 x 0.2) Page 4 |
Price & Availability of TEN30
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |