 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Bulletin PD-20590 rev. B 11/04 1N5818 1N5819 SCHOTTKY RECTIFIER 1.0 Amp Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM IFSM @ tp = 5 s sine VF TJ @ 1 Apk, T J = 25C range Description/Features Units A V A V C The 1N5818/ 1N5819 axial leaded Schottky rectifier has been optimized for very low forward voltage drop, with moderate leakage. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. Low profile, axial leaded outline High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Very low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Lead-Free plating Values 1.0 30/40 225 0.55 - 40 to 150 CASE STYLE AND DIMENSIONS Device Marking: 1N581X Conform to JEDEC Outline DO-204AL (DO-41) Dimensions in millimeters and inches www.irf.com 1 1N5818, 1N5819 Bulletin PD-20590 rev. B 11/04 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 1N5818 30 1N5819 40 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current * See Fig. 4 IFSM Max. Peak One Cycle Non-Repetitive Surge Current * See Fig. 6 225 35 A 5s Sine or 3s Rect. pulse Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated V RRM applied Value 1.0 Units A Conditions 50% duty cycle @ TL =90 C, rectangular wave form Electrical Specifications Parameters VFM Max. Forward Voltage Drop * See Fig. 1 (1) 1N5818 1N5819 Units 0.55 0.71 0.875 0.5 0.61 0.77 0.6 0.73 0.9 0.55 0.63 0.79 1.0 6.0 12 V V V V V V mA mA mA pF nH V/s Conditions @ 1A @ 2A @ 3A @ 1A @ 2A @ 3A T J = 25C T J = 100C T J = 125C V R = 5VDC (test signal range 100 to 1Mhz) 25C Measured lead to lead 5mm from pack. body VR = rated VR TJ = 125 C TJ = 25 C IRM Max. Reverse Leakage Current * See Fig. 2 (1) CT LS Max. Junction Capacitance Typical Series Inductance 60 8.0 10000 dv/dt Max. Voltage Rate of Change (Rated VR) (1) Pulse Width < 300s, Duty Cycle < 2% Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range Value -40 to 150 -40 to 150 80 Units C C Conditions RthJL Max. Thermal Resistance Junction to Lead (2) wt Approximate Weight Case Style C/W DC operation (* See Fig. 4) 0.33(0.012) g (oz.) DO-204AL(DO-41) (2) Mounted 1 inch square PCB, thermal probe connected to lead 2mm from package 2 www.irf.com 1N5818, 1N5819 Bulletin PD-20590 rev. B 11/04 100 Reverse Current - I R (mA) 10 10 1 T J = 150C 125C 0.1 0.01 25C Instantaneous Forward Current - I F (A) 0.001 0.0001 0 10 20 30 40 Reverse Voltage - V R (V) 1 Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage 100 Tj = 150C Tj = 125C Tj = 25C Junction Capacitance - C T (pF) T = 25C J 0.1 0 0.2 0.4 0.6 0.8 1 1.2 Forward Voltage Drop - VFM (V) Fig. 1 - Typ. Forward Voltage Drop Characteristics 10 0 10 20 30 40 50 Reverse Voltage - V R (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage www.irf.com 3 1N5818, 1N5819 Bulletin PD-20590 rev. B 11/04 Allowable Lead Temperature (C) 160 140 120 100 80 Square wave (D = 0.50) Rated Vr applied 0.8 Average Power Loss (Watts) DC 0.6 RMS Limit 0.4 0.2 60 see note (3) 40 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 Average Forward Current - I F(AV) (A) Fig. 4 - Typ. Allowable Lead Temperature Vs. Average Forward Current D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 DC DC 0 0 0.5 1 1.5 Average Forward Current - I F(AV) (A) Fig. 5- Forward Power Loss Characteristics Non-Repetitive Surge Current - I (A) FSM 1000 At Any Rated Load Condition And With Rated VRRM Applied Following Surge 100 10 10 100 1000 10000 Square Wave Pulse Duration - tp (microsec) Fig. 6 - Typ . Non-Repetitive Surge Current (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x V FM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR 4 www.irf.com 1N5818, 1N5819 Bulletin PD-20590 rev. B 11/04 Ordering Information Table Device Code 1N5819 1 TR 2 1N5818 = 1A, 30V 1 2 - Part Number TR= Tape & Reel package (5000 pcs) = Box package (1000 pcs) 1N5819 = 1A, 40V Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 11/04 www.irf.com 5 |
Price & Availability of 1N5819TR
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |