|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
1SS356 Diodes Band switching diode 1SS356 Applications High frequency switching External dimensions (Unit : mm) 1.250.1 0.10.1 0.05 Land size figure (Unit : mm) 0.9MIN. 1.70.1 2.50.2 Features 1) Small mold type. (UMD2) 2) High reliability. 0.8MIN. UMD2 Construction Silicon epitaxial planar 0.30.05 0 .70.2 0.1 Structure ROHM : UMD2 JEDEC : S0D-323 JEITA : SC-90/A dot (year week factory) Taping specifications (Unit : mm) 4.00.1 2.00.05 1.550.05 1.750.1 0.30.1 3.50.05 8.00.2 1.400.1 4.00.1 1.05 1.00.1 Absolute maximum ratings (Ta=25C) Param eter Forward current (DC) Revers e voltage (DC) J unction tem perature S torage tem perature Sym bol IF VR Tj Ts tg Lim its 100 35 125 -55 to 125 Electrical characteristics (Ta=25C) Parameter Symbol VF Forward voltage IR Reverse current Capacitance between terminals Ct Forward operating resistance rf 2.75 Unit mA V Min. - Typ. - Max. 1.0 10 1.2 0.9 Unit V nA pF Conditions IF=10mA VR=25V VR=6V , f=1MHz IF=2mA , f=100MHz Rev.B 2.80.1 2.1 1/3 1SS356 Diodes Electrical characteristics curves (Ta=25C) 100 Ta=75 FORWARD CURRENT:IF(mA) 10 REVERSE CURRENT:IR(nA) Ta=125 1 Ta=-25 0.1 Ta=25 1 Ta=75 CAPACITANCE BETWEEN TERMINALS:Ct(pF) 10 Ta=125 10 f=1MHz 0.1 Ta=25 0.01 Ta=-25 1 0.01 0.001 0.001 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 FORWARD VOLTAGEVF(mV) VF-IF CHARACTERISTICS 1 1.1 1.2 0.0001 0 10 20 30 40 REVERSE VOLTAGEVR(V) VR-IR CHARACTERISTICS 50 0.1 0 5 10 15 20 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 25 30 10 f=100MHz FORWARD VOLTAGE:VF(mV) 850 Ta=25 IF=10mA n=30pcs 0.1 0.09 0.08 REVERSE CURRENT:IR(nA) 0.07 0.06 0.05 0.04 0.03 0.02 0.01 AVE:0.0116nA Ta=25 VR=25V n=30pcs 840 FORWARD OPERATING RESISTANCE:rf() 830 1 820 AVE:0.833V 810 0.1 0.01 0.1 1 FORWARD CURRENT:IF(mA) rf-IF CHARACTERISTICS 10 800 VF DISPERSION MAP 0 IR DISPERSION MAP 1 0.9 0.8 CAPACITANCE BETWEEN TERMINALS:Ct(pF) 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 Ct DISPERSION MAP AVE:0.807pF Ta=25 VR=6V f=1MHz n=10pcs 20 5 Ifsm 1cyc Ta=25 VR=6V IF=10mA RL=100 Irr=0.1*IR n=10pcs RESERVE RECOVERY TIME:trr(ns) PEAK SURGE FORWARD CURRENT:IFSM(A) 4 15 8.3ms 3 10 2 5 1 AVE:1.20ns 0 AVE:5.60A 0 IFSM DISRESION MAP trr DISPERSION MAP 1 0.9 0.8 FORWARD OPERATING RESISTANCE:rf() Ta=25 f=100MHz IF=2mA n=10pcs 10 9 PEAK SURGE FORWARD CURRENT:IFSM(A) PEAK SURGE FORWARD CURRENT:IFSM(A) 8 7 6 5 4 3 2 1 0 1 Ifsm 8.3ms 8.3ms 100 Ifsm t 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 AVE:0.602 1cyc 10 1 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 100 0.1 1 10 TIME:t(ms) IFSM-t CHARACTERISTICS 100 FORWARD CURRENT:IF(mA) rf DISPERSION MAP Rev.B 2/3 1SS356 Diodes 1000 Rth(j-a) TRANSIENT THAERMAL IMPEDANCE:Rth (/W) 10 9 8 ELECTROSTATIC DISCHARGE TEST ESD(KV) 100 7 6 5 4 3 2 1 0 10 TIME:t(s) Rth-t CHARACTERISTICS 0.1 1000 C=200pF R=0 C=100pF R=1.5k AVE:0.88kV AVE:6.63kV Rth(j-c) Mounted on epoxy board 10 IM=10mA IF=100mA 1ms time 300us 1 0.001 ESD DISPERSION MAP Rev.B 3/3 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1 |
Price & Availability of 1SS356 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |