 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 2SA2090 Transistors Medium power transistor (-60V, -0.5A) 2SA2090 Features 1) High speed switching. (Tf : Typ. : 35ns at IC = 500mA) 2) Low saturation voltage, typically. (Typ. : -150mV at IC = -100mA, IB = -10mA) 3) Strong discharge power for inductive load and capacitance load. 4) Complements the 2SC5868. Dimensions (Unit : mm) TSMT3 0.95 0.95 (1) 2.8 1.6 1.9 0.4 (3) (2) 2.9 1.0MAX 0.85 0.16 Applications High speed switching, Low noise (1) Base (2) Emitter (3) Collector 0.3 ~ 0.6 0 ~ 0.1 Each lead has same dimensioins Abbreviated symbol : VM Structure NPN Silicon epitaxial planar Packaging Specifications Package Type Code Basic ordering unit (pieces) 2SA2090 Taping TL 3000 Absolute maximum ratings (Ta=25C) Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Power dissipation Junction temperature Storage temperature 1 Pw=10ms 2 Each terminal mounted on a recommended land. Symbol VCBO VCEO VEBO IC ICP PC Tj Tstg Limits -60 -60 -6 -0.5 -1.0 500 150 -55 to +150 Unit V V V A A mW C C 1 2 0.7 1/3 2SA2090 Transistors Electrical characteristics (Ta=25C) Parameter Collector-emitter breakdown voltage Collector-base breakdown voltage Emitter-base breakdown voltage Collector cut-off current Emitter cut-off current Collector-emitter saturation voltage DC current gain Transition frequency Collector output capacitance Turn-on time Storage time Fall time 1 Measured using pulse current Symbol BVCEO BVCBO BVEBO ICBO IEBO VCE(sat) hFE fT Min. -60 -60 -6 - - - 120 - - - - - Typ. - - - - - -150 - 400 10 35 100 60 Max. - - - -1.0 -1.0 -300 270 - - - - - Unit V V V A A mV - MHz pF ns ns ns IC= -1mA Conditions IC= -100mA IE= -100A VCB= -60V VEB= -4V IC= -100mA, IB= -10mA VCE= -2V, IC= -50mA VCE= -10V, IE=100mA, f=10MHz VCB= -10V, IE=0mA, f=1MHz IC= -500mA, IB1= -50mA IB2=50mA VCC -25V - 1 Cob Ton Tstg Tf 1 hFE RANK Q 120-270 Electrical characteristic curves 100 IB=450A 400A 10 1000 COLLECTOR CURRENT : IC (mA) 80 300A 60 250A 200A 40 150A 100A 20 50A 0 0 1 2 3 4 0A 5 COLLECTOR CURRENT : IC (A) 350A 10ms 1ms 1 Ta=25C VCC=25V 100ms 0.1 SWITCHING TIME (ns) 500s Tstg 100 Tf Ton DC 0.01 Single non repoetitive pulse 0.001 0.1 1 10 100 10 0.01 0.1 1 COLLECTOR TO EMITTER VOLTAGE : VCE (V) COLLECTOR TO EMITTER VOLTAGE : VCE (V) COLLECTOR CURRENT : IC (A) Fig.1 Typical output characteristics Fig.2 Safe operating area Fig.3 Switching Time 1000 VCE=2V 1000 Ta=25C 10 IC/IB=10/1 DC CURRENT GAIN : hFE VCE=5V VCE=2V 100 COLLECTOR SATURATION VOLTAGE : VCE(sat)(V) Ta=100C DC CURRENT GAIN : hFE 1 100 Ta=-40C Ta=25C VCE=3V 125C 0.1 25C -40C 10 0.001 10 0.01 0.1 1 0.001 0.01 0.1 1 0.01 0.001 0.01 0.1 1 COLLECTOR CURRENT : IC (A) COLLECTOR CURRENT : IC (A) COLLECTOR CURRENT : IC (A) Fig.4 DC current gain vs. collector current ( ) Fig.5 DC current gain vs. collector current () Fig.6 Collector-emitter saturation voltage vs. collector current ( ) 2/3 2SA2090 Transistors 10 10 1 -40C IC/IB=100/1 0.1 1 TRANSITION FREQUENCY : FT (MHz) Ta=25C IC/IB=10/1 1000 Ta=25C VCE=10V COLLECTOR SATURATION VOLTAGE : VCE (sat)(V) BASE EMITTER SATURATION VOLTAGE : VBE(sat) (V) 100 25C 125C IC/IB=20/1 IC/IB=10/1 0.01 0.1 1 0.01 0.001 0.1 0.001 0.01 0.1 1 10 0.001 0.01 0.1 1 10 COLLECTOR CURRENT : IC (A) COLLECTOR CURRENT : IC (A) EMITTER CURRENT : IE (A) Fig.7 Collector-emitter saturation voltage vs. collector current () Fig.8 Base-emitter saturation voltage vs. collector current Fig.9 Transition frequency COLLECTOR OUTPUT CAPACITANCE : COB (pF) 100 Ta=25C f=1MHz 1 VCE=2V COLLECTOR CURRENT : IC (A) 125C 0.1 10 25C -40C 0.01 1 0.1 1 10 100 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 BASE TO COLLECTOR VOLTAGE : VCB (V) BASE TO EMITTER VOLTAGE : VBE (V) Fig.10 Collector output capacitance Fig.11 Ground emitter propagation characteristics Switching characteristics measurement circuit RL=50 VIN IB1 IC VCC 25V IB2 PW PW 50 S Duty cycle 1% IB1 Base current waveform 90% Collector current waveform Ton IC 10% Tstg Tf IB2 3/3 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1 |
Price & Availability of 2SA2090
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |