![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Bulletin PD-20489 rev. A 02/03 60CTTN015 TRENCH SCHOTTKY RECTIFIER 60 Amp Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform PerDevice VRRM IFSM VF TJ @ tp = 5 s sine @ 30 Apk, TJ = 125C (typical) per leg range Description/ Features Units A V A V This center tap Schottky rectifier has been optimized for low forward voltage drop. The proprietary sub-micron technology allows for low power loss both in forward and reverse conduction. 150 C TJ operation Center tap configuration Low forward voltage drop High frequency operation High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Values 60 15 1800 0.3 -55 to150 C Case Styles 60CTTN015 Base Common Cathode 2 1 Anode 2 Common Cathode 3 Anode TO-220 www.irf.com 1 60CTTN015 Bulletin PD-20489 rev. A 02/03 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) @ TJ = 150C 60CTTN015 15 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward (Per Leg) Current (Per Device) IFSM Max. Peak One Cycle Non-Repetitive Surge Current (Per Leg) EAS IAR Non-Repetitive Avalanche Energy (Per Leg) Repetitive Avalanche Current (Per Leg) Values Units 30 60 1800 340 9.0 2 A Conditions 50% duty cycle @ TC = 130C, rectangular wave form Following any rated 5s Sine or 3s Rect. pulse load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied TJ = 25 C, IAS = 2 Amps, L = 4.5 mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical A mJ A Electrical Specifications Parameters VFM Max. Forward Voltage Drop (Per Leg) (1) Typ 0.41 0.48 0.33 0.44 0.30 0.42 Max 0.44 0.53 0.36 0.47 0.32 0.45 2 50 250 10000 Units V V V V V V mA mA mA pF nH Conditions @ 30A @ 60A @ 30A @ 60A @ 30A @ 60A TJ = 25 C TJ = 100C TJ = 125 C VR = rated VR VR = 5V VR = rated VR TJ = 150C TJ = 125C TJ = 25C IRM Max. Reverse Leakage Current (Per Leg) (1) 0.4 31 120 3000 8.0 - CT LS Junction Capacitance (Per Leg) Series Inductance (Per Leg) VR =10VDC(test signal range100KHz to1MHz) 25C Measured lead to lead 5mm from package body dv/dt Max. Voltage Rate of Change (1) Pulse Width < 300s, Duty Cycle < 2% V/s (Rated VR) Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range Values Units -55 to 150 -55 to 150 1.2 0.5 2 (0.07) 6 (5) 12 (10) C C C/W C/W g (oz.) Kg-cm (Ibf-in) Conditions RthJC Max. Thermal Resistance Junction to Case (Per Leg) RthCS Typical Thermal Resistance, Case to Heatsink wt Approximate Weight T MountingTorque Case Style Min. Max. DC operation Mounting surface , smooth and greased TO-220AB 2 www.irf.com 60CTTN015 Bulletin PD-20489 rev. A 02/03 1000 1000 Tj = 150C Reverse Current - I R (mA) 125C 100 100C 10 75C 50C Instantaneous Forward Current - I F (A) 100 1 25C 0.1 0 T = 150C J T = 125C J T = 25C J 2 4 6 8 10 12 14 16 Reverse Voltage - VR (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) 10000 T = 25C Junction Capacitance - C T (p F) J 10 1 0 0.4 0.8 1.2 1.6 2 Forward Voltage Drop - VFM (V) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) 1000 4 6 8 10 12 14 16 Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) 10 (C/W) thJC Thermal Impedance Z 1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 Single Pulse (Thermal Resistance) Notes: PDM t1 t2 0.1 1. Duty factor D = t1 / t2 2. Peak Tj = Pdm x ZthJC + Tc 0.01 0.00001 0.0001 0.001 0.01 0.1 1 10 100 t1, Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) www.irf.com 3 60CTTN015 Bulletin PD-20489 rev. A 02/03 155 Allowable Case Temperature (C) Average Power Loss (Watts) 18 16 14 12 10 8 6 4 2 0 0 150 145 140 135 130 Square wave (D = 0.50) 125 80% Vr applied see note (2) 120 0 5 10 15 20 25 30 35 40 45 Average Forward Current - I F(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg) Non-Repetitive Surge Current - I FSM (A) D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 RMS Limit DC DC 5 10 15 20 25 30 35 40 45 Average Forward Current - IF(AV) (A) Fig. 6 - Forward Power Loss Characteristics (Per Leg) 10000 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge 1000 100 10 100 1000 10000 Square Wave Pulse Duration - tp (microsec) Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) L HIGH-S PEED S CH WIT FREE-WHEEL DIODE 40HF L40S 02 Vd = 25 Volt DUT IR FP460 R = 25 ohm g + CURR ENT MONIT OR Fig. 8 - Unclamped Inductive Test Circuit (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ 80% VR applied 4 www.irf.com 60CTTN015 Bulletin PD-20489 rev. A 02/03 Outline Table 10.54 (0.41) MAX. 3.78 (0.15) 3.54 (0.14) 15.24 (0.60) 14.84 (0.58) 123 14.09 (0.55) 13.47 (0.53) 3.96 (0.16) 3.55 (0.14) 2.04 (0.080) MAX. 1.40 (0.05) 1.15 (0.04) 0.94 (0.04) 0.69 (0.03) 2.89 (0.11) 2.64 (0.10) Base Common Cathode 2 1.32 (0.05) DIA. 6.48 (0.25) 6.23 (0.24) 2 1.22 (0.05) 2.92 (0.11) 2.54 (0.10) TERM 2 0.10 (0.004) 123 4.57 (0.18) 4.32 (0.17) 0.61 (0.02) MAX. 5.08 (0.20) REF. 1 Anode 2 Common Cathode 3 Anode Conform to JEDEC outline TO-220AB Dimensions in millimeters and (inches) Data and specifications subject to change without notice. This product has been designed for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 02/03 www.irf.com 5 |
Price & Availability of 60CTTN015
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |