 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 4.0x3.0mm RIGHT ANGLE SMD CHIP LED LAMP APEKA4030SEC SUPER BRIGHT ORANGE Features 4.0mmx3.0mm RIGHT ANGLE SMT LED, 2.65mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. PACKAGE :500PCS / REEL. RoHS COMPLIANT. Description The Super Bright Orange device is made with DH InGaAlP (on GaAs substrate) light emitting diode chip. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD1185 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: JUN/30/2005 DRAWN: H.Q.YUAN PAGE: 1 OF 5 ERP:1204000423 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. APEKA4030SEC SUPER BRIGHT ORANGE (InGaAlP) WATER CLEAR 110 Typ. 320 Viewing Angle 21/2 90 Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25C Symbol peak D 1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Orange Super Bright Orange Super Bright Orange Super Bright Orange Super Bright Orange Super Bright Orange Typ. 610 601 29 30 2.0 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR= 5V Absolute Maximum Ratings at TA=25C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Super Bright Orange 75 30 195 5 -40C To +85C Units mW mA mA V SPEC NO: DSAD1185 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: JUN/30/2005 DRAWN: H.Q.YUAN PAGE: 2 OF 5 ERP:1204000423 Super Bright Orange APEKA4030SEC SPEC NO: DSAD1185 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: JUN/30/2005 DRAWN: H.Q.YUAN PAGE: 3 OF 5 ERP:1204000423 APEKA4030SEC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAD1185 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: JUN/30/2005 DRAWN: H.Q.YUAN PAGE: 4 OF 5 ERP:1204000423 PACKING & LABEL SPECIFICATIONS APEKA4030SEC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAD1185 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: JUN/30/2005 DRAWN: H.Q.YUAN PAGE: 5 OF 5 ERP:1204000423 |
Price & Availability of APEKA4030SEC
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |