View APT6029SLL_1211844.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

600V 21A 0.290
APT6029BLL APT6029SLL
BLL D3PAK
TO-247
POWER MOS 7
(R)
R
MOSFET
Power MOS 7 is a new generation of low loss, high voltage, N-Channel enhancement mode power MOSFETS. Both conduction and switching (R) losses are addressed with Power MOS 7 by significantly lowering RDS(ON) (R) and Qg. Power MOS 7 combines lower conduction and switching losses along with exceptionally fast switching speeds inherent with APT's patented metal gate structure. * Lower Input Capacitance * Lower Miller Capacitance * Lower Gate Charge, Qg
MAXIMUM RATINGS
Symbol VDSS ID IDM VGS VGSM PD TJ,TSTG TL IAR EAR EAS Parameter Drain-Source Voltage Continuous Drain Current @ TC = 25C Pulsed Drain Current
1
SLL
* Increased Power Dissipation * Easier To Drive * TO-247 or Surface Mount D3PAK Package
D G S
All Ratings: TC = 25C unless otherwise specified.
APT6029BFLL_SFLL UNIT Volts Amps
600 21 84 30 40 300 2.40 -55 to 150 300 21 30
4
Gate-Source Voltage Continuous Gate-Source Voltage Transient Total Power Dissipation @ TC = 25C Linear Derating Factor Operating and Storage Junction Temperature Range Lead Temperature: 0.063" from Case for 10 Sec. Avalanche Current
1
Volts Watts W/C C Amps mJ
(Repetitive and Non-Repetitive)
1
Repetitive Avalanche Energy
Single Pulse Avalanche Energy
1210
STATIC ELECTRICAL CHARACTERISTICS
Symbol BVDSS RDS(on) IDSS IGSS VGS(th) Characteristic / Test Conditions Drain-Source Breakdown Voltage (VGS = 0V, ID = 250A) Drain-Source On-State Resistance
2
MIN
TYP
MAX
UNIT Volts
600 0.290 100 500 100 3 5
(VGS = 10V, ID = 10.5A)
Ohms A nA Volts
9-2004 050-7054 Rev D
Zero Gate Voltage Drain Current (VDS = 600V, VGS = 0V) Zero Gate Voltage Drain Current (VDS = 480V, VGS = 0V, TC = 125C) Gate-Source Leakage Current (VGS = 30V, VDS = 0V) Gate Threshold Voltage (VDS = VGS, ID = 1mA)
CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed.
APT Website - http://www.advancedpower.com
DYNAMIC CHARACTERISTICS
Symbol C iss Coss C rss Qg Qgs Qgd td(on) tr td(off) tf Eon Eoff Eon Eoff Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge
3
APT6029BLL_SLL
Test Conditions
VGS = 0V VDS = 25V f = 1 MHz VGS = 10V VDD = 300V ID = 21A @ 25C RESISTIVE SWITCHING VGS = 15V VDD = 300V ID = 21A @ 25C RG = 1.6 6 INDUCTIVE SWITCHING @ 25C VDD = 400V, VGS = 15V ID = 21A, RG = 5 6 INDUCTIVE SWITCHING @ 125C VDD = 400V VGS = 15V ID = 21A, RG = 5
MIN
TYP
MAX
UNIT
2615 420 47 65 13 36 9 5 23 4 225 90 360 110
MIN TYP MAX UNIT Amps Volts ns C V/ns nC pF
Gate-Source Charge Gate-Drain ("Miller ") Charge Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Switching Energy Turn-off Switching Energy Turn-on Switching Energy Turn-off Switching Energy
ns
J
SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS
Symbol IS ISM VSD t rr Q rr
dv/ dt
Characteristic / Test Conditions Continuous Source Current (Body Diode) Pulsed Source Current Diode Forward Voltage
1 2
21 84 1.3 580 7.92 8
MIN TYP MAX
(Body Diode) (VGS = 0V, IS = -21A)
Reverse Recovery Time (IS = -21A, dl S/dt = 100A/s) Reverse Recovery Charge (IS = -21A, dl S /dt = 100A/s) Peak Diode Recovery
dv/ dt 5
THERMAL CHARACTERISTICS
Symbol RJC RJA Characteristic Junction to Case Junction to Ambient UNIT C/W
0.42 40
1 Repetitive Rating: Pulse width limited by maximum junction temperature 2 Pulse Test: Pulse width < 380 s, Duty Cycle < 2% 3 See MIL-STD-750 Method 3471
4 Starting Tj = +25C, L = 5.49mH, RG = 25, Peak IL = 21A 5 dv/dt numbers reflect the limitations of the test circuit rather than the device itself. IS -ID21A di/dt 700A/s VR VDSS TJ 150C 6 Eon includes diode reverse recovery. See figures 18, 20.
APT Reserves the right to change, without notice, the specifications and information contained herein.
0.45
, THERMAL IMPEDANCE (C/W)
0.40 0.35 0.30 0.25
0.9
0.7
0.5 0.20 0.15 0.10 0.05 0 10-5 0.1 0.05 0.3
Note:
PDM t1 t2 Peak TJ = PDM x ZJC + TC Duty Factor D = t1/t2
9-2004
050-7054 Rev D
Z
JC
SINGLE PULSE 10-4 10-3 10-2 10-1 RECTANGULAR PULSE DURATION (SECONDS) FIGURE 1, MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs PULSE DURATION
1.0
Typical Performance Curves
60 VGS =15 &10V
ID, DRAIN CURRENT (AMPERES)
APT6029BLL_SLL
8V 7V
50 40 30 20 10 0
RC MODEL Junction temp. (C) 0.161 Power (watts) 0.259 Case temperature. (C) 0.236F 0.00994F
6.5
6V 5.5V
FIGURE 2, TRANSIENT THERMAL IMPEDANCE MODEL
RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE
80
ID, DRAIN CURRENT (AMPERES)
5V 0 5 10 15 20 25 30 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) FIGURE 3, LOW VOLTAGE OUTPUT CHARACTERISTICS 1.40
V
GS
70 60 50 40 30 20 10 0
VDS> ID (ON) x RDS(ON) MAX. 250 SEC. PULSE TEST @ <0.5 % DUTY CYCLE
NORMALIZED TO = 10V @ I = 10.5A
D
1.30 1.20 1.10 1.00 0.90 0.80 VGS=10V VGS=20V
TJ = +125C TJ = +25C TJ = -55C 0 2 4 6 8 10 VGS, GATE-TO-SOURCE VOLTAGE (VOLTS) FIGURE 4, TRANSFER CHARACTERISTICS
0
25
BVDSS, DRAIN-TO-SOURCE BREAKDOWN VOLTAGE (NORMALIZED)
1.15
10 20 30 40 50 ID, DRAIN CURRENT (AMPERES) FIGURE 5, RDS(ON) vs DRAIN CURRENT
ID, DRAIN CURRENT (AMPERES)
20
1.10
15
1.05
10
1.00
5
0.95
RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE (NORMALIZED)
50 75 100 125 150 TC, CASE TEMPERATURE (C) FIGURE 6, MAXIMUM DRAIN CURRENT vs CASE TEMPERATURE 2.5
I
D
0 25
0.90 -50
-25 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (C) FIGURE 7, BREAKDOWN VOLTAGE vs TEMPERATURE 1.2 1.1 1.0 0.9 0.8 0.7 0.6 -50
= 10.5A = 10V
V
2.0
1.5
1.0
VGS(TH), THRESHOLD VOLTAGE (NORMALIZED)
GS
0.5
0.0 -50
-25 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (C) FIGURE 8, RDS(ON) vs. TEMPERATURE
-25 0 25 50 75 100 125 150 TC, CASE TEMPERATURE (C) FIGURE 9, THRESHOLD VOLTAGE vs TEMPERATURE
050-7054 Rev D
9-2004
84
ID, DRAIN CURRENT (AMPERES)
10,000
OPERATION HERE LIMITED BY RDS (ON)
APT6029BLL_SLL
Ciss
50
100S 10
C, CAPACITANCE (pF)
1,000 Coss
100 Crss
I
D
= 21A
IDR, REVERSE DRAIN CURRENT (AMPERES)
VGS, GATE-TO-SOURCE VOLTAGE (VOLTS)
1 10 100 600 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) FIGURE 10, MAXIMUM SAFE OPERATING AREA 16 VDS=100V 12 VDS=250V
1
TC =+25C TJ =+150C SINGLE PULSE
1mS
10mS
0 10 20 30 40 50 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) FIGURE 11, CAPACITANCE vs DRAIN-TO-SOURCE VOLTAGE 200 100
10
VDS=400V
TJ =+150C TJ =+25C 10
8
4
20 30 40 50 60 70 80 90 100 Qg, TOTAL GATE CHARGE (nC) FIGURE 12, GATE CHARGE vs GATE-TO-SOURCE VOLTAGE 50 td(off) 40
0
0
10
1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 VSD, SOURCE-TO-DRAIN VOLTAGE (VOLTS) FIGURE 13, SOURCE-DRAIN DIODE FORWARD VOLTAGE 50
40
V
DD G
td(on) and td(off) (ns)
= 400V
30
tr and tf (ns)
R
= 5
30
V
DD G
tf
= 400V
T = 125C
J
L = 100H
20
20
R
= 5
T = 125C
J
tr
L = 100H
10
td(on)
10
0
0
15 20 25 30 35 ID (A) FIGURE 14, DELAY TIMES vs CURRENT
V
DD G
5
10
15 20 25 30 35 ID (A) FIGURE 15, RISE AND FALL TIMES vs CURRENT 800
V = 400V
0
0
5
10
700
= 400V
600
SWITCHING ENERGY (J)
R
= 5
700
SWITCHING ENERGY (J)
DD
I
T = 125C
J
D J
= 21A
Eoff
T = 125C
500 400 300 200 100
L = 100H E ON includes diode reverse recovery.
Eon
600 500 400 300 200 100
L = 100H E ON includes diode reverse recovery.
Eon
9-2004
Eoff
050-7054 Rev D
15 20 25 30 35 ID (A) FIGURE 16, SWITCHING ENERGY vs CURRENT
0
0
5
10
10 15 20 25 30 35 40 45 50 RG, GATE RESISTANCE (Ohms) FIGURE 17, SWITCHING ENERGY VS. GATE RESISTANCE
0
0
5
APT6029BLL_SLL
10 %
Gate Voltage
90%
td(on) tr
Drain Current
TJ = 125 C
Gate Voltage
td(off)
Drain Voltage
T = 125 C J
90% 5% 10 %
Switching Energy
5%
Drain Voltage
90% tf
10%
Drain Current
Switching Energy
Figure 18, Turn-on Switching Waveforms and Definitions
Figure 19, Turn-off Switching Waveforms and Definitions
APT15DF60
V DD
ID
V DS
G D.U.T.
Figure 20, Inductive Switching Test Circuit
TO-247 Package Outline
Drain (Heat Sink)
4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 6.15 (.242) BSC
D PAK Package Outline
4.98 (.196) 5.08 (.200) 1.47 (.058) 1.57 (.062) 15.95 (.628) 16.05 (.632) 13.41 (.528) 13.51 (.532)
3
15.49 (.610) 16.26 (.640) 5.38 (.212) 6.20 (.244)
1.04 (.041) 1.15 (.045)
Drain
20.80 (.819) 21.46 (.845) 3.50 (.138) 3.81 (.150)
Revised 4/18/95
13.79 (.543) 13.99 (.551)
Revised 8/29/97
11.51 (.453) 11.61 (.457)
0.46 (.018) 0.56 (.022) {3 Plcs}
4.50 (.177) Max. 0.40 (.016) 0.79 (.031) 2.87 (.113) 3.12 (.123) 1.65 (.065) 2.13 (.084) 1.01 (.040) 1.40 (.055)
19.81 (.780) 20.32 (.800)
Gate Drain Source
5.45 (.215) BSC {2 Plcs.}
Heat Sink (Drain) and Leads are Plated
2.21 (.087) 2.59 (.102)
5.45 (.215) BSC 2-Plcs.
Dimensions in Millimeters and (Inches)
Source Drain Gate Dimensions in Millimeters (Inches)
APT's products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved.
050-7054 Rev D
9-2004
0.020 (.001) 0.178 (.007) 2.67 (.105) 2.84 (.112)
1.27 (.050) 1.40 (.055) 1.98 (.078) 2.08 (.082)
1.22 (.048) 1.32 (.052)
3.81 (.150) 4.06 (.160) (Base of Lead)

▲Up To Search▲

Price & Availability of APT6029SLL

	To Download APT6029SLL Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .