 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CD 261 LK Series 10 000 - 12 000h at 105C * High Reliability at High Voltage * Power Supplies * Electronic Lighting Ballast * General Industry CD 110 PT 105C CD 11G GW 125C CD 261X QX highest currents CD 261 LK lower ESR longer life longest life CD 263 BK CD 262 QM Item Operating Temperature Range (C) Voltage Range (V) Capacitance Range (F) Capacitance Tolerance (20C, 120Hz) Leakage Current (A) Characteristics -25 ~ +105 160 ~ 450 6,8 ~ 220 20% After 1 minute at 20C application of rated voltage, leakage current is not more than 0,04CV + 100. C: Nominal Capacitance (F) V: Rated Voltage (V) Rated Voltage (V) 160 200 0,15 20 0 00 0,20 0 Radial Dissipation Factor (20C, 120Hz) Tan(max) Stability at Low Temperature (Impedance Ratio at 120Hz) Rated Voltage (V) Z -25C / Z +20C 160 3 200 20 4 0 00 6 0 Useful Life Lifetime Leakage Current Capacity Change Dissipation Factor Condition: Applied Voltage Applied Current Applied Temperature Failure Rate Level O 10 : 10 000h >100 000h O 12 : 12 000h Not more than specified value Within 50% of initial value Not more than 500% of specified value Load Life O 10 : 8 000h O 12 : 10 000h Not more than specified value Within 30% of initial value Not more than 300% of specified value Endurance Test O 10 : 6 000h O 12 : 8 000h Not more than specified value Within 20% of initial value Not more than 200% of specified value Shelf Life 1 000h Not more than specified value Within 20% of initial value Not more than 200% of specified value UR IR 105C 1% Failure Rate UR 1,4 x IR 60C 1% Failure Rate UR IR 105C guaranteed UR IR = 0 105C UR = 0 IR = 0 105C After test: UR to be applied for 30min >24h before measurement Multiplier for Ripple Current Frequency Coefficient 2.5 Lifetime Diagram 50Hz 0,30 120Hz 0,50 1kHz 0,80 10kHz 0,90 100kHz 1,00 Frequency Coefficient IA --- 2.0 CD 261 LK Series IR 1.5 1.0 0.5 X32 Lifetime Multiplier X16 X8 X4 X2 X1 0.0 40 50 60 70 80 90 100 110 TA (C) IA = actual ripple current at 100kHz, IR = rated ripple current at 100kHz, 105C Multiplier of Useful Life as a function of ambient temperature and ripple current load 20 Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2 CD 261 LK Series Ratings for CD 261 LK Series VDC (Surge Voltage) Code (V) Rated Max ESR Typ ESR Capacitance 20C, 100Hz 20C,100Hz Max Ripple Current 105C, 100kHz (mArms) 250 500 500 660 760 760 1 120 1 120 1 360 1 360 1 400 1 400 250 500 600 660 760 760 1 120 1 120 1 360 1 360 1 700 280 600 600 720 720 920 920 1 200 1 200 1 500 220 280 350 500 660 660 850 850 Size ODxL VDC (Surge Voltage) Code (V) Rated Max ESR Typ ESR Capacitance 20C, 100Hz 20C,100Hz Max Ripple Current 105C, 100kHz (mArms) 220 280 430 430 640 640 840 840 1 000 150 320 560 560 700 700 880 1 130 Size ODxL (F) 10 22 33 47 () 23,9 10,9 7,2 5,1 3,5 3,5 2,4 2,4 1,6 1,6 1,1 1,1 23,9 10,9 7,2 5,1 3,5 3,5 2,4 2,4 1,6 1,6 1,1 23,9 10,9 7,2 5,1 5,1 3,5 3,5 2,4 2,4 1,6 46,8 31,8 14,5 9,7 6,8 6,8 4,7 4,7 () 8,0 3,6 2,5 1,7 1,2 1,2 0,80 0,80 0,50 0,50 0,35 0,35 8,0 3,6 2,4 1,7 1,2 1,2 0,80 0,80 0,50 0,50 0,35 8,0 3,5 2,5 1,7 1,7 1,2 1,2 0,80 0,80 0,50 16,0 11,0 5,0 3,5 2,3 2,3 1,6 1,6 (mm) 10 x 16 10 x 20 10 x 20 12,5 x 20 12,5 x 25 16 x 20 16 x 25 18 x 20 16 x 31,5 18 x 25 16 x 31,5 18 x 25 10 x 16 10 x 20 12,5 x 20 12,5 x 20 12,5 x 25 16 x 20 16 x 25 18 x 20 16 x 31,5 18 x 25 18 x 31,5 10 x 20 12,5 x 20 12,5 x 20 12,5 x 25 16 x 20 16 x 25 18 x 20 16 x 31,5 18 x 25 18 x 31,5 10 x 16 10 x 20 12,5 x 20 16 x 20 16 x 25 18 x 20 16 x 31,5 18 x 25 (F) 6,8 10 22 () 46,8 31,8 14,5 14,5 9,7 9,7 6,8 6,8 4,7 46,9 31,8 14,5 14,5 9,7 9,7 6,8 4,7 () 16,0 11,0 5,0 5,0 3,5 3,5 2,3 2,3 1,6 16,0 11,0 5,0 5,0 3,5 3,5 2,3 1,6 (mm) 10 x 16 10 x 20 12,5 x 25 16 x 20 16 x 25 18 x 20 16 x 31,5 18 x 25 18 x 31,5 10 x 20 12,5 x 20 16 x 25 18 x 20 16 x 31,5 18 x 25 18 x 31,5 18 x 35,5 160 (200) 2C 68 100 150 220 10 22 33 47 400 (450) 2G 33 47 68 6,8 10 47 68 200 (250) 2D 68 100 150 220 10 22 33 250 (300) 2E 47 68 100 150 6,8 10 22 350 (400) 2V 33 47 68 Custom products are available on request. Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2 21 Radial 450 (500) 2W 22 33 Part Number System Order Code SMD, Radial, Snap-In EC Technology EC = Electrolytic Capacitor PC = Polymer Capacitor R Terminal Type SMD Radial =V =R 1C Rated Voltage Code For coding please refer to the pages of ratings PT Series Code CD VS CD VH CD VZ CD 261 CD 262 CD 26 CD 269 CD 281 CD 28 CD 287 CD 28L CD 29 CD 29 CD 29 CD 296 CD 297 CD 299 101 Capacitance Code (in F) 1,0 = 010 100 = 101 1 000 = 102 M Capacitance Tolerance = M SMD: =K Taped FF Lead Form 2 Terminal/ Pitch Size = FF 0611 Dimension 4x7 = 0407 = 0511 = 3580 JE xxxxx for Specials only = BS = VH = VZ = LK 0,47 = R47 20% 10% Terminal = T2 2,0mm 2,5mm 3,5mm 5,0mm 7,5mm = 20 = 25 = 35 = 50 = 75 5x11,5 35x80 Snap-In = S 2,2 = 2R2 +30 / -10% = Q +50 / -10% = T Radial: Long Lead = LL 6,3x11,5 = 0611 = CB = CC CD 261X = QX Cut 5,0mm Cut ,mm 45x100 = 45100 = QM 10 000 = 103 = BK = PH = LL = XY = GC = QL = BZ = BW = BC = KC = BB = PG Cut 4,0mm Cut 3,5mm Cut 3,0mm = CD = CE = CF 10,0mm = 10 12,5mm = 12 on request: alternative lead forms (axial, 90 - angle, others) Snap-In: 4,0mm Pin Length Soldering Pin preferred = T4 = S4 2 Pin 3 Pin 4 Pin 5 Pin = P2 = P3 = P4 = P5 6,mm Pin Length = T6 CD 29D = HR CD 29H = QH CD 29L HCP HPM HVC = QL = CP = PM = VC Technical Specification SMD Type Dimensions O DxL x , x , 6, x, 6,x 7,7 8 x 10, 8 x 11,8 10x10, 10x12,7 A B C E L W 1,8 4,3 4,3 1,0 5,4 2,1 5,3 5,3 1,3 5,4 2,4 6,6 6,6 2,2 5,4 2,5 6,6 6,6 2,2 7,7 2,9 8,3 8,3 3,1 10,5 2,9 8,4 8,4 3,1 11,8 3,2 10,3 10,3 4,5 10,5 3,2 10,4 10,4 4,5 12,7 in mm 0,5 - 0,8 0,7 - 1,1 Taping Dimensions Size (DxL) w 0, A 0,2 B 0,2 P 0,1 t2 0,2 F 0,1 t1 0,1 4 x 5,4 5 x 5,4 6,3 x 5,4 6,3 x 7,7 8 x 10,5 8 x 11,8 10 x 10,5 10 x 12,7 12,0 12,0 16,0 16,0 24,0 24,0 24,0 24,0 5,0 6,0 7,0 7,0 8,7 8,7 10,7 10,7 5,0 6,0 7,0 7,0 8,7 8,7 10,7 10,7 8,0 12,0 12,0 12,0 16,0 16,0 16,0 16,0 5,8 5,8 5,8 8,4 11,0 12,3 11,0 14,0 5,5 5,5 7,5 7,5 11,5 11,5 11,5 11,5 0,4 0,4 0,4 0,4 0,5 0,5 0,5 0,5 in mm Soldering Profile (Aluminium Electrolytic Capacitors) Diameter w D 4; 5 6,3 8; 10 Polymer 14 1 18 1 25 1 25 1 50 1 50 1 50 1 80 1 in mm Allowable Range of Peak Temperature Size T (C) t (second) t 1 (second) O 4 ~ 6,3 O 8 x 10,5 O 10 x 10,5 250 240 235 90 90 60 40 30 30 For more details or Soldering Profiles of Radials or Polymer-Capacitors please contact our local Sales Offices. v2006.2 8 Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com Part Number System Technical Specification Radial Type Dimensions for loose, long-lead type, (bulk) Order Code: LL L OD F L7 L 11 3 1 4 1,5 5 2,0 1,0 6,3 2,5 0,45 8 3,5 5 2,0 6,3 2,5 0,5 8 3,5 10 12,5 16 5,0 0,6 2,0 7,5 0,8 18 20 22 1,0 25 12,5 10,0 O d 0,4 aMax in mm Dimensions for Ammopack taping Order Code: FF (FD) Code Case Range OD 4~6 Dimensions F 0,5 2,5 P 0,1 12,7 A 8 13 18,5 3,5 12,7 Form L (max) H 0,75 Ho 0,5 13 18,5 - Ammopack Form A 4~8 7 17,5 Form B FF 5 ~ 6,3 13 18,5 16 12,7 B 8 22 20,0 5 10 22 18,5 A Form C 12,5 27 18,5 - 15,0 FD 12,5 27 18,5 - 25,4 C FF 16 ~ 18 27 18,5 - 7,5 30,0 in mm Dimensions for loose, short cut leads, (bulk) Order Code: CC (CB,CD,CE,CF) Straight Lead Bended Lead 2.5max Code I preferred CB 5,0 0,5 CC 4,5 0,5 CD 4,0 0,5 CE 3,5 0,5 CF 3,0 0,5 in mm Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2 9 |
Price & Availability of CD261LK
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |