View CPH6501_1228081.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number : ENN6592
CPH6501
NPN Epitaxial Planar Silicon Transistor
CPH6501
DC / DC Converter Applications
Applications
*
Package Dimensions
unit : mm 2187
[CPH6501]
0.2
0.05 2.9 0.15
Relay drivers, lamp drivers, motor drivers.
Features
*
*
1
2
0.4
0.7 0.9
0.2
3 0.95
0.6
*
Composite type with two NPN transistors contained in one package, facilitating high-density mounting. The CPH6501 consists of with two chips which are equivalent to the CPH3215. Ultrasmall-sized package permitting facilitates miniaturization in end products (0.9mm).
6
5
4
0.6 1.6 2.8
1 : Emitter1 2 : Base1 3 : Collector2 4 : Emitter2 5 : Base2 6 : Collector1 SANYO : CPH6
Specifications
Absolute Maximum Ratings at Ta=25C
Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Total Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP IB PC PT Tj Tstg Mounted on a ceramic board (600mm2!0.8mm) Mounted on a ceramic board (600mm2!0.8mm) Conditions Ratings 40 30 5 1.5 3 300 0.9 1.2 150 --55 to +125 Unit V V V A A mA W W C C
Electrical Characteristics at Ta=25C
Parameter Collector Cutoff Current Emitter Cutoff Current Symbol ICBO IEBO VCB=30V, IE=0 VEB=4V, IC=0 Conditions Ratings min typ max 0.1 0.1 Unit A A
Marking : EA
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
72100 TS IM TA-2860 No.6592-1/4
CPH6501
Continued from preceding page.
Parameter DC Current Gain Gain-Bandwidth Product Output Capacitance Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time Symbol hFE fT Cob VCE(sat) VBE(sat) V(BR)CBO V(BR)CEO V(BR)EBO t on tstg tf Conditions VCE=2V, IC=100mA VCE=10V, IC=300mA VCB=10V, f=1MHz IC=750mA, IB=15mA IC=750mA, IB=15mA IC=10A, IE=0 IC=1mA, RBE= IE=10A, IC =0 See specified Test Circuit See specified Test Circuit See specified Test Circuit 40 30 5 35 205 30 Ratings min 200 500 8 150 0.85 225 1.2 typ max 560 MHz pF mV V V V V ns ns ns Unit
Switching Time Test Circuit
PW=20s D.C.1% INPUT VR 50 IB1 IB2 RB + 100F VBE= --5V 20IB1= --20IB2=IC=750mA + 470F VCC=12V OUTPUT
Electrical Connection
C1 B2 E2
RL 16
E1
B1
C2
2.0 1.8 1.6
IC -- VCE
40mA
1.6
IC -- VBE
VCE=2V
30m
A
20mA
1.4
Collector Current, IC -- A
Collector Current, IC -- A
50m
1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 0.1
8mA
10mA
1.2 1.0 0.8 0.6 0.4 0.2
A
6mA
4mA
2mA
IB=0
0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
0 0 0.2 0.4 0.6 0.8 1.0 1.2 IT01676
Collector-to-Emitter Voltage, VCE -- V
1000 7 5
IT01674 3 2
hFE -- IC
VCE=2V Ta=75C 25C --25C
Base-to-Emitter Voltage, VBE -- V
f T -- IC
Ta=75
C 25C --25C
VCE=10V
Gain-Bandwidth Product, f T -- MHz
1000 7 5 3 2
DC Current Gain, hFE
3 2
100 7 5 3 2
100 7 5 3
10 0.01
2
3
5
7
0.1
2
3
5
7
1.0
2
3
2 0.01
2
3
5
7
0.1
2
3
5
7
Collector Current, IC -- A
IT01678
Collector Current, IC -- A
2 1.0 IT01680
No.6592-2/4
CPH6501
100 7
Cob -- VCB
f=1MHz Collector-to-Emitter Saturation Voltage, VCE(sat) -- V
1.0 7 5 3 2
VCE(sat) -- IC
IC / IB=20
Output Capacitance, Cob -- pF
5 3 2
0.1 7 5 3 2
10 7 5 3 2 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 3 5
C 75 Ta= C --25
2 3 5 7 0.1
25
C
0.01 0.01
2
3
5
7 1.0
2
3
Collector-to-Base Voltage, VCB -- V
1.0 7
IT01682 10
Collector Current, IC -- A
IT01684
VCE(sat) -- IC
IC / IB=50 Base-to-Emitter Saturation Voltage, VBE(sat) -- V
VBE(sat) -- IC
IC / IB=50
7 5 3 2
Collector-to-Emitter Saturation Voltage, VCE(sat) -- V
5 3 2
0.1 7 5 3 2
1.0 7 5 3 2
Ta= --25C
75C
25C
C 75
2 Ta= -5C
25
C
0.01 0.01
2
3
5
7
0.1
2
3
5
7
1.0
2
3
0.1 0.01
2
3
5
7
0.1
2
3
5
7
1.0
2
3
Collector Current, IC -- A
IT01686 1.4
ASO
Collector Current, IC -- A
IT01688
10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 0.01
PC -- Ta
Collector Current, IC -- A
IC=1.5A
DC op
Collector Dissipation, PC -- W
ICP=3.0A
10 s 0
1.2
50
10
1.0 0.9 0.8
10
er
0m
ms
0 s
1m s
ati
s on
To t
al
0.6
1u
Di
nit
ss
ip
ati
on
0.4
Ta=25C Single pulse Mounted on a ceramic board(600mm2!0.8mm)
2 3 5 7 1.0 2 3 5 7 10 2 3
0.2 0 7 100 IT02326 5 0
Mounted on a ceramic board(600mm2!0.8mm)
20 40 60 80 100 120 140 160
0.1
Collector-to-Emitter Voltage, VCE -- V
1.0
Ambient Temperature, Ta -- C
IT02327
PC(TR2) -- PC(TR1)
Collector Dissipation, PC(TR2) -- W
0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0
Mounted on a ceramic board(600mm2!0.8mm)
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
Collector Dissipation, PC(TR1) -- W
IT02328
No.6592-3/4
CPH6501
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of July, 2000. Specifications and information herein are subject to change without notice.
PS No.6592-4/4

▲Up To Search▲

Price & Availability of CPH6501

	To Download CPH6501 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .