View CY3950I_1230354.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

CY3900I / CY3950I
Delta39KTMUltra37000TM ISRTM Programming Kits
Features
* Supports Cypress's Ultra37000TM, Ultra37000VTM, Delta39KTM, and PSITM families of products * STAPL (Chain Dependent and Chain Independent) programming language support * SVF programming language support * Standard JTAG programming interface * Multi-device programming * Easy to use Windows XP-TM, Windows 2000-TM, Windows ME-TM, Windows 98-TM, and Windows NTTM-compatible interface * Eliminates programming insertion to improve manufacturing efficiency * For programming in the lab, on manufacturing floor, or at remote sites * ATE support via STAPL on industry leading ATE platforms
Functional Description
The Delta39K/Ultra37000 ISR Programming Kit enables users to program Ultra37000, Ultra37000V, Delta39K, and PSI CPLDs on board with our ISR Programming Software, the C3ISR or USBISR Programming Cable, and a personal computer. The C3ISR Programming Cable connects to the parallel port of a PC and the USBISR Programming Cable[3] connects to a USB 1.1/USB 2.0 port of a PC into a standard 10-pin male connector mounted on the user's board. The ISR software provides an easy-to-use Graphical User Interface that accepts JEDEC or hex files as input. The JEDEC/.hex files are used to compose platform independent STAPL/SVF files. STAPL/SVF files contain all the information needed to program the device. The ISR software is used to define how many devices are in the daisy chain and what operation is to be done on each Cypress device. The same chain can be used with other JTAG-compliant devices. The ISR User's Guide describes the operation of the ISR software. The application notes included with the kit describe all system design considerations for programming with this Programming Kit. 10-pin Programming Connector The diagram below shows the pinout of the 10-pin male connector to be mounted onto the board. The view looking down onto the board connector pins is shown below. TDO GND VCC NC ISR[2] TDI JTAGen TCK GND[2] TMS
CY3900I Kit Contents
* ISR Programming Software Release 4.0 * C3ISRTM Programming Cable[3] for use with Ultra37000, Delta39K, and PSI CPLD families * Delta39K/Ultra37000 prototype board[1] * ISR application notes
CY3950I Kit Contents
* ISR Programming Software Release 4.0 * USBISR Programming Cable[3] for use with Ultra37000, Delta39K, and PSI CPLD families * Delta39K/Ultra37000 prototype board[1] * ISR application notes
In-System ReprogrammableTM (ISRTM) Programming (using C3ISR cable[3]) VCC
Cypress Device
10-pin
Cable
PC
25-pin
Parallel Port
Cypress Device Designer's Board 10-pin ISR Connector
Notes: 1. Cypress reserves the right to substitute prototype boards based on product availability. 2. Refer to the CD-ROM ISR User's Guide documentation for detailed information on ISR programming and electrical specification requirements. 3. The C3ISR Programming Cable is available in the CY3900I Programming Kit and the USBISR Programming Cable is available in the CY3950I Programming Kit.
Cypress Semiconductor Corporation Document #: 38-03009 Rev. *C
*
3901 North First Street
*
San Jose, CA 95134 * 408-943-2600 Revised October 09, 2003
CY3900I / CY3950I
In-System ReprogrammableTM (ISRTM) Programming (using USBISR cable[3]) VCC
Cypress Device
10-pin
Cable
PC
USB
USB 1.1 / USB 2.0 Port
Cypress Device Designer's Board 10-pin ISR Connector
Table 1. C3ISR / USBISR Cable Pin Descriptions Pin JTAGen ISR* VCC TDO TMS TCK TDI NC GND Type OUTPUT OUTPUT INPUT INPUT OUTPUT OUTPUT OUTPUT NC -- Description In System Reprogramming JTAG Enable (active HIGH). In System Reprogramming Enable Indicator (active LOW). +5V and +3.3V Supply Voltage provided from the target system to the cable. Test Data Output Receiver. The TDO output pin of the last device in the ISR chain of the system is connected to this input pin. Test Mode Control. This is the mode select control input for the TAP controller state machine contained in the ISR interface. Test Clock. ISR interface clock. Test Data Input Driver. This output pin is connected to the TDI input of the first device in the ISR chain. No Connect. Zero volt common ground for PC and target system. Pin cross-section is 0.025" x 0.025". Part Number Digi-Key(R) S2012-05-ND (straight-pin connector). Digi-Key S2112-05-ND (right-angle connector). To facilitate easy and quick prototyping of designs, a Delta39K/Ultra37000 Prototype Board[4] has been included in the CY3900i Delta39/Ultra37000 ISR Programming Kit. The prototype board comes with a CY37256VP160 device and a CY39100V208 device already premounted and header strips that facilitate signal testing. Detailed information on the board layout and proper usage may be found in the Cypress application note, Using the Delta39K ISR Prototype Board.
Table 1 describes the function of each of these pins on the C3ISR and USBISR Programming Cables. An OUTPUT is provided by the PC and an INPUT is provided by the target system. The dimensions of the male connector required for the C3ISR and the USBISR Programming Cables are given below. Male Connector 2 x 5 = 2 rows, 5 pins per row Measuring from center of the pins, each pin is 0.1" from the others. Pin length is 0.23".
Document #: 38-03009 Rev. *C
Page 2 of 4
CY3900I / CY3950I
ISR 10-pin Connector 10-pin Connector
J2
J3
VCCO GND
Power Connector
CY39100V208 208-pin TQFP
Header Strips
CY37256VP160 160-pin TQFP
Header Strips
Daisy Chain Jumpers
LED
VCC GND
Power Connector
Figure 1. Delta39K/Ultra37000 Prototype Board
PC System Requirements
* IBM PC or compatible running Windows 98, Windows 98 Second Edition, Windows ME, Windows NT 4.0 Service Pack 5 or later or Windows 2000 Service Pack 1 or later and Windows XP. * One free parallel, USB 1.1 or 2.0 (recommended) port * A minimum of 32 MB of RAM. * Approximately 30 MB of free hard disk space.
Ordering Information
Product Code CY3950I CY3900I Description Delta39K/Ultra37000 ISR Programming Kit (with USBISR Programming Cable) Delta39K/Ultra37000 ISR Programming Kit (with C3ISR parallel Programming Cable)
Windows 98, Windows ME, Windows 2000, Windows NT and Windows XP are trademarks of Microsoft Corporation. Digi-Key is a registered trademark of Digi-Key Corporation. ISR, C3ISR, USBISR, Ultra37000, Delta39K, and PSI are trademarks of Cypress Semiconductor.
Note: 4. See Figure 1 for the basic layout.
Document #: 38-03009 Rev. *C
Page 3 of 4
(c) Cypress Semiconductor Corporation, 2003. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress Semiconductor product. Nor does it convey or imply any license under patent or other rights. Cypress Semiconductor does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress Semiconductor products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress Semiconductor against all charges.
CY3900I / CY3950I
Document History Page
Document Title: Delta39KTM/Ultra37000TM ISRTM Programming Kit Document Number: 38-03009 REV. ** *A *B *C ECN NO. 108980 111228 127867 130222 Issue Date 08/07/01 01/23/02 08/18/03 10/09/03 Orig. of Change HOW CNH FSG FSG New Data Sheet Removed references to Windows 95 Removed Quantum38K from all pages Added CY3950I kit Description of Change
Document #: 38-03009 Rev. *C
Page 4 of 4

▲Up To Search▲

Price & Availability of CY3950I

	To Download CY3950I Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .