 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Accessories Software Du line (R) Fieldbus Installationbus SYSCON Terminal Emulator Software Type D 9091 Product Description The SYSCON terminal emulator software is used to convert standard IBM compatible PCs into terminals that allow menu driven configuration of the master generator D 3890 ... and the modem interface D 9091 ... . Ordering Key Type: Dupline(R) Type no. Disc size D 9091 SW013 Type Selection Disc size 3.5" Disc 5.25" Disc Ordering no. D 9091 SW013 D 9091 SW015 Hardware Requirements Standard IBM compatible PC (XT, AT) DOS version: 3.1 or later Disc drive: standard 3.5" or 5.25" Serial port Connection cable Mode of Operation In addition to the functions that are performed with the D 3890 SW.. above, the SYSCON emulator software is used to entirely configure the Dupline(R) modem interface unit D 9091.. . The configuration procedure for either Dupline(R) device is described in detail in the respective user manual. Therefore please refer to the user manual for the Dupline(R) modem interface (MAN D 90xx) or the Dupline master generator (MAN D 3890) for more information. Optolink Support Software Type D 7191 Product Description Support software for D 7191 Optolinks to control and monitor data from Dupline(R) installations of up to 63 Optolinks with 128 channels each. Enabling the creation of programs to dynamically access the system in a structured way. The support software assists the user in creating his own programs in either BASIC or Pascal. Ordering Key Type: Dupline Type no. Disc size (R) D 7191 SW023 Type Selection Disc size 3.5" Disc 5.25" Disc Ordering no. D 7191 SW023 D 7191 SW025 Hardware Requirements Standard IBM compatible PC (XT, AT) DOS version: 2.1 or later Disc drive: standard 3.5" or 5.25" One serial port 640 K Byte memory Interface G 3491 0090 Optolink G 3491 0000 Mode of Operation The Carlo Gavazzi Optolink support software helps the user to establish a communication program between a standard PC and the Optolink. This means that a complete network of sensors and actuators can be directly controlled from the PC. The software gives the programmer the opportunity to create his own software by using some of the support software files. With the Demo file, reading and controlling the Dupline I/O status on each of the 128 channels for each Optolink is performed. Specifications are subject to change without notice (28.09.99) Dupline(R) is a registered trademark. A product of the CARLO GAVAZZI Group 1 |
Price & Availability of D9091SW015
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |