![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
INTRODUCTION This easy-to-use kit provides a platform for the evaluation of the PB50 and PB58 high voltage power boosters. The PB50 and PB58 are designed most commonly in combination with a small signal, general purpose op amp. However, they can also be used without a driver amplifier. This kit can be used to analyze a multitude of standard or proprietary circuit configurations. PARTS LIST Part # HS13 EVAL01 MS03 HWRE02 HWRE05 TW0 3 Description Heatsink PC Board Mating Socket Hardware Kit 8-Pin Wire Wrap Socket Thermal Washer Quantity 1 1 1 1 1 1 Box/10 HWRE02 contains the following: 4 #8 x .375" Panhead Screws 4 #8 x .375" Hex Spacers 4 #8 x 2.00" Hex Stand Offs 2 #6 x 1.25" Panhead Screws 2 #6 x 5/16" Hex Nuts ASSEMBLY CAUTION 1. Use thermal grease or Apex Thermal Washer TW03 between power booster and heatsink. 2. Use 18 gauge teflon sleeve on at least two opposite pins 3. Mounting torque greater than 7 in*lbs on power booster mounting bolts will void warranty! APEX MICROTECHNOLOGY CORPORATION * TELEPHONE (520) 690-8600 * FAX (520) 888-3329 * ORDERS (520) 690-8601 * EMAIL prodlit@apexmicrotech.com 1 EK50 EVALUATION KIT FOR PB50/PB58 POWER BOOSTERS EQUIVALENT SCHEMATIC This data sheet has been carefully checked and is believed to be reliable, SHANNON ROAD * is assumed ARIZONA 85741 * omissions. All specifications are subject 1 (800) 546-2739 APEX MICROTECHNOLOGY CORPORATION * 5980 NORTH however, no responsibility TUCSON, for possible inaccuracies orUSA * APPLICATIONS HOTLINE: to change without notice. 2 EK50U REV D OCTOBER 2004 (c) 2004 Apex Microtechnology Corp. |
Price & Availability of EK50
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |