 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HD74ALVC2G07 Triple Buffers / Drivers with Open Drain ADE-205-633A (Z) Rev. 1 August. 2001 Description The HD74ALVC2G07 has triple buffers / drivers with open drain outputs in a 8 pin package. Low voltage and high speed operation is suitable for the battery powered products (e.g., notebook computers), and the low power consumption extends the battery life. Features * The basic gate function is lined up as hitachi uni logic series. * Supplied on emboss taping for high speed automatic mounting. * Supply voltage range : 1.2 to 3.6 V Operating temperature range : -40 to +85C * All inputs VIH (Max.) = 3.6 V (@VCC = 0 V to 3.6 V) All outputs VO (Max.) = 3.6 V (@VCC = 0 V) * Output current 2 mA (@VCC = 1.2 V) 4 mA (@VCC = 1.4 V to 1.6 V) 6 mA (@VCC = 1.65 V to 1.95 V) 18 mA (@VCC = 2.3 V to 2.7 V) 24 mA (@VCC = 3.0 V to 3.6 V) * Package type Package type SSOP-8 pin Package code TTP-8DB Package suffix US Taping code E (3,000 pcs / Reel) HD74ALVC2G07 Outline and Article Indication * HD74ALVC2G07 Index band Lot No. YMW A07 SSOP-8 Type No. Y : Year code (the last digit of year) M : Month code W : Week code Function Table Input A L H H: L: Z: High level Low level High impedance Output Y L Z Rev.1, Aug. 2001, page 2 of 10 HD74ALVC2G07 Pin Arrangement 1A 1 8 VCC 3Y 2 7 1Y 2A 3 6 3A GND 4 5 2Y (Top view) Absolute Maximum Ratings Item Supply voltage range Input voltage range *1 *1, 2 Symbol VCC VI VO IIK IOK IO ICC or IGND PT Tstg Ratings -0.5 to 4.6 -0.5 to 4.6 -0.5 to VCC+0.5 -0.5 to 4.6 -50 50 50 100 200 -65 to 150 Unit V V V Conditions Output voltage range Output : L or Z VCC : OFF Input clamp current Output clamp current Continuous output current Continuous current through VCC or GND Maximum power dissipation *3 at Ta = 25C (in still air) Storage temperature Notes: mA mA mA mA mW C VI < 0 VO < 0 or VO > VCC VO = 0 to VCC The absolute maximum ratings are values which must not individually be exceeded, and furthermore, no two of which may be realized at the same time. 3. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 3. This value is limited to 4.6 V maximum. 3. The maximum package power dissipation was calculated using a junction temperature of 150C. Rev.1, Aug. 2001, page 3 of 10 HD74ALVC2G07 Recommended Operating Conditions Item Supply voltage range Input voltage range Output voltage range Output current Symbol VCC VI VO IOL Min 1.2 0 0 Input transition rise or fall rate t / v 0 0 Operating free-air temperature Ta -40 Note: Unused or floating inputs must be held high or low. Max 3.6 3.6 VCC 2 4 6 18 24 20 10 85 C ns / V Unit V V V mA VCC = 1.2 V VCC = 1.4 V VCC = 1.65 V VCC = 2.3 V VCC = 3.0 V VCC = 1.2 to 2.7 V VCC = 3.30.3 V Conditions Rev.1, Aug. 2001, page 4 of 10 HD74ALVC2G07 Electrical Characteristics (Ta = -40 to 85C) Item Input voltage Symbol VIH VCC (V) 1.2 1.4 to 1.6 1.65 to 1.95 2.3 to 2.7 3.0 to 3.6 VIL 1.2 1.4 to 1.6 1.65 to 1.95 2.3 to 2.7 3.0 to 3.6 Output voltage VOL Min to Max 1.2 1.4 1.65 2.3 3.0 Input current Off state output current Quiescent supply current Output leakage current Input capacitance IIN IOZ ICC IOFF CIN 3.6 3.6 3.6 0 3.3 * Min VCCx0.7 VCCx0.7 1.7 2.0 Typ 5.0 Max VCCx0.25 VCCx0.3 VCCx0.3 0.7 0.8 0.2 0.3 0.3 0.3 0.55 0.55 5 5 10 5 Unit V Test conditions VCCx0.75 V IOL = 100 A IOL = 2 mA IOL = 4 mA IOL = 6 mA IOL = 18 mA IOL = 24 mA A A A A pF VIN = 3.6 V or GND VOUT = VCC or GND VIN = VCC or GND, IO = 0 VIN or VO = 0 to 3.6 V VIN = VCC or GND Note: For conditions shown as Min or Max, use the appropriate values under recommended operating conditions. Rev.1, Aug. 2001, page 5 of 10 HD74ALVC2G07 Switching Characteristics (Ta = -40 to 85C) * VCC = 1.2 V Symbol tLZ tZL Min Typ 5.5 Max Unit ns Test conditions CL = 15 pF FROM (Input) A TO (Output) Y Item Propagation delay time * VCC = 1.50.1 V Symbol tLZ tZL Min 1.0 Typ Max 7.0 Unit ns Test conditions CL = 15 pF FROM (Input) A TO (Output) Y Item Propagation delay time * VCC = 1.80.15 V Symbol tLZ tZL Min 1.0 Typ Max 5.0 Unit ns Test conditions CL = 30 pF FROM (Input) A TO (Output) Y Item Propagation delay time * VCC = 2.50.2 V Symbol tLZ tZL Min 0.5 Typ Max 3.5 Unit ns Test conditions CL = 30 pF FROM (Input) A TO (Output) Y Item Propagation delay time * VCC = 3.30.3 V Symbol tLZ tZL Min 0.5 Typ Max 2.5 Unit ns Test conditions CL = 30 pF FROM (Input) A TO (Output) Y Item Propagation delay time Rev.1, Aug. 2001, page 6 of 10 HD74ALVC2G07 Operating Characteristics (Ta = 25C) Item Power dissipation capacitance Symbol CPD VCC (V) 1.5 1.8 2.5 3.3 Min Typ 2.0 2.0 2.5 3.5 Max Unit pF Test conditions f = 10 MHz Test Circuit *1 VCC VCC x 2 or 6.0 V RL Pulse Generator Z out = 50 CL RL Input Output Symbol RL CL *1 V CC = 1.2 V, V = 1.80.15 V V CC = 2.50.2 V V CC = 3.30.3 V 1.50.1 V CC 2.0 k 15 pF VCC x 2 1.0 k 30 pF VCC x 2 500 30 pF VCC x 2 500 30 pF 6.0 V Note: CL includes probe and jig capacitance. Rev.1, Aug. 2001, page 7 of 10 HD74ALVC2G07 Waveforms tf tr 90% Input V ref 10% t ZL 10% 90% V ref VIH GND t LZ VOH Output V ref VL VOL Symbol tr / t f V IH V ref VL V CC = 1.2 V, V CC = 1.80.15 V V CC = 2.50.2 V 1.50.1 V 2.0 ns VCC 50% VL = VOL+0.1 V 2.0 ns VCC 50% 2.5 ns VCC 50% V CC = 3.30.3 V 2.5 ns 2.7 V 1.5 V VL = VOL+0.15 V VL = VOL+0.15 V VL = VOL+0.3 V Note: Input waveform : PRR = 10 MHz, duty cycle 50% Rev.1, Aug. 2001, page 8 of 10 HD74ALVC2G07 Package Dimensions 1.50 As of January, 2001 (0.4) + 0.05 0.13 - 0.03 0.5 0.5 0.5 Unit: mm 0 - 0.1 2.3 0.1 8 - 0.2 - 0.04 2.0 0.1 + 0.05 (0.17) (0.4) 0.7 0.1 3.1 0.1 Hitachi Code JEDEC EIAJ Mass (reference value) TTP-8DB 0.25 g Rev.1, Aug. 2001, page 9 of 10 HD74ALVC2G07 Disclaimer 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi's or any third party's patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party's rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi's sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi's sales office for any questions regarding this document or Hitachi semiconductor products. Sales Offices Hitachi, Ltd. Semiconductor & Integrated Circuits Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: (03) 3270-2111 Fax: (03) 3270-5109 URL NorthAmerica Europe Asia Japan : : : : http://semiconductor.hitachi.com/ http://www.hitachi-eu.com/hel/ecg http://sicapac.hitachi-asia.com http://www.hitachi.co.jp/Sicd/indx.htm Hitachi Asia Ltd. Hitachi Tower 16 Collyer Quay #20-00 Singapore 049318 Tel : <65>-538-6533/538-8577 Fax : <65>-538-6933/538-3877 URL : http://www.hitachi.com.sg Hitachi Asia Ltd. (Taipei Branch Office) 4/F, No. 167, Tun Hwa North Road Hung-Kuo Building Taipei (105), Taiwan Tel : <886>-(2)-2718-3666 Fax : <886>-(2)-2718-8180 Telex : 23222 HAS-TP URL : http://www.hitachi.com.tw Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower World Finance Centre, Harbour City, Canton Road Tsim Sha Tsui, Kowloon Hong Kong Tel : <852>-(2)-735-9218 Fax : <852>-(2)-730-0281 URL : http://semiconductor.hitachi.com.hk For further information write to: Hitachi Semiconductor (America) Inc. 179 East Tasman Drive San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe Ltd. Electronic Components Group Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 585200 Hitachi Europe GmbH Electronic Components Group Dornacher Strae 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Copyright (c) Hitachi, Ltd., 2001. All rights reserved. Printed in Japan. Colophon 4.0 Rev.1, Aug. 2001, page 10 of 10 This datasheet has been download from: www..com Datasheets for electronics components. |
Price & Availability of HD74ALVC2G07
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |