View HFA140MD60C_1249205.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PD - 40009 rev. A 01/99
HFA140MD60C
HEXFRED
Features
Reduced RFI and EMI Reduced Snubbing Extensive Characterization of Recovery Parameters
TM
Ultrafast, Soft Recovery Diode
LUG LUG LUG TERMINAL TERMINAL TERMINAL ANODE 1 CATHODE ANODE 2
Isolated Base
VR = 600V VF (typ.) = 1.2V IF(AV) = 140A Qrr (typ.) = 360nC IRRM(typ.) = 8.0A trr(typ.) = 35ns di(rec)M/dt (typ.) = 230A/s
Description
HEXFRED diodes are optimized to reduce losses and EMI/RFI in high frequency power conditioning systems. An extensive characterization of the recovery behavior for different values of current, temperature and di/dt simplifies the calculations of losses in the operating conditions. The softness of the recovery eliminates the need for a snubber in most applications. These devices are ideally suited for power converters, motors drives and other applications where switching losses are significant portion of the total losses.
TM
Absolute Maximum Ratings (per Leg)
Parameter
VR IF @ TC = 25C IF @ TC = 100C IFSM PD @ T C = 25C PD @ TC = 100C TJ TSTG Cathode-to-Anode Voltage Continuous Forward Current Continuous Forward Current Single Pulse Forward Current Maximum Power Dissipation Maximum Power Dissipation Operating Junction and Storage Temperature Range
TO-244AB (ISOLATED)
Max.
600 99 48 600 227 91 -55 to +150
Units
V A W C
Thermal - Mechanical Characteristics
Parameter
RthJC RthCS Wt Junction-to-Case, Single Leg Conducting Junction-to-Case, Both Legs Conducting Case-to-Sink, Flat , Greased Surface Weight Mounting Torque Terminal Torque Vertical Pull 2 inch Lever Pull
Min.
30 (3.4) 30 (3.4)
Typ.
0.10 79 (2.8)
Max.
0.55 0.275 40 (4.6) 40 (4.6) 80 35
Units
C/W K/W g (oz) lbfin (Nm) lbfin
Note: Limited by junction temperature 125C
Mounting surface must be smooth, flat, free or burrs or other protrusions. Apply a thin even film or thermal grease to mounting surface. Gradually tighten each mounting bolt in 5-10 lbfin steps until desired or maximum torque limits are reached. Module
1
HFA140MD60C
PD-40009 rev. A 01/99
Electrical Characteristics (per Leg) @ TJ = 25C (unless otherwise specified)
Parameter
VBR VFM Cathode Anode Breakdown Voltage Max Forward Voltage
Min. Typ. Max. Units
600 1.3 1.7 1.5 2.0 1.2 1.5 3.9 15 1300 4300 200 300 6.0 V V A pF nH
Test Conditions
IR = 100A IF = 70A See Fig. 1 IF = 140A IF = 70A, T J = 125C See Fig. 2 VR = VR Rated TJ = 125C, VR = 480V See Fig. 3 VR = 200V From top of terminal hole to mounting plane
IRM CT LS
Max Reverse Leakage Current Junction Capacitance Series Inductance
Dynamic Recovery Characteristics (per Leg)@ TJ = 25C (unless otherwise specified)
Parameter
trr trr1 trr2 IRRM1 IRRM2 Qrr1 Qrr2 di(rec)M/dt1 di(rec)M/dt2 Reverse Recovery Time See Fig. 5, 10 Peak Recovery Current See Fig. 6 Reverse Recovery Charge See Fig. 7 Peak Rate of Fall of Recovery Current During tb See Fig. 8
Min. Typ. Max. Units
35 90 140 ns 155 230 8.0 15 A 14 25 360 1100 nC 1100 2900 300 A/s 230
Test Conditions
IF = 1.0A, di f/dt = 200A/s, V R = 30V TJ = 25C TJ = 125C IF = 70A TJ = 25C TJ = 125C VR = 200V TJ = 25C TJ = 125C dif/dt = 200A/s TJ = 25C TJ = 125C
80.01 (3.150) 40.26 (1.585) 39.75 (1.565)
20.32 (0.800) 17.78 (0.700)
7.49 (0.295) 6.99 (0.275) DIA. (2 PLCS.)
34.925 (1.375) REF. 63.50 (2.500) 60.96 (2.400)
LEAD ASSIGNMENTS 1 - ANODE 2 - CATHODE 3 - ANODE
1/4-20 SLOTTED HEX
1
23.55 (0.927) 20.42 (0.804)
2
3
OUTLINE TO-244AB (ISOLATED)
Dimensions in Millimeters and (Inches)
15.75 (0.620) 14.99 (0.590)
92.71 (3.650) 90.17 (3.550)
3.35 (0.132) 3.02 (0.119)
2
HFA140MD60C
1000
10000
PD-40009 rev. A 01/99
TJ = 150C
Reverse Current - IR (A)
1000
TJ = 125C
100
Instantaneous Forward Current - I F (A)
10
100
TJ = 150C TJ = 125C T = 25C
J
1
TJ = 25C
0.1 0 200 400 600
Reverse Voltage - V R (V)
10
Fig. 2 - Typical Reverse Current vs. Reverse Voltage, (per Leg)
10000
A
Junction Capacitance -CT (pF)
T = 25C J
1000
1 0.0 1.0 2.0 3.0 4.0
Forward Voltage Drop - V FM (V)
Fig. 1 - Maximum Forward Voltage Drop vs. Instantaneous Forward Current, (per Leg)
100 1 10 100 1000
Reverse Voltage - V R (V)
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage, (per Leg)
1
Thermal Response (Z thJC)
D = 0.50 0.20 0.1 0.10 0.05 0.02 0.01 P DM t1 t2 Notes: 1. Duty factor D = t 1 / t 2 2. Peak T J = P DM x Z thJC + TC 0.0001 0.001 0.01 0.1 1
0.01
SINGLE PULSE (THERMAL RESPONSE)
0.001 0.00001
t1 , Rectangular Pulse Duration (sec)
Fig. 4 - Maximum Thermal Impedance Zthjc Characteristics, (per Leg)
3
HFA140MD60C
PD-40009 rev. A 01/99
200
100
I F = 140A I F = 70A
160
I F = 140A I F = 70A I F = 40A
I F = 40A
trr- (ns)
120
Irr- ( A)
VR = 200V TJ = 125C TJ = 25C
10
80
VR = 200V TJ = 125C TJ = 25C
40 100
di f /dt - (A/s)
1000
1 100
di f /dt - (A/s)
1000
Fig. 5 - Typical Reverse Recovery Time vs. dif/dt, (per Leg)
4000 VR = 200V TJ = 125C TJ = 25C
Fig. 6 - Typical Recovery Current vs. dif/dt, (per Leg)
10000 VR = 200V TJ = 125C TJ = 25C
3000
I F = 140A
I F = 140A
di (rec) M/dt- (A /s)
I F = 70A I F = 40A
I F = 70A I F = 40A
1000
Qrr- (nC)
2000
1000
0 100
di f /dt - (A/s)
1000
100 100
di f /dt - (A/s)
1000
Fig. 7 - Typical Stored Charge vs. dif /dt, (per Leg)
4
Fig. 8 - Typical di(rec)M/dt vs. dif/dt, (per Leg)
HFA140MD60C
3
PD-40009 rev. A 01/99
IF
trr ta tb
4
REVERSE RECOVERY CIRCUIT
VR = 200V
0 Q rr I RRM
2
0.5 I RRM di(rec)M/dt
5
0.01 L = 70H D.U.T. D IRFP250 S
1
0.75 I RRM di f /dt
4. Qrr - Area under curve defined by trr and IRRM trr X IRRM Qrr = 2 5. di(rec)M/dt - Peak rate of change of current during tb portion of trr
dif/dt ADJUST G
1. dif /dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going I F to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current
Fig. 9 - Reverse Recovery Parameter Test Circuit
L = 100H HIGH-SPEED SWITCH Rg = 25 ohm CURRENT MONITOR FREE-WHEEL DIODE + Vd = 50V
Fig. 10 - Reverse Recovery Waveform and Definitions
I L(PK)
DUT
DECAY TIME V (AVAL) V R(RATED)
Fig. 11 - Avalanche Test Circuit and Waveforms
WORLD HEADQUARTERS: EUROPEAN HEADQUARTERS: IR CANADA: IR GERMANY: IR ITALY: IR FAR EAST: IR SOUTHEAST ASIA: IR TAIWAN:
233 Kansas St., El Segundo, California 90245 U.S.A. Tel: (310) 322 3331. Fax: (310) 322 3332. Hurst Green, Oxted, Surrey RH8 9BB, U.K. Tel: ++ 44 1883 732020. Fax: ++ 44 1883 733408. 15 Lincoln Court, Brampton, Markham, Ontario L6T3Z2. Tel: (905) 453 2200. Fax: (905) 475 8801. Saalburgstrasse 157, 61350 Bad Homburg. Tel: ++ 49 6172 96590. Fax: ++ 49 6172 965933. Via Liguria 49, 10071 Borgaro, Torino. Tel: ++ 39 11 4510111. Fax: ++ 39 11 4510220. K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo, Japan 171. Tel: 81 3 3983 0086. 1 Kim Seng Promenade, Great World City West Tower,13-11, Singapore 237994. Tel: ++ 65 838 4630. 16 Fl. Suite D.207, Sec. 2, Tun Haw South Road, Taipei, 10673, Taiwan. Tel: 886 2 2377 9936.
http://www.irf.com
Fax-On-Demand: +44 1883 733420
Data and specifications subject to change without notice.
5
This datasheet has been download from: www..com Datasheets for electronics components.

▲Up To Search▲

Price & Availability of HFA140MD60C

	To Download HFA140MD60C Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .