 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 2.5 X 7.4 mm RECTANGULAR SOLID STATE LAMPS HIGH EFFICIENCY RED HLMP- 0300/1 YELLOW HLMP- 0400/1 HIGH EFFICIENCY GREEN HLMP- 0503/4 PACKAGE DIMENSIONS FEATURES * Wide viewing angle * Solid state reliability .315 (8.00) .290 (7.37) * Perfect for panel indicators 1.00 (25.4) MIN. CATHODE .050 (1.27) NOMINAL ANODE DESCRIPTION .295 (7.49) .275 (6.99) .100 (2.54) NOMINAL .018 (.45) SQ NOMINAL 2 PLS The HLMP-0X0X series of rectangular lamps are direct replacements for Agilent's series with the same part numbers. The series is similar to MV5X123 except for the larger lens size. Like the MV5X123, the HLMP-0X0X is stackable. The lamps are tinted and diffused. .100 (2.54) .090 (2.29) NOTES: 1. ALL DIMENSIONS ARE IN INCHES (mm). 2. TOLERANCES ARE 0.010" INCH UNLESS SPECIFIED. 3. AN EPOXY MENISCUS MAY EXTEND ABOUT 0.040" (1mm) DOWN THE LEADS. ABSOLUTE MAXIMUM RATING Parameter Power Dissipation (HLMP-040X=85mA) (TA =25C) HER 135 90 30 5 -55 to +100 -55 to +100 YELLOW 135 90 20 5 -55 to +100 -55 to +100 HEG 135 60 30 5 -50 to +100 -50 to +100 UNITS mW mA mA sec C C Peak Forward Current (1sec pluse, 0.3% DC) Continuous DC Forward Current Lead Soldering Time at 260 C Operating Temperature Storage Temperature 2001 Fairchild Semiconductor Corporation DS300002 2/27/01 1 OF 4 www.fairchildsemi.com 2.5 X 7.4 mm RECTANGULAR SOLID STATE LAMPS ELECTRICAL / OPTICAL CHARACTERISTICS Parameter Luminous Intensity (mcd) Minimum Typical Forward Voltage (V) Maximum Typical Peak Wavelength (nm) Spectral Line Half Width (nm) Reverse Voltage (V) Viewing Angle () 3.0 2.1 45 5 3.0 2.1 45 5 3.0 2.2 35 5 100 3.0 2.2 35 5 100 3.0 2.3 35 5 100 3.0 2.3 IF = 20mA IF = 20mA IR = 100A 35 5 100 1.0 2.5 2.5 5.0 1.5 2.5 3.0 5.0 1.5 2.5 IF = 20mA 3.0 5.0 (TA =25C) YELLOW HLMP- 0400/1 HEG HLMP- 0503/4 Condition IF = 20mA HER HLMP- 0300/1 635 635 585 585 565 565 100 100 www.fairchildsemi.com 2 OF 4 2/27/01 DS300002 2.5 X 7.4 mm RECTANGULAR SOLID STATE LAMPS TYPICAL PERFORMANCE CURVES 90 (TA =25C) 2.5 RELATIVE LUMNOUS INTENSITY (NORMALIZED AT 20 mA) 80 IF - FORWARD CURRENT (mA) 70 60 50 40 30 20 10 GREEN 0 1.0 2.0 3.0 4.0 5.0 YELLOW HER 2.0 HER YELLOW GREEN 1.5 1.0 0.5 0.0 0 5 10 15 20 25 30 VF - FORWARD VOLTAGE (V) IF - DC FORWARD CURRENT (mA) Fig. 1 Forward Current vs. Forward Voltage Fig. 2 Relative Luminous Intensity vs. DC Forward Current 1.0 HER 50 IF - FORWARD CURRENT (mA) GREEN 40 YELLOW HER, GREEN 30 RELATIVE INTENSITY 0.5 20 YELLOW 10 0 0 20 40 60 85 100 0 500 550 600 650 700 750 TA - AMBIENT TEMPERATURE (C) WAVELENGTH (nm) Fig. 3 Current Derating Curve Fig. 4 Relative Intensity vs. Peak Wavelength -20 -30 -10 0 0.9 0.8 0.7 10 20 30 -40 0.6 -50 -60 -70 -80 -90 0.5 0.4 0.3 0.2 0.1 0 OFF AXIS ANGLE DEGREES 40 50 60 70 80 90 Fig. 5 Spatial Distribution DS300002 2/27/01 3 OF 4 www.fairchildsemi.com 2.5 X 7.4 mm RECTANGULAR SOLID STATE LAMPS DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body,or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com 4 OF 4 2/27/01 DS300002 |
Price & Availability of HLMP-0504
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |