View IDT5V927_1253677.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

IDT5V927 QUAD OUTPUT CLOCK GENERATOR
INDUSTRIAL TEMPERATURE RANGE
QUAD OUTPUT CLOCK GENERATOR
IDT5V927
FEATURES:
* * * * * * * *
3V to 3.6V operating voltage 50MHz to 160MHz output frequency range Input from fundamental crystal oscillator or external source Internal PLL feedback (loading feedback output relative to other outputs, adjusts propagation delay between REF inputs and outputs) Select inputs (S[1:0]) for FB divide selection (multiply ratio of 2, 3, 4, 4.25, 5, 6, 6.25, and 8) Low jitter PLL bypass for testing and power-down control (S1 = H, S0 = H, powers part down <500A) Available in TSSOP package
The IDT5V927 is a low-cost, low skew, low jitter, and high-performance clock synthesizer. It has been specially designed to interface with Gigabit Ethernet (125MHz), Fibre Channel (106.25MHz), and OC-3 (155.52MHz) applications. It can be programmed to provide output frequencies ranging from 50MHz to 160MHz, with input frequencies ranging from 6.25MHz to 80MHz. The IDT5V927 includes an internal RC filter that provides excellent jitter characteristics and eliminates the need for external components. When using the optional crystal input, the chip accepts a 10 - 40MHz fundamental mode crystal with a maximum equivalent series resistance of 50.
DESCRIPTION:
APPLICATIONS:
* * * * * * Gigabit ethernet Router Network switches SAN Instrumentation Fibre channel
FUNCTIONAL BLOCK DIAGRAM
OE VCO DIVIDE 1/N
REF
PHASE DETECTOR
CHARGE PUM P
LOO P FILTER
VCO
Q0
Q1 0 Q2 1 Q3 X2 CRYSTAL O SCILLATO R X1
SELECT M O DE
S1
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
S0
INDUSTRIAL TEMPERATURE RANGE
1
c 2003 Integrated Device Technology, Inc.
FEBRUARY 2003
DSC 5853/6
IDT5V927 QUAD OUTPUT CLOCK GENERATOR
INDUSTRIAL TEMPERATURE RANGE
PIN CONFIGURATION
REF X1 X2 VDD Q0 GND Q1 VDDQ 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 S0 S1 OE GND Q3 GND Q2 VDDQ
ABSOLUTE MAXIMUM RATINGS(1)
Symbol VDD/VDDQ VI IO TSTG TJ Description Supply Voltage to Ground Input Voltage Output Current Storage Temperature Junction Temperature Max. - 0.5 to +4.6 - 0.5 to +4.6 50 - 65 to +150 150 Unit V V mA C C
NOTE: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.
PIN DESCRIPTION
Pin Name Type S[1:0] I I OE Description Three level divider/mode select pins. Float to MID. Output enable bar. OE has a pull-down. Output Q[1:3] tristated when HIGH. Output Q0 remains running when in PLL mode and tri-states when in TEST mode. Crystal oscillator input. Connect to GND if oscillator not required. Crystal oscillator output. Leave unconnected for clock input. Input clock. Connect to X2 if crystal oscillator is used. Output at N*REF frequency Output at N*REF internally connected for PLL feedback Power supply for the device outputs. Connect to VDD on PCB. Power supply for the device core and inputs. Connect to VDD on PCB. GND PWR Ground supply
TSSOP TOP VIEW
X1 X2 REF Q[1:3] Q0 VDDQ VDD
I I I O O PWR PWR
CRYSTAL SPECIFICATION
The crystal oscillators should be fundamental mode quartz crystals: overtone crystals are not suitable. Crystal frequency should be specified for parallel resonance with 50 maximum equivalent series resonance. Crystal tuning capacitors should be connected from X2/REF to GND and from X1 to GND.
DIVIDE SELECTION TABLE(1)
S1 L L L M M M H H H S0 L M H L M H L M H Divide-by-N Value 2 3 4 4.25 5 6 6.25 8 TEST Mode PLL PLL PLL PLL PLL PLL PLL PLL TEST (2)
NOTES: 1. H = HIGH M = MEDIUM L = LOW 2. Test mode for low frequency testing. In this mode, REF clock bypasses the VCO (VCO powered down) and the crystal oscillator is powered down.
2
IDT5V927 QUAD OUTPUT CLOCK GENERATOR
INDUSTRIAL TEMPERATURE RANGE
COMMON OUTPUT FREQUENCY EXAMPLES (MHz)
Output Input FB Divide Selection S[1:0] Output Input FB Divide Selection S[1:0] 50 25 LL 106.25 17 HL 60 10 MH 106.25 25 ML 64 16 LH 120 15 HM 72 12 MH 125 20 HL 75 25 LM 125 25 MM 80 10 HM 125 62.5 LL 90 15 MH 150 25 MH 100 20 MM 155.52 19.44 HM
OPERATING CONDITIONS
Symbol VDD/VDDQ TA CL CIN Parameter Power Supply Voltage Operating Temperature Output Load Capacitance Input Capacitance, OE, F = 1MHz, VIN = 0V, TA = 25C Min. 3 - 40 -- -- Typ. 3.3 25 -- 5 Max. 3.6 +85 15 7 Unit V C pF pF
DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE
Following Conditions Apply Unless Otherwise Specified: Industrial: TA = -40C to +85C, VDD/VDDQ = 3.3V 0.3V
Symbol VIL VIH VIHH VIMM VILL IIN I3 IIH VOL VOH Parameter Input LOW Voltage Input HIGH Voltage Input HIGH Voltage Input MID Voltage Input LOW Voltage Input Leakage Current (REF input only) 3-Level Input DC Current, S[1:0] Input HIGH Current Output LOW Voltage Output HIGH Voltage Test Conditions Min. -- 2 VDD - 0.6 VDD/2 - 0.3 -- -5 -- - 50 - 200 -- -- -- 2.4 Typ. -- -- -- -- -- -- -- -- -- -- 2 -- -- Max 0.8 -- -- VDD/2 + 0.3 0.6 +5 +200 +50 -- 100 4 0.4 -- Unit V V V V V A A A mA V V
3-level input only 3-level input only 3-level input only VIN = VDD or GND,VDD = Max. VIN = VDD HIGH Level VIN = VDD/2 MID Level VIN = GND LOW Level VIN = VDD OE VIN = VDD, S[1:0] = HH X1 IOL = 12mA IOH = -12mA
3
IDT5V927 QUAD OUTPUT CLOCK GENERATOR
INDUSTRIAL TEMPERATURE RANGE
POWER SUPPLY CHARACTERISTICS
Symbol IDD_PD Parameter Power Down Current Test Conditions (1) VDD = Max. S[1:0] = HH OE = L; REF = L; X1 = L All outputs unloaded IDD IDD Supply Current per Input Dynamic Supply Current VDD = Max., VIN = 3V VDD = 3.6V S[1:0] = LL OE = L FOUT = 150MHz All outputs unloaded
NOTE: 1. For conditions shown as Min. or Max., use the appropriate values specified under DC Electrical Characteristics.
Min. --
Typ. --
Max 500
Unit A
-- --
-- --
30 130
A mA
AC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE
Symbol tR, tF dT tPD tSK tJ fOUT Parameter Rise Time, Fall Time Output/Duty Cycle REF to Q0(1) Output to Output Skew (Q0 to Q1:3) Cycle - Cycle Jitter Output Frequency 0.8V to 2V VT = VDDQ/2 fOUT 100MHz, all N VT = VDDQ/2 Equal loads fOUT 100MHz 50 < fOUT < 160MHz, N 4 50 < fOUT < 160MHz, N 4.25 Test Conditions Min. -- 45 -200 -200 -350 -- -100 50 Typ. 0.7 50 -- -- -- -- -- -- Max. 1.5 55 200 200 350 200 100 160 ps ps MHz ps Unit ns %
NOTE: 1. When using a clock input.
INPUT TIMING REQUIREMENTS
Symbol tR, tF tPWC DH fOSC fIN Description(1) Maximum input rise and fall time, 0.8V to 2V(2) Input clock pulse, HIGH or LOW(2) Input duty cycle(2) XTAL oscillator frequency Input frequency(2) Min. -- 2 10 -- 50/N Max. 10 -- 90 40 160/N Unit ns/V ns % MHz MHz
NOTES: 1. Where pulse width implied by DH is less than the tPWC limit, tPWC limit applies, 2. When using a clock input.
4
IDT5V927 QUAD OUTPUT CLOCK GENERATOR
INDUSTRIAL TEMPERATURE RANGE
AC TEST LOADS AND WAVEFORMS
VDD
150
OUTPUT
15pF
150
AC Test Load
3V 2V VTH = VDD/2 0.8 0V
1ns
1ns
Input Test Waveform
VDDQ 2V VTH = VDDQ/2 0.8 0V
tR
tF
Output Waveform
5
IDT5V927 QUAD OUTPUT CLOCK GENERATOR
INDUSTRIAL TEMPERATURE RANGE
ORDERING INFORMATION
IDT XXXX Device Type X Package X Package
I PG PGG 5V927
Industrial Temperature Range (-40C to +85C) Thin Shrink Small Outline Package TSSOP - Green Quad Output Clock Generator
CORPORATE HEADQUARTERS 2975 Stender Way Santa Clara, CA 95054
for SALES: 800-345-7015 or 408-727-6116 fax: 408-492-8674 www.idt.com
for Tech Support: logichelp@idt.com (408) 654-6459
6

▲Up To Search▲

Price & Availability of IDT5V927

	To Download IDT5V927 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .