 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| VDE SLIM TYPE POWER RELAY JK-RELAYS FEATURES 21.4 .843 11 .433 15.7 .618 mm inch * Compact & Slim design: 11.0 mm (length) x 21.4 mm (width) x 15.7 mm (height) (.433x.843x.618 inch) * High capacity type (8 A) available * Surge resistance: Min. 8,000 V between contact and coil * High sensitivity: 200 mW nominal operating power * Sealed type available * VDE, TUV, SEMKO also approved SPECIFICATIONS Contact Type Standard type High capacity type 1 Form A Characteristics Max. operating speed Initial insulation resistance*1 Initial Between open contacts breakdown Between contact and coil voltage*2 Surge voltage between contact and coil*3 Operate time*4 (at nominal voltage) Release time*4 (at nominal voltage) (without diode) Temperature rise (ambient temperature: 70C) Shock resistance Functional*5 Destructive*6 Functional*7 Vibration resistance Standard and high capacity type 200 mW Destructive Ambient Conditions for operation, temp. transport and storage*8 (Not freezing and condensing Humidity at low temperature) Unit weight 20 cpm Min. 100 M at 500 V DC 750 Vrms for 1 min. 2,000 Vrms for 1 min. Min. 8,000 V Approx. 4 ms Approx. 2 ms Max. 45C with nominal coil voltage and at maximum allowable contact current Min. 98 m/s2 {10 G} Min. 980 m/s2 {100 G} 10 to 55 Hz at double amplitude of 1.6 mm 10 to 55 Hz at double amplitude of 2 mm -40C to +70C -40F to +158F 5 to 85% R.H. Approx. 7 g .25 oz Arrangement Initial contact resistance, max. 100 m (By voltage drop 6 V DC 1 A) Contact material Silver alloy Nominal switching 3 A 30 V DC 5 A 30 V DC capacity 3 A 125 V AC 8 A 125 V AC Rating 90 W, 150 W, Max. switching power (resistive 500 VA 1,250 V A load) Max. switching voltage 250 V AC, 110 V DC (0.3 A) Max. switching current 3A 8A Mechanical (at 180 cpm) 5x106 Expected life (min. Electrical (at 20 cpm) 105 operations) (at rated load) Coil Nominal operating power Remarks * Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as "Initial breakdown voltage" section *2 Detection current: 10 mA *3 Wave is standard shock voltage of 1.2 x 50s according to JEC-212-1981 *4 Excluding contact bounce time *5 Half-wave pulse of sine wave: 11ms; detection time: 10s *6 Half-wave pulse of sine wave: 6ms *7 Detection time: 10s *8 Refer to 5. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 61). TYPICAL APPLICATIONS * Home appliances Microwave ovens, Air conditioners * Office equipment Photocopiers, Facsimiles * Industrial machines NC machines ORDERING INFORMATION Ex. JK 1a P F Protectiive constructiion Nil: Sealed type F: Flux-resistant type 12 V Coil voltage (DC) 3, 5, 6, 9, 12, 18, 24, 48 V Contact capacity Nil: Standard 3 A P: High capacity 8A Notes: 1. For TV-5 rated type, add sufix "-TV". 1. For detailed specifications, please consult us. 2. Standard packing: Carton: 100 pcs.; Case: 500 pcs. UL/CSA, VDE approved type is standard. 292 JK TYPES 1. Standard type (3 A) Coil voltage, V DC 3 5 6 9 12 18 24 48 Sealed type JK1a-3V JK1a-5V JK1a-6V JK1a-9V JK1a-12V JK1a-18V JK1a-24V JK1a-48V Part No. Flux-resistant type JK1aF-3V JK1aF-5V JK1aF-6V JK1aF-9V JK1aF-12V JK1aF-18V JK1aF-24V JK1aF-48V 2. High capacity type (8 A) Coil voltage, V DC 3 5 6 9 12 18 24 48 Sealed type JK1aP-3V JK1aP-5V JK1aP-6V JK1aP-9V JK1aP-12V JK1aP-18V JK1aP-24V JK1aP-48V Part No. Flux-resistant type JK1aPF-3V JK1aPF-5V JK1aPF-6V JK1APF-9V JK1aPF-12V JK1aPF-18V JK1aPF-24V JK1aPF-48V COIL DATA (at 20C 68F) Nominal voltage, V DC 3 5 6 9 12 18 24 48 Pick-up voltage V DC (max.) 2.4 4.0 4.8 7.2 9.6 14.4 19.2 38.4 Drop-out voltage, V DC (min.) 0.15 0.25 0.3 0.45 0.6 0.9 1.2 2.4 Coil resistance (10%) 45 125 180 405 720 1,620 2,880 11,520 Nominal operating current, mA (10%) 67 40 33 22 17 11 8.3 4.2 Nominal operating power, mW 200 200 200 200 200 200 200 200 Max. allowable voltage at 70C, V DC 3.9 6.5 7.8 11.7 15.6 23.4 31.2 62.4 mm inch PC board pattern (Copper-side view) 21.4 .843 11 .433 2-1.3 dia. 2-.051 dia. 2-0.9 dia. 2-.035 dia. DIMENSIONS 15.4 .606 0.3 .012 4 .157 2.54 .100 15.24 .600 1.6 .063 7.62 .300 Tolerance: 0.1 .004 N.O. COM 2 1 Dimension: Max. 1mm .039 inch 1 to 5mm .039 to .197 inch Min. 5mm .197 inch General tolerance 0.2 .008 0.3 .012 0.4 .016 REFERENCE DATA 1-(1). Maximum value for switching capacity (Standard type) 100 1-(2). Maximum value for switching capacity (High capacity type) 100 2. Operate/release time Operate/release time, ms Contact current, A Contact current, A 8 10 3 1 AC resistive load 10 8 AC resistive load 6 Operate time 4 Max. - x Max. - Min. x Min. 1 2 Release time 10 100 250 Contact voltage, V 10 100 250 0 80 100 120 140 160 180 Contact voltage, V Coil applied voltage, %V 293 JK 3. Coil temperature rise (High capacity type) Measured portion: Inside the coil Contact current: 8 A 4. Ambient temperature characteristics (High capacity type) Contact current: 8 A 300 Temperature rise, deg. 80 Ambient temperature 25C Ambient temperature 70C Voltage, %V Allowable ambient temperatures against % coil voltage (max. inside the coil temperature set as 115C 239F) 200 60 40 Pick-up voltage with a hot-start condition of 100%V on the coil 100 Pick-up voltage 20 0 80 100 120 140 160 180 0 20 40 60 80 Coil applied voltage, %V Ambient temperature, C 5.-(1) Life curve (Standard type) Operation frequency: 20 times/min. (ON/OFF = 1.5s:1.5s) Ambient temperature: Room temperature 100 5.-(2) Life curve (High capacity type) Operation frequency: 20 times/min. (ON/OFF = 1.5s:1.5s) Ambient temperature: Room temperature 100 Life, x104 Life, x104 10 125V AC resistive load 250V AC resistive load 125V AC resistive load 10 250V AC resistive load 1 1 0 1 2 3 4 2 3 4 5 6 7 8 9 Contact current, A Contact current, A For Cautions for Use, see Relay Technical Information (Page 48 to 76). 294 9/1/2000 All Rights Reserved, (c) Copyright Matsushita Electric Works, Ltd. Go To Online Catalog |
Price & Availability of JK1APF-9V
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |