View LH1532FPTR_1264536.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

VISHAY
LH1532FP/ FPTR
Vishay Semiconductors
Dual 1 Form A Solid State Relay
Features
* Solid-state Relay (Equivalent to AQW210S) - Typical RON 20 - Load Voltage 350 V - Load Current 120 mA - Current Limit Protection - High Surge Capability - Clean Bounce Free Switching - Low Power Consumption - High Reliability Monolithic Receptor * Two Independent Relays in a Single Package * Package - FLAT PAK * Isolation Test Voltage 3000 VRMS * Lead-free component * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC
S1 8
S1' S2 76
S2' 5
1
18838
2
3
4
e3
Pb
Pb-free
Agency Approvals
* UL1577, File No. E52744 System Code L
Description Applications
General Telecom Switching - On/off Hook Control - Ring Relay - Ground Start Industrial Controls - Triac Predriver - Output Modules Peripherals - Transducer Driver Instrumentation - Automatic Tuning/Balancing - Flying Capacitor - Analog Multiplexing See "Solid State Relay" (Application Note 56) The LH1532FP is a Dual 1 Form A (SPST) which can replace electromechanical relays in many applications. They are constructed using a GaAlAs LED for activation control and an integrated monolithic die for the switch output. The die is comprised of a photodiode array, switch control circuity and MOSFET switches. The SSR features low ON-resistance, high breakdown voltage and current-limit circuitry that protects the relay from telephone line induced lightning surges.
Order Information
Part LH1532FP LH1532FPTR Remarks Tubes, SMD-8 Tape and Reel, SMD-8
Document Number 83830 Rev. 1.3, 26-Oct-04
www.vishay.com 1
LH1532FP/ FPTR
Vishay Semiconductors Absolute Maximum Ratings, Tamb = 25 C
Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute Maximum Ratings for extended periods of time can adversely affect reliability.
SSR
Parameter LED continuous forward current LED reverse voltage DC or peak AC load voltage Continuous DC load current Ambient temperature range Storage temperature range Soldering temperature Isolation test voltage Isolation resistance t = 10 s max. t = 1.0 s VIO = 500 V, Tamb = 25 C VIO = 500 V, Tamb = 100 C Total power dissipation IR 10 A IL 50 A Test condition Symbol IF VR VL IL Tamb Tstg Tsld VISO RIO RIO Ptot Value 50 6.0 350 120 - 40 to + 85 - 40 to + 125 260 3000 10
12
Unit mA V V mA C C C VRMS mW
1011 600
Electrical Characteristics, Tamb = 25 C
Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements.
SSR
Parameter LED forward current for switch turn-on LED forward current for switch turn-off LED forward voltage ON-Resistance OFF-Resistance Current limit Test condition IL = 100 mA, t = 10 ms VL = 300 V IF = 10 mA IF = 5.0 mA, IL = 50 mA IF = 0 mA, VL = 100 V IF = 5.0 mA, t = 5.0 ms IF = 0 mA, VL = 350 V Output capacitance Pole-to-pole capacitance (S1 to S2) Turn-on time Turn-off time Switch offset IF = 0 mA, VL = 1.0 V IF = 5.0 mA IF = 5.0 mA, IL = 50 mA IF = 5.0 mA, IL = 50 mA IF = 5.0 mA ton toff VOS Symbol IFon IFoff VF RON ROFF ILimit IO IO CO 55 0.5 1.1 0.06 0.15 2.5 2.5 170 0.2 1.0 1.22 20 5000 210 0.6 250 200 1.0 1.5 25 Min Typ. 1.2 Max 3.0 Unit mA mA V G mA nA A pF pF ms ms V
Output off-state leakage current IF = 0 mA, VL = 100 V
www.vishay.com 2
Document Number 83830 Rev. 1.3, 26-Oct-04
LH1532FP/ FPTR
Vishay Semiconductors Typical Characteristics (Tamb = 25 C unless otherwise specified)
Change in Breakdown Voltage (%) Normalized to 25 C
100
LED Forward Current for Switch Turn-on (%), Normalized to 25 C
8 IL = 100 mA 6 4 2 0 -2 -4 -6 -8 -40
ilh1532fp_04
80 60 40 20 0 -20 -40 -60 -40
-20
0
20
40
60
80
-20
0
20
40
60
80
ilh1532fp_01
Ambient Temperature (C)
Ambient Temperature (C)
Figure 1. LED Current for Switch Turn-on vs. Temperature
Figure 4. Switch Breakdown Voltage vs. Temperature
40 30
Change in RON (%)
80 IF = 5.0 mA IL = 50 mA
Capacitance (pF)
70 60 50 40 30 20 10 0
20 10 0 -10 -20 -30 -40 -40 -20 0 20 40 60 80
0
ilh1532fp_05
20
40
60
80
100
ilh1532fp_02
Ambient Temperature (C)
Applied Voltage (V)
Figure 2. ON-Resistance vs. Temperature
Figure 5. Switch Capacitance vs. Applied Voltage
40
Change in Current Limit (%) Normalized to 25 C Off-State Leakage Current ( nA )
30 20 10 0 -10 -20 -30 -40 -40 -20 0 20
IF = 5.0 mA t = 5.0 ms VL = SEE ELEC. CHAR.
80 70 60 50 40 30 20 10 0 T = 25 C
40
60
80
17321
0
100
200 Load Voltage ( V )
300
400
ilh1532fp_03
Ambient Temperature (C)
Figure 3. Current Limit vs. Temperature
Figure 6. Leakage Current vs. Applied Voltage
Document Number 83830 Rev. 1.3, 26-Oct-04
www.vishay.com 3
LH1532FP/ FPTR
Vishay Semiconductors
140
Off-State Leakage Current ( nA )
120 100 80 60 40 20 0 0 100 T = 50 C T = 75 C T = 85 C
17322
200 Load Voltage ( V )
300
400
Figure 7. Leakage Current vs. Applied Voltage at Elevated Temperatures
80 60
Change in Toff (%) Normalized to 25 C
IF = 10 mA IF = 8.0 mA IF = 6.0 mA
40 20 0 -20 -40 -60 -80 -40 -20
IF = 5.0 mA IF = 4.0 mA IF = 3.0 mA IF = 2.0 mA
0
20
40
60
80
ilh1532fp_08
Ambient Temperature (C)
Figure 8. Turn-off Time vs. Temperature
7 6 5
Ton (ms)
4 3 2 1 0 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) T = 85 C T = 25 C T = -40 C
ilh1532fp_09
Figure 9. Turn-on Time vs. LED Current
www.vishay.com 4
Document Number 83830 Rev. 1.3, 26-Oct-04
LH1532FP/ FPTR
Vishay Semiconductors Package Dimensions in Inches (mm)
.029 (.74) pin one ID .180 (4.57) ISO Method A
Detail A (not to scale)
) 13 (2. ) 4 1 .08 6 (.4 .01
.020 (.51) .374 typ. (9.50) See Detail A .000-.004 (.000-.102) .080 (2.03) .016 (.41) .100 (2.54) Lead coplarity .004 (.10) max. .216 (5.48) .010 (.25) .274 (6.96) .015 (.39) .010 typ. (.25)
40
.020 (.50) 3-7
i178024
Document Number 83830 Rev. 1.3, 26-Oct-04
www.vishay.com 5
LH1532FP/ FPTR
Vishay Semiconductors Ozone Depleting Substances Policy Statement
It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances.
We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423
www.vishay.com 6
Document Number 83830 Rev. 1.3, 26-Oct-04
Legal Disclaimer Notice
Vishay
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale.
Document Number: 91000 Revision: 08-Apr-05
www.vishay.com 1

▲Up To Search▲

Price & Availability of LH1532FPTR

	To Download LH1532FPTR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .