View LO5SMTPG4-B0G-A2_1266701.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Cree(R) 5-mm Oval LED
Model # LO5SMTPG4-B0G-A2 Data Sheet
110-degree oval LED lamp in green color with tinted, diffused lens and stopper
Applications
* Full-Color Display
Absolute Maximum Ratings (TA = 25C)
Items Forward Current Peak Forward Current Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Lead Soldering Temperature
Note
Symbol IF IFP VR PD Topr Tstg Tsol
Absolute Maximum Rating 25 100 5 100 -40 ~ +95 -40 ~ +100
Unit mA mA V mW C C
Max. 260C for 3 sec. max. (3 mm from the base of the epoxy bulb)
Note: Pulse width 0.1 msec, duty 1/10.
Typical Electrical & Optical Characteristics (TA = 25C)
Characteristics Forward Voltage Reverse Current Dominant Wavelength Luminous Intensity 50% Power Angle 2 2 Symbol VF IR
D
Condition IF = 20 mA VR = 5 V IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA
Unit V A nm mcd deg deg
Minimum
Typical 3.4
Maximum 4.0 100
520 1100
527 1750 110 50
535
IV 1/2H-H 1/2V-V
D-CT111.000 Data Sheet: CL
Subject to change without notice. www.cree.com/ledlamps
Standard Bins for LO5SMTPG4-B0G-A2 (IF = 20 mA)
Lamps are sorted to luminous intensity (IV) and dominant wavelength (
D
) bins shown.
Orders for LO5SMTPG4-B0G-A2 may be filled with any or all bins contained as below. All luminous intensity (IV) and dominant wavelength (
D
) values shown and specified are at IF = 20 mA.
X7
X8
X9 W or above
Luminous Intensity (IV)
3000 mcd V 2130 mcd U 1520 mcd T 1100 mcd 520 nm 525 nm 530 nm
D
535 nm )
Dominant Wavelength (
Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Pb content <1000 ppm. 3. Tolerance of measurement of luminous intensity is 15%. 4. Tolerance of measurement of dominant wavelength is 1 nm. 5. Tolerance of measurement of VF is 0.05 V. 6. Packaging methods are available for selection; please refer to the "Cree LED Lamp Packaging Standard" document. 7. Please refer to the "Cree LED Lamp Reliability Test Standards" document for reliability test conditions. 8. Please refer to the "Cree LED Lamp Soldering & Handling" document for information about how to use this LED product safely.
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
2
CLD-CT.000
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Document No. SPE/LO5SMTPG4-B0G-A2 Rev. No. 01
Graphs
Graphs
100.0 80.0 60.0 40.0 20.0 0.0 3.0 3.4 3.8 4.2 4.6 5.0 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. Vf(V)
Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE.
If (mA)
-50 Vr(V)
-40
-30
-20
-10
0 0.0 -10.0 -20.0 -30.0 -40.0 -50.0
Half Power WL=38nm Domi WL= 525nm
5.0 4.0 3.0 2.0 1.0 0.0 0.0 If(mA) 20.0 40.0 60.0 80.0 100.0
I (RELATIVE LUMINOUS INTENSITY) 100% 75% 50% 25% 0% 300 400 500 600 700 WL(nm) 800
FIG.3 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT.
FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH.
50% Power Angle : 50 40 30 20 10 0 Ta( C) 0.0 20.0 40.0 60.0 80.0 100.0
-90 -60 -30 0 30
IF(mA) H-H V-V
0
H-H : 110 V-V : 50 Ie(%)
100%
80%
60%
40%
20%
60
90
0%
FIG.5 MAXIMUM FORWARD DC CURRENT VS AMBIENT TEMPERATURE (Tjmax=105 C)
FIG.6 FAR FIELD PATTERN
Items Prepared by Checked by Approved by ECN#
Signatures
LiuZM MaJF David
Date
2005-02-24 2005-02-24 2005-02-24 Rev. No Date
Revision History
Change Description
ECN-H20050055
Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 Cotco International Ltd.
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
CLD-CT.000
4/4
Format #: COTCO-D-074
REV.4
Mechanical Dimensions
Document No. SPE/LO5SMTPG4-B0G-A2 01 All dimensions are in mm. ToleranceRev. No. unless otherwise noted. is 0.25 mm
An epoxy meniscus may extend about 1.5 mm down the leads. Burr around bottom of epoxy may be 0.5 mm max.
Dimension Drawing
maximum ating 25 00 5 00 ~ +95 ~ +100
Unit mA mA V mW C C
0C for 3 sec Max.
Notes e base of the epoxy bulb)
RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU DirecTa =2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment tive 25C) (RoHS), as amended through April 21, 2006. Vision Advisory Claim
cs (
Conditionshould be cautioned not to stare at the light of this LEDMax. The bright Unitcan damage the eye. Min. Typ. Users product. light IF = 20mA IF = 1.0 4 --1.7 CLD-CT.000 3.4 --4.0 2.5 V V
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Kit Number System
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the "Cree LED Lamp Packaging Standard" document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner:
Standard/Custom
0: Standard C: Custom
VF
0: Full forward voltage distribution 1~9, A~Z . . . : special request *
Wd/Color aaaaaaaaa-aaa-aa- x x x x x IV
1: Full-color distribution 2~9, A~Z . . . : special request * 0: Full luminous intensity distribution 1~9, A~Z . . . : special request *
Packing type Product P/N
0: Standard = Bulk pack 1~9, A~Z . . . : special request *
* Contact your Cree sales representative for ordering information.
Standard Available Kits*
Kit Number Contact Cree Sales Description 5mm Oval 110 Pure Green 527nm, Bulk Pack
* Please contact your Cree representative about the availability of non-standard kits.
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
5
CLD-CT.000
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps

▲Up To Search▲

Price & Availability of LO5SMTPG4-B0G-A2

	To Download LO5SMTPG4-B0G-A2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .