|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Cree(R) P4 LED Model # LP378PWR-C0G Data Sheet 120-degree, 7.6 x 7.6 mm LED lamp in warm white color with water-transparent lens and stopper Applications * * Indicators Illuminations Absolute Maximum Ratings (TA = 25C) Items Forward Current Peak Forward Current Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Lead Soldering Temperature Note Symbol IF IFP VR PD Topr Tstg Tsol Absolute Maximum Rating 30 100 5 132 -40 ~ +95 -40 ~ +100 Unit mA mA V mW C C Max. 260C for 3 sec. max. (3 mm from the base of the epoxy bulb) Note: Pulse width 0.1 msec, duty 1/10. Typical Electrical & Optical Characteristics (TA = 25C) Characteristics Forward Voltage Reverse Current Luminous Intensity Chromaticity Coordinates Color Temperature 50% Power Angle Symbol VF IR IV x y CCT 21/2H-H Condition IF = 30 mA VR = 5 V IF = 30 mA IF = 30 mA IF = 30 mA IF = 30 mA IF = 30 mA K deg Unit V A mcd 200 320 0.426 0.393 3000 130 Minimum Typical 3.6 Maximum 4.4 100 D-CT127.000 Data Sheet: CL Subject to change without notice. www.cree.com/ledlamps Standard Bins for LP378PWR-C0G (IF = 30 mA) Lamps are sorted to luminous intensity (IV), VF and chromaticity coordinates (x,y) bins shown. Orders for LP378PWR1-C0G may be filled with any or all bins contained as below. All luminous intensity (IV), VF and chromaticity coordinates (x,y) values shown and specified are at IF = 30 mA. D E F R or above Q Luminous Intensity (IV) 550 mcd 390 mcd P 280 mcd N 200 mcd Chromaticity Coordinates (x,y) Rank Chromaticity x Coordinates y 0.3541 0.3401 0.3610 0.3900 D 0.4030 0.4250 0.3822 0.3580 0.3822 0.3580 0.4030 0.4250 E 0.4490 0.4530 0.4129 0.3725 0.4129 0.3725 0.4490 0.4530 F 0.5080 0.4720 0.4588 0.3838 Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Pb content <1000 ppm. 3. Tolerance of measurement of luminous intensity is 15%. 4. Tolerance of measurement of the chromaticity coordinates is 0.01. 5. Tolerance of measurement of VF is 0.05 V. 6. Packaging methods are available for selection; please refer to the "Cree LED Lamp Packaging Standard" document. 7. Please refer to the "Cree LED Lamp Reliability Test Standards" document for reliability test conditions. 8. Please refer to the "Cree LED Lamp Soldering & Handling" document for information about how to use this LED product safely. Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 2 CLD-CT27.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps CIE Chromaticity Diagram CIE Chromaticity Diagram 0.90 CIE 520 0.80 530 510 540 550 560 0.70 0.60 490 0.50 570 580 590 600 610 620 630 Y 0.40 E D F 0.30 480 0.20 470 0.10 460 0.00 0.00 0.10 0.20 0.30 X 0.40 0.50 0.60 0.70 0.80 4/5 Format #: COTCO-D-074 REV.4 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 3 CLD-CT27.000 Graphs Document No. SPE/LP378PWR1-C0G Rev. No. 03 Graphs Items Prepared by Checked by Approved by FCN# Signatures LiuZM HuangJD David Date 2007-04-26 2007-04-26 2007-04-26 Rev. No 02 03 Date Revision History Change Description 2006-04-06 Release. 2007-04-26 Change tolerance of CIE(x,y) from +/-0.015 to +/-0.01 FCN20070432 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 Cotco International Ltd. Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 4 CLD-CT27.000 Mechanical Dimensions All dimensions are in mm. Tolerance is 0.25 mm unless otherwise noted. An epoxy meniscus may extend about 1.5 mm down the leads. Burr around bottom of epoxy may sion mm max. g Dimen be 0.5 Drawin Document No. SPE/LP378PWR1-C0G Rev. No. 03 maximum ting 0 00 5 32 +95 +100 Unit mA mA V mW C C Notes C for 3 sec Max. e base of the epoxy bulb) RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 25 Ta = 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment ) (RoHS), as amended through April 21, 2006. s( C Vision Advisory Claim Users at the Condition should be cautioned not to stare Typ. light of this LED product. The bright light can damage the eye. Min. Max. Unit F = 30mA --CLD-CT27.000 3.6 --- 4.4 100 V A VR = 5V 5 Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. --- Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the "Cree LED Lamp Packaging Standard" document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color aaaaaaaaa-aaa-aa- x x x x x IV 1: Full-color distribution 2~9, A~Z . . . : special request * 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * Packing type Product P/N 0: Standard = tube pack 1~9, A~Z . . . : special request * * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number LP377PWN1-90G-00002 Description P4 90 White, A1, A2, B1, B2, Tube Pack * Please contact your Cree representative about the availability of non-standard kits. Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT27.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps |
Price & Availability of LP378PWR1-C0G |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |