View M57182N-315_1270022.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HYBRID IC
M57182N-315
UNINSULATED DC-DC CONVERTER
DESCRIPTION
M57182N-315 is an un-insulated type DC-DC converter with that voltages obtained from rectifying 200VAC can be directly inputted. This hybrid IC gives +15V, 200mA with several external components such as electrolytic capacitors and choke coil.
OUTLINE DRAWING
Dimensions: mm
35.0 MAX
FEATURES
*Input voltage rage *********************************** DC 220V ~ 380V *Output specifications******************************* 15V, 200mA
1
M57182N-315 XXXX
12
4.5+/-1.5
20.0 MAX
APPLICATIONS
DIP-IPM driving power supply using for electric household appliances and so on.
3.5 MAX
0.35+/-0.2 3.8 MAX 8.5 MAX 5 MAX
2.54
0.55+/-0.1
2.54 x 11 = 27.94
3.5 MAX
BLOCK DIAGRAM
L 8 1 Vin
L 10
Current detector
12
Vo
Base driver Voltage detector
3 NC
6
COMMON
HYBRID IC
M57182N-315
UNINSULATED DC-DC CONVERTER
MAXIMUM RATINGS (unless otherwise noted, Ta=25C)
Symbol Vin IL Topr Tstg Parameter Input voltage Load current Operating temperature Storage temperature No condensation allowable No condensation allowable Conditions Ratings 450 200 -10 ~ +70 -20 ~ +85 Unit V mA C C
ELECTRICAL CHARACTERISTICS (Unless otherwise noted, Ta=25C, Vin=280V)
Symbol Vin Vo Reg-I Reg-L Parameter Input voltage Output voltage Input regulation Load regulation Efficiency Conditions Recommended range IL = 0 ~ 200mA IL=200mA, VI=220 ~ 380V IL=0 ~ 200mA IL=200mA Limits Min 220 14 Typ 280 15 70 Max 380 16 200 200 Unit V V mV mV %
MEASUREMENT CIRCUIT
1mH
8
10
1
12 M57182N-315 220F 50V 6
A
Vin
10F 450V
+
3
+
V
(*) Please use power inductors with good performance of DC superimposition. (We used C13 - FR -102: made in MITSUMI ELECTRIC CO., LTD.) (**) Please use electrolytic capacitor of output side with high frequency and low impedance.
2
HYBRID IC
M57182N-315
UNINSULATED DC-DC CONVERTER
TYPICAL CHARACTERISTICS
OUTPUT VOLTAGE VS. INPUT VOLTAGE CHARACTERISTICS 18.0 OUTPUT VOLTAGE Vo(V) OUTPUT VOLTAGE Vo(V) 17.0 16.0 15.0 14.0 13.0 12.0 200 250 300 350 400 INPUT VOLTAGE Vi(V) OUTPUT VOLTAGE VS. INPUT VOLTAGE CHARACTERISTICS 18 16 OUTPUT VOLTAGE(V) INPUT CURRENT(mA) 14 12 10 8 6 4 2 0 0 50 100 150 200 INPUT VOLTAGE(V) 0 0 50 100 150 200 INPUT VOLTAGE(V) 40 50 18 16 14 12 10 8 6 4 2 0 0 100 200 300 400 LOAD CURRENT IL(mA) INPUT CURRENT VS. INPUT VOLTAGE CHARACTERISTICS
OUTPUT VOLTAGE VS. LOAD CURRENT CHARACTERISTICS
IL=200mA
Vi=280V
RL=75
RL=75
30 20 10
EFFICIENCY VS. LOAD CURRENT CHARACTERISTICS 100 90 80 EFFICIENCY(%) 70 60 50 40 30 20 10 0 0 50 100 150 200 LOADCURRENT(mA) 0 -10 LOAD CURRENT(mA) 200 150 100 50 250
DERATING CHARACTERISTICS
Vi=280V
10
30
50
70
90
AMBIENT TEMPERATURE(C)
3
HYBRID IC
M57182N-315
UNINSULATED DC-DC CONVERTER FOR SAFETY USING Great detail and careful attention are given to the production activity of Hics, such as the development, the quality of production, and in it's reliability. However the reliability of Hics depends not only on their own factors but also in their condition of usage. When handling Hics, please note the following cautions. CAUTIONS
Packing
The materials used in packing Hics can only withstand normal external conditions. When exposed to outside shocks, rain and certain environmental contaminators, the packing materials will deteriorates. Please take care in handling.
Carrying
1) 2) 3) 4) 5)
Don't stack boxes too high. Avoid placing heavy materials on boxes. Boxes must be positioned correctly during transportation to avoid breakage. Don't throw or drop boxes. Keep boxes dry. Avoid rain or snow. Minimal vibration and shock during transportation is desirable.
Storage
When storing Hics, please observe the following notices or possible deterioration of their electrical characteristics, risk of solderability, and external damage may occur. 1) Devices must be stored where fluctuation of temperature and humidity is minimal, and must not be exposed to direct sunlight. Store at the normal temperature of 5 to 30 degrees Celsius with humidity at 40 to 60%. 2) 3) 4) Avoid locations where corrosive gasses are generated or where much dust accumulates. Storage cases must be static proof. Avoid putting weight on boxes.
Extended storage
When extended storage is necessary, Hics must be kept non-processed. When using Hics which have been stored for more than one year or under severe conditions, be sure to check that the exterior is free from flaw and other damages.
Maximum ratings
To prevent any electrical damages, use Hics within the maximum ratings. current, voltage, etc. must not exceed these conditions.
The temperaqture,
Polarity
To protect Hics from destruction and deterioration due to wrong insertion, make sure of polarity in inserting leads into the board holes, conforming to the external view for the terminal arrangement.
4
HYBRID IC
M57182N-315
UNINSULATED DC-DC CONVERTER
Marketing division, Marketing plannning department 6-41 Tsukuba, Isahaya, Nagasaki, 854-0065 Japan
Keep safety first in your circuit designs! - ISAHAYA Electronics Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (1)placement of substitutive, auxiliary circuits, (2)use of non-flammable material or (3)prevention against any malfunction or mishap. Notes regarding these materials - These materials are intended as a reference to assist our customers in the selection of the ISAHAYA products best suited to the customer's application; they don't convey any license under any intellectual property rights, or any other rights, belonging ISAHAYA or a third party. - ISAHAYA Electronics Corporation assumes no responsibility for any damage, or infringement of any third party's rights, originating in the use of any product data, diagrams, charts or circuit application examples contained in these materials. - All information contained in these materials, including product data, diagrams and charts, represent information on products at the time of publication of these materials, and are subject to change by ISAHAYA Electronics Coporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact ISAHAYA Electronics Corporation or an authorized ISAHAYA products distributor for the latest product infomation before purchasing product listed herein. - ISAHAYA Electronics Corporation products are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact ISAHAYA electronics corporation or an authorized ISAHAYA products distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. - The prior written approval of ISAHAYA Electronics Corporation is necessary to reprint or reproduce in whole or in part these materials. - If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a lisence from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. - Please contact ISAHAYA Electronics Corporation or an authorized ISAHAYA products distributor for further details on these materials or the products contained therein.
5
Nov.2002

▲Up To Search▲

Price & Availability of M57182N-315

	To Download M57182N-315 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .