![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Freescale Semiconductor Technical Data Document Number: MMG3005NT1 Rev. 1, 11/2005 Heterojunction Bipolar Transistor Technology (InGaP HBT) Broadband High Linearity Amplifier The MMG3005NT1 is a General Purpose Amplifier that is internally prematched and designed for a broad range of Class A, small -signal, high linearity, general purpose applications. It is suitable for applications with frequencies from 800 to 2200 MHz such as Cellular, PCS, WLL, PHS, VHF, UHF, UMTS and general small -signal RF. Features * Frequency: 800 -2200 MHz * P1dB: 30 dBm @ 2140 MHz * Small-Signal Gain: 15 dB @ 2140 MHz * Third Order Output Intercept Point: 47 dBm @ 2140 MHz * Single 5 Volt Supply * Internally Prematched to 50 Ohms * Pb -Free Leads. RoHS Compliant. * In Tape and Reel. T1 Suffix = 1000 Units per 12 mm, 7 inch Reel. MMG3005NT1 800 -2200 MHz, 15 dB 30 dBm InGaP HBT CASE 1543-02 PQFN 5x5 PLASTIC Table 1. Typical Performance (1) Characteristic Small-Signal Gain (S21) Input Return Loss (S11) Output Return Loss (S22) Power Output @1dB Compression Third Order Output Intercept Point Symbol Gp IRL ORL P1db IP3 900 MHz 18.5 -14 -12 30 47 1960 MHz 15.5 -10 -7 30 47 2140 MHz 15 -11 -7 30 47 Unit dB dB dB dBm dBm Table 2. Maximum Ratings Rating Supply Voltage (2) Supply Current (2) RF Input Power Storage Temperature Range Junction Temperature (3) Symbol VDC IDC Pin Tstg TJ Value 6 600 18 -65 to +150 150 Unit V mA dBm C C 2. Continuous voltage and current applied to device. 3. For reliable operation, the junction temperature should not exceed 150C. 1. VDC = 5 Vdc, TC = 25C, 50 ohm system Table 3. Thermal Characteristics (VDC = 5 Vdc, IDC = 480 mA, TC = 25C) Characteristic Thermal Resistance, Junction to Case Symbol RJC Value (4) 21.5 Unit C/W 4. Refer to AN1955, Thermal Measurement Methodology of RF Power Amplifiers. Go to http://www.freescale.com/rf. Select Documentation/Application Notes - AN1955. Freescale Semiconductor, Inc., 2005. All rights reserved. MMG3005NT1 1 RF Device Data Freescale Semiconductor Table 4. Electrical Characteristics (VDC = 5 Vdc, 2140 MHz, TC = 25C, 50 ohm system, in Freescale Application Circuit) Characteristic Small-Signal Gain (S21) Input Return Loss (S11) Output Return Loss (S22) Power Output @ 1dB Compression Third Order Output Intercept Point Noise Figure Supply Current (1) Supply Voltage (1) 1. For reliable operation, the junction temperature should not exceed 150C. Symbol Gp IRL ORL P1dB IP3 NF IDC VDC Min 14 -- -- -- -- -- 455 -- Typ 15 -11 -7 30 47 5 480 5 Max -- -- -- -- -- -- 520 -- Unit dB dB dB dBm dBm dB mA V MMG3005NT1 2 RF Device Data Freescale Semiconductor Table 5. Functional Pin Description Name RFin RFOUT/ VCC VCC VBA GND Pin Number 3, 4 10, 11, 12 14 16 Backside Center Metal Description VBA RF input for the power amplifier. This pin is DC-coupled and requires a DC-blocking series capacitor. RF output for the power amplifier. This pin is DC-coupled and requires a DC-blocking series capacitor. Collector voltage supply. Bias voltage supply. The center metal base of the PQFN package provides both DC and RF ground as well as heat sink contact for the power amplifier. RFin RFin 1 2 3 4 5 6 7 8 16 15 VCC 14 13 12 11 10 9 RFout RFout RFout (Top View) Figure 1. Pin Connections Table 6. ESD Protection Characteristics Test Methodology Human Body Model (per JESD 22-A114) Machine Model (per EIA/JESD 22-A115) Charge Device Model (per JESD 22-C101) Class 1A (Minimum) A (Minimum) IV (Minimum) Table 7. Moisture Sensitivity Level Test Methodology Per JESD 22-A113, IPC/JEDEC J-STD-020 Rating 3 Package Peak Temperature 260 Unit C MMG3005NT1 RF Device Data Freescale Semiconductor 3 50 OHM TYPICAL CHARACTERISTICS 600 ICC, COLLECTOR CURRENT (mA) 106 480 MTTF (YEARS) VCC = 5 Vdc 0 0 1 2 3 4 5 VBA, BIAS VOLTAGE (V) 103 120 125 130 135 140 145 150 TJ, JUNCTION TEMPERATURE (C) NOTE: The MTTF is calculated with VDC = 5 Vdc, IDC = 480 mA 105 360 240 104 120 Figure 2. Collector Current versus Bias Voltage Figure 3. MTTF versus Junction Temperature MMG3005NT1 4 RF Device Data Freescale Semiconductor 50 OHM APPLICATION CIRCUIT: 900 MHz VSUPPLY R2 R1 C3 C4 1 16 15 14 13 12 Z4 3 11 DUT 6 7 8 10 9 Z5 L1 C5 C6 RF INPUT 2 Z1 C1 Z2 Z3 C7 Current Mirror Z6 C8 C2 Z7 RF OUTPUT 4 5 Z1, Z7 Z2, Z6 Z3 0.140 x 0.028 Microstrip 0.057 x 0.028 Microstrip 0.342 x 0.028 Microstrip Z4 Z5 PCB 0.119 x 0.028 Microstrip 0.223 x 0.028 Microstrip Isola FR408, 0.014, r = 3.7 Figure 4. 50 Ohm Test Circuit Schematic Table 8. 50 Ohm Test Circuit Component Designations and Values Part C1, C2 C3, C5 C4, C6 C7 C8 L1 R1 R2 Description 15 pF Chip Capacitors 0.01 F Chip Capacitors 0.1 F Chip Capacitors 6.8 pF Chip Capacitor 5.6 pF Chip Capacitor 15 nH Chip Inductor 33 W Chip Resistor 0 W Chip Resistor Part Number ECUV1H150JCV 0603A103JAT2A 0603A102JAT2A 06035J6R8BBT 06035J5R6BBT 1008CS-150XJB Manufacturer Panasonic AVX AVX AVX AVX Coilcraft MMG3005NT1 RF Device Data Freescale Semiconductor 5 50 OHM APPLICATION CIRCUIT: 900 MHz Vp VCC R2 R1 C3 C4 RFin C5 C6 L1 RFout C1 C7 C8 C2 MMG3004/5/6 Rev 3 Figure 5. 50 Ohm Test Circuit Component Layout MMG3005NT1 6 RF Device Data Freescale Semiconductor 50 OHM TYPICAL CHARACTERISTICS: 900 MHz 20 Gp, SMALL-SIGNAL GAIN (dB) -10 19 IRL, INPUT RETURN LOSS (dB) TC = -40C -11 18 85C 25C -12 85C -13 25C -14 VDC = 5 Vdc TC = -40C 17 16 VDC = 5 Vdc 15 840 870 900 f, FREQUENCY (MHz) 930 960 -15 840 870 900 f, FREQUENCY (MHz) 930 960 Figure 6. Small -Signal Gain (S21) versus Frequency Figure 7. Input Return Loss (S11) versus Frequency -5 P1dB, 1 dB COMPRESSION POINT (dBm) ORL, OUTPUT RETURN LOSS (dB) 32 -7 31 TC = -40C 30 85C 29 VDC = 5 Vdc 28 840 870 900 f, FREQUENCY (MHz) 930 960 25C -9 TC = -40C -11 -13 VDC = 5 Vdc -15 840 870 900 85C 25C 930 960 f, FREQUENCY (MHz) Figure 8. Output Return Loss (S22) versus Frequency IP3, THIRD ORDER OUTPUT INTERCEPT POINT (dBm) 50 10 Figure 9. P1dB versus Frequency 48 TC = -40C NF, NOISE FIGURE (dB) 25C 85C 8 TC = 85C 6 -40C 4 25C 46 44 42 VDC = 5 Vdc 1 MHz Tone Spacing 40 840 870 900 f, FREQUENCY (MHz) 930 960 2 VDC = 5 Vdc 0 840 870 900 f, FREQUENCY (MHz) 930 960 Figure 10. Third Order Output Intercept Point versus Frequency Figure 11. Noise Figure versus Frequency MMG3005NT1 RF Device Data Freescale Semiconductor 7 50 OHM TYPICAL CHARACTERISTICS: 900 MHz -35 VDC = 5 Vdc IDC = 480 mA f = 900 MHz Single-Carrier IS-95, 9 Channel Forward 750 kHz Measurement Offset 30 kHz Measurement Bandwidth ACPR, ADJACENT CHANNEL POWER RATIO (dBc) ACPR, ADJACENT CHANNEL POWER RATIO (dBc) -40 -40 -50 VDC = 5 Vdc IDC = 480 mA f = 900 MHz Single-Carrier IS-95, 9 Channel Forward 885 kHz Measurement Offset 30 kHz Measurement Bandwidth -45 TC = -40C -50 85C -55 24 -60 TC = 85C -70 25C -80 19 -40C 21 23 25 27 29 25C 25 26 27 28 29 Pout, OUTPUT POWER (dBm) Pout, OUTPUT POWER (dBm) Figure 12. IS -95 Adjacent Channel Power Ratio versus Output Power Figure 13. IS -95 Adjacent Channel Power Ratio versus Output Power MMG3005NT1 8 RF Device Data Freescale Semiconductor 50 OHM APPLICATION CIRCUIT: 1800-2200 MHz VSUPPLY R2 R1 C3 C4 1 16 15 14 13 12 Z4 3 11 DUT 6 7 8 10 9 Z5 Z6 PCB 0.075 x 0.028 Microstrip 0.280 x 0.028 Microstrip Isola FR408, 0.014, r = 3.7 C8 Z5 Z6 L1 C5 C6 RF INPUT 2 Z1 C1 Z2 Z3 C7 Current Mirror Z7 C2 RF OUTPUT 4 5 Z1, Z7 Z2 Z3 Z4 0.140 x 0.028 Microstrip 0.269 x 0.028 Microstrip 0.130 x 0.028 Microstrip 0.044 x 0.028 Microstrip Figure 14. 50 Ohm Test Circuit Schematic Table 9. 50 Ohm Test Circuit Component Designations and Values Part C1 C2 C3, C5 C4, C6 C7 C8 L1 R1 R2 Description 15 pF Chip Capacitor 1.8 pF Chip Capacitor 0.01 F Chip Capacitors 0.1 F Chip Capacitors 2.7 pF Chip Capacitor 1.2 pF Chip Capacitor 15 nH Chip Inductor 33 W Chip Resistor 0 W Chip Resistor Part Number ECUV1H150JCV 06035J1R8BBT 0603A103JAT2A 0603A102JAT2A 06035J2R7BBT 06035J1R2BBT 1008CS-150XJB Manufacturer Panasonic AVX AVX AVX AVX AVX Coilcraft MMG3005NT1 RF Device Data Freescale Semiconductor 9 50 OHM APPLICATION CIRCUIT: 1800-2200 MHz Vp VCC R2 R1 C3 C4 RFin C5 C6 L1 RFout C1 C7 C8 C2 MMG3004/5/6 Rev 3 Figure 15. 50 Ohm Test Circuit Component Layout MMG3005NT1 10 RF Device Data Freescale Semiconductor 50 OHM TYPICAL CHARACTERISTICS: 1800-2200 MHz 18 Gp, SMALL-SIGNAL GAIN (dB) 17 16 15 85C 14 13 VDC = 5 Vdc 12 1900 1960 2020 2080 2140 2200 -20 1900 1960 2020 2080 f, FREQUENCY (MHz) 2140 2200 25C TC = -40C -5 IRL, INPUT RETURN LOSS (dB) -10 TC = -40C 25C 85C -15 VDC = 5 Vdc f, FREQUENCY (MHz) Figure 16. Small -Signal Gain (S21) versus Frequency Figure 17. Input Return Loss (S11) versus Frequency 0 P1dB, 1 dB COMPRESSION POINT (dBm) ORL, OUTPUT RETURN LOSS (dB) 32 -2 31 TC = -40C 25C 30 85C 29 VDC = 5 Vdc 28 1900 1960 2020 2080 2140 2200 -4 TC = -40C -6 -8 VDC = 5 Vdc -10 1900 1960 2020 85C 25C 2080 2140 2200 f, FREQUENCY (MHz) f, FREQUENCY (MHz) Figure 18. Output Return Loss (S22) versus Frequency IP3, THIRD ORDER OUTPUT INTERCEPT POINT (dBm) 50 10 Figure 19. P1dB versus Frequency 48 TC = -40C 25C 85C NF, NOISE FIGURE (dB) 8 TC = 85C 46 6 44 4 -40C 25C 42 VDC = 5 Vdc 1 MHz Tone Spacing 40 1900 1960 2020 2080 2140 2200 2 VDC = 5 Vdc 0 1900 1960 2020 2080 2140 2200 f, FREQUENCY (MHz) f, FREQUENCY (MHz) Figure 20. Third Order Output Intercept Point versus Frequency Figure 21. Noise Figure versus Frequency MMG3005NT1 RF Device Data Freescale Semiconductor 11 50 OHM TYPICAL CHARACTERISTICS: 1800-2200 MHz ACPR, ADJACENT CHANNEL POWER RATIO (dBc) -35 VDC = 5 Vdc IDC = 480 mA f = 1960 MHz Single-Carrier IS-95, 9 Channel Forward 750 kHz Measurement Offset 30 kHz Measurement Bandwidth 25C TC = 85C -50 -40C ACPR, ADJACENT CHANNEL POWER RATIO (dBc) -40 -40 -50 VDC = 5 Vdc IDC = 480 mA f = 1960 MHz Single-Carrier IS-95, 9 Channel Forward 885 kHz Measurement Offset 30 kHz Measurement Bandwidth -45 -60 TC = 85C -40C -80 19 25C -70 -55 24 25 26 27 28 29 21 23 25 27 29 Pout, OUTPUT POWER (dBm) Pout, OUTPUT POWER (dBm) Figure 22. IS -95 Adjacent Channel Power Ratio versus Output Power Figure 23. IS -95 Adjacent Channel Power Ratio versus Output Power ACPR, ADJACENT CHANNEL POWER RATIO (dB) -20 -30 TC = 85C 25C -40C -50 -40 -60 -70 18 VDC = 5 Vdc, IDC = 480 mA, f = 2140 MHz Single-Carrier W-CDMA, 3.84 MHz Channel Bandwidth PAR = 8.5 dB @ 0.01% Probability (CCDF) 20 22 24 26 28 Pout, OUTPUT POWER (dBm) Figure 24. Single -Carrier W-CDMA Adjacent Channel Power Ratio versus Output Power MMG3005NT1 12 RF Device Data Freescale Semiconductor 50 OHM TYPICAL CHARACTERISTICS Table 10. Class A Common Emitter S -Parameters at VDC = 5 Vdc, IDC = 480 mA, TC = 255C f GHz 0.25 0.3 0.35 0.4 0.45 0.5 0.55 0.6 0.65 0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5 1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2 2.05 2.1 2.15 2.2 2.25 2.3 2.35 2.4 2.45 S11 |S11| 0.70575 0.73140 0.75442 0.77553 0.79364 0.80933 0.82301 0.83429 0.84357 0.85132 0.85696 0.86176 0.86572 0.86813 0.86945 0.86974 0.86842 0.86533 0.86095 0.85480 0.84684 0.83707 0.82469 0.80971 0.79087 0.76847 0.74126 0.70933 0.67261 0.63202 0.59058 0.55219 0.53906 0.55077 0.58350 0.63044 0.68283 0.73327 0.77875 0.81666 0.84807 0.87279 0.89261 0.90758 0.91984 -173.81 -174.91 -176.26 -177.67 -179.04 179.58 178.27 177.07 175.98 174.99 174.16 173.35 172.60 171.85 171.15 170.42 169.66 168.91 168.14 167.25 166.25 165.18 164.00 162.76 161.42 160.03 158.60 157.30 156.25 155.73 156.13 157.76 175.46 -178.72 -174.08 -171.29 -170.32 -170.78 -172.14 -174.06 -176.25 -178.55 179.07 176.70 174.31 |S21| 5.06022 4.79122 4.52885 4.27831 4.03762 3.82617 3.62033 3.43310 3.26377 3.10735 2.96322 2.82568 2.70160 2.60468 2.53732 2.48944 2.45821 2.44429 2.44811 2.46595 2.49650 2.54318 2.60413 2.68767 2.79189 2.91082 3.04944 3.20126 3.36356 3.53052 3.69596 3.84647 3.84639 3.76728 3.61364 3.40538 3.15278 2.87824 2.60183 2.33461 2.08577 1.85911 1.65704 1.47812 1.32091 S21 143.91 137.40 131.51 126.11 121.18 116.75 112.46 108.55 104.82 101.29 97.96 94.86 92.31 90.11 88.04 85.86 83.61 81.27 78.81 76.18 73.39 70.39 67.17 63.69 59.73 55.24 50.25 44.67 38.42 31.45 23.72 15.21 5.98 -3.57 -13.31 -22.98 -32.28 -41.07 -49.24 -56.78 -63.69 -70.01 -75.82 -81.19 -86.22 |S12| 0.00976 0.00866 0.00773 0.00689 0.00618 0.00565 0.00523 0.00494 0.00478 0.00468 0.00459 0.00454 0.00452 0.00455 0.00475 0.00498 0.00517 0.00537 0.00562 0.00589 0.00614 0.00639 0.00664 0.00686 0.00707 0.00723 0.00735 0.00737 0.00727 0.00702 0.00657 0.00592 0.00493 0.00394 0.00325 0.00325 0.00389 0.00480 0.00576 0.00658 0.00728 0.00782 0.00823 0.00851 0.00868 S12 -49.75 -46.60 -43.76 -40.58 -36.61 -31.68 -26.34 -20.59 -15.13 -10.28 -5.76 -1.51 3.52 7.99 12.64 15.23 16.96 18.37 19.48 19.73 19.47 18.66 17.14 15.10 12.45 8.99 4.62 -0.89 -7.59 -15.85 -25.99 -38.78 -55.47 -78.20 -110.26 -147.37 -177.72 161.34 146.52 135.49 126.95 120.20 114.85 110.74 107.68 |S22| 0.84913 0.84273 0.83759 0.83409 0.83042 0.83214 0.83079 0.82956 0.82812 0.82590 0.82489 0.82589 0.82783 0.83010 0.83192 0.83202 0.83128 0.82923 0.82679 0.82313 0.81800 0.81154 0.80396 0.79812 0.79179 0.78258 0.77256 0.76200 0.75243 0.74435 0.73950 0.73766 0.74863 0.76239 0.77658 0.78891 0.79795 0.80422 0.80618 0.80601 0.80299 0.79865 0.79341 0.78715 0.78067 S22 174.65 173.16 172.12 171.28 170.63 170.43 169.99 169.83 169.78 169.86 170.15 170.57 171.07 171.50 172.00 172.45 172.96 173.50 174.01 174.63 175.29 176.08 176.98 177.98 178.83 179.68 -179.28 -178.18 -176.93 -175.63 -174.33 -173.25 173.64 172.14 170.13 167.72 164.96 162.03 159.04 156.02 153.08 150.21 147.45 144.80 142.25 MMG3005NT1 RF Device Data Freescale Semiconductor 13 Table 10. Class A Common Emitter S -Parameters at VDC = 5 Vdc, IDC = 480 mA, TC = 255C (continued) f GHz 2.5 2.55 2.6 2.65 2.7 2.75 2.8 2.85 2.9 2.95 3 S11 |S11| 0.92917 0.93606 0.94249 0.94659 0.95002 0.95243 0.95418 0.95534 0.95570 0.95565 0.95487 171.99 169.65 167.38 165.17 163.00 160.86 158.70 156.67 154.64 152.68 150.86 |S21| 1.18240 1.06136 0.95471 0.86109 0.77869 0.70576 0.64070 0.58229 0.52887 0.47907 0.43144 S21 -90.93 -95.41 -99.69 -103.83 -107.89 -111.91 -115.96 -120.08 -124.40 -128.91 -133.65 |S12| 0.00876 0.00878 0.00880 0.00882 0.00894 0.00932 0.01006 0.01141 0.01358 0.01662 0.02061 S12 105.84 105.17 105.76 107.70 111.20 116.13 121.98 127.95 132.34 134.33 133.72 |S22| 0.77298 0.76528 0.75557 0.74569 0.73387 0.72034 0.70405 0.68401 0.65990 0.63014 0.59605 S22 139.76 137.41 135.15 132.95 130.86 128.82 126.97 125.22 123.77 122.76 122.51 MMG3005NT1 14 RF Device Data Freescale Semiconductor 2.2 x 2.2 1.35 0.6 2.6 0.8 5.3 NOTES: 1. THERMAL AND RF GROUNDING CONSIDERATIONS SHOULD BE USED IN PCB LAYOUT DESIGN. 2. DEPENDING ON PCB DESIGN RULES, AS MANY VIAS AS POSSIBLE SHOULD BE PLACED ON THE BACKSIDE CENTER METAL GROUND LANDING PATTERN. 3. REFER TO FREESCALE APPLICATION NOTE AN2467 FOR ADDITIONAL PQFN PCB GUIDELINES. Figure 25. Recommended Mounting Configuration MMG3005NT1 RF Device Data Freescale Semiconductor 15 NOTES MMG3005NT1 16 RF Device Data Freescale Semiconductor NOTES MMG3005NT1 RF Device Data Freescale Semiconductor 17 NOTES MMG3005NT1 18 RF Device Data Freescale Semiconductor PACKAGE DIMENSIONS 5 PIN 1 INDEX DETAIL G 0.15 C 2X M 5 2.5 B 0.15 C 2X M 0.1 C NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS. 2. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 3. THE COMPLETE JEDEC DESIGNATOR FOR THIS PACKAGE IS: HF-PQFP-N. 4. COPLANARITY APPLIES TO LEADS AND DIE ATTACH PAD. 5. MINIMUM METAL GAP SHOULD BE 0.25MM 2.2 2.0 2.20 1.95 16X 0.05 C 4 (0.55) 2.20 1.95 2.2 1.8 0.1 16 1 (0.8) VIEW ROTATED 90_ CLOCKWISE C DETAIL G SEATING PLANE EXPOSED DIE ATTACH PAD 14 13 1 M CAB DETAIL M 12X (0.05) 0.92 0.78 0.1 M C A B 0.05 M C 0.7 (0.2) 0.3 (0.2) 0.92 0.78 0.1 M C A B 0.05 M C 1 2.2 1.8 0.1 M 8X 0.8 9 5 CAB 12X 0.62 8 6 0.48 20X 1.20 0.95 0.1 M C A B 0.05 M C VIEW M - M DETAIL M 12X 0.37 0.23 0.7 0.3 CORNER CONFIGURATION CASE 1543-02 ISSUE B PQFN 5x5 PLASTIC MMG3005NT1 RF Device Data Freescale Semiconductor 19 How to Reach Us: Home Page: www.freescale.com E-mail: support@freescale.com USA/Europe or Locations Not Listed: Freescale Semiconductor Technical Information Center, CH370 1300 N. Alma School Road Chandler, Arizona 85224 +1-800-521-6274 or +1-480-768-2130 support@freescale.com Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7 81829 Muenchen, Germany +44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) support@freescale.com Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1-8-1, Shimo-Meguro, Meguro-ku, Tokyo 153-0064 Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Asia/Pacific: Freescale Semiconductor Hong Kong Ltd. Technical Information Center 2 Dai King Street Tai Po Industrial Estate Tai Po, N.T., Hong Kong +800 2666 8080 support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center P.O. Box 5405 Denver, Colorado 80217 1-800-441-2447 or 303-675-2140 Fax: 303-675-2150 LDCForFreescaleSemiconductor@hibbertgroup.com Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals", must be validated for each customer application by customer's technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescalet and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. Freescale Semiconductor, Inc. 2005. All rights reserved. RoHS- compliant and/or Pb- free versions of Freescale products have the functionality and electrical characteristics of their non - RoHS- compliant and/or non- Pb- free counterparts. For further information, see http://www.freescale.com or contact your Freescale sales representative. For information on Freescale's Environmental Products program, go to http://www.freescale.com/epp. MMG3005NT1 Rev. 20 1, 11/2005 Document Number: MMG3005NT1 RF Device Data Freescale Semiconductor |
Price & Availability of MMG3005NT1
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |