 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NJG1516KC1 SPDT SWITCH GaAs MMIC nGENERAL DESCRIPTION NJG1516KC1 is a GaAs SPDT switch IC suited for antenna switch of cellular phone handset. This switch features low loss, high isolation at high power, and exhibits wide operating frequency range from 50MHz to 3GHz at low voltage of 2.7V. The ultra small & ultra thin FLP10-C1 package is applied. nFEATURES lSingle low voltage control lHandling power lLow insertion loss lHigh isolation lLow current consumption lVery small package nPACKAGE OUTLINE NJG1516KC1 +2.7V min. 36dBm typ.@f=2GHz, VCTL=3.0V 0.4dB typ. @f=1GHz, PIN=31dBm, VCTL=3V 0.4dB typ. @f=1GHz, PIN=34.5dBm, VCTL=3.5V 0.7dB typ. @f=2GHz, PIN=31.5dBm, VCTL=3V 27dB typ.@f=1GHz, PIN=34.5dBm, VCTL=3.0V 25dB typ.@f=2GHz, PIN=31.5dBm, VCTL=3.0V 38uA typ.@f=2GHz, PIN=34.5dBm, VCTL=3.0V FLP10-C1 (Package size: 3.0x2.8x0.75mm) nPIN CONFIGURATION KC1 Type (Top View) 1 2 3 4 5 Orientation Mark 10 9 8 7 6 Pin Connection 1.P1 2.GND 3.GND 4.GND 5.P2 6.VCTL2 7.GND 8.PC 9.GND 10.VCTL1 nTRUTH TABLE "H"=VCTL (H), "L"=VCTL (L) VCTL1 VCTL2 PC - P1 PC - P2 H L ON OFF L H OFF ON -1- NJG1516KC1 nABSOLUTE MAXIMUM RATINGS (Ta=25C) PARAMETER Input Power Control Voltage Power Dissipation Operating Temp. Storage Temp. SYMBOL PIN VCTL PD Topr Tstg CONDITIONS VCTL (L)=0V, VCTL (H)=3.0V VCTL (H)-VCTL (L) RATINGS 38 12 500 -40~+85 -55~+125 UNITS dBm V mW C C nELECTRICAL CHARACTERISTICS (VCTL (L)=0V, VCTL (H)=3V, ZS=Zl =50, Ta=25C) PARAMETERS Operating Voltage (LOW) Operating Voltage (HIGH) SYMBOL VCTL(L) VCTL(H) ICTL LOSS1 LOSS2 LOSS3 LOSS4 ISL1 ISL2 PIN1 PIN2 PIN3 PIN4 PIN5 P-0.2dB1 VSWR TSW CONDITIONS MIN -0.2 TYP 0 3.0 38 0.4 0.4 0.5 0.7 27 25 36 1.45 70 MAX 0.2 9.0 55 0.5 0.5 0.6 0.8 33.5 34 37 38 34.5 1.55 - UNITS V V uA dB dB dB dB dB dB dBm dBm dBm dBm dBm dBm f=1GHz, PIN=34.5dBm f=1GHz, PIN=34.5dBm f=1GHz, PIN=31dBm f=1GHz, PIN=34.5dBm VCTL(H)=3.5V, VCTL(L)=0V f=1GHz, PIN=34.5dBm f=2GHz, PIN=31.5dBm f=1GHz, PIN=34.5dBm f=2GHz, PIN=31.5dBm VCTL(H)=2.7V, f=2GHz VCTL(H)=3V, f=2GHz VCTL(H)=4V, f=2GHz VCTL(H)=6V, f=2GHz VCTL(H)=9V, f=2GHz f=2GHz f=0.05~2.5GHz, ON State f=0.05~2.5GHz 2.7 26 22 34.5 - Control Current Insertion Loss 1 Insertion Loss 2 Insertion Loss 3 Insertion Loss 4 Isolation 1 (PC-P1, PC-P2) Isolation 2 (PC-P1, PC-P2) Maximum Input Power 1 *1 Maximum Input Power 2 Maximum Input Power 3 Maximum Input Power 4 Maximum Input Power 5 Pout at 0.2dB Compression point VSWR 1 (PC, P1, P2) Switching Time *1 *1 *1 *1 ns *1: Maximum Input Power: This value is defined as maximum input power of linear operating region or damage free operating region. -2- NJG1516KC1 nELECTRICAL CHARACTERISTICS (Cellular Band) (VCTL(L)=0V, VCTL(H)=2.7V, Zs=Zl =50, Ta=25C) PARAMETERS Frequency range Control voltage (HIGH) Insertion Loss 5 SYMBOL fin VCTL(H) LOSS5 ISL3 P-0.2dB(2) IIP3(1) IIP3(2) 2fo CONDITIONS MIN 800 TYP 0.4 27 35 62 60 -80 MAX 1000 9 0.5 - UNITS MHz V dB dB dBm dBm dBm dBc PIN=25dBm PIN=25dBm PIN=25dBm 2.7 26 33.5 Isolation 3 (PC-P1, PC-P2) Pout at 0.2dB Compression point 2 Input 3rd Order Intercept Point 1 Input 3rd Order Intercept Point 2 Second Harmonics f=900+901MHz, PIN=25dBm, VCTL(H)=3V, VCTL(L)=0V *2 f=900+901MHz, PIN=25dBm VCTL(H)=2.7V, VCTL(L)=0V *2 f=900MHz, PIN=25dBm 2nd Harmonics of Input Signal - = -83dBc f=900MHz, PIN=25dBm Third Harmonics VSWR 2 (PC, P1, P2) 3fo VSWR2 3rd Harmonics of Input Signal - -70 1.15 1.25 dBc =-100dBc ON State *2: The input IP3 is defined as following equation. IIP3 = (3 x Pout - IM3) / 2 + LOSS -3- NJG1516KC1 nTERMINAL INFORMATION No. 1 SYMBOL P1 EXPLANATION RF port. This port is connected with PC port by controlling 6th pin (VCTL(H)) to 2.7~9.0V and 4th pin (VCTL(L)) to -0.2~+0.2V. An external capacitor is required to block the DC bias voltage of internal circuit. (50~100MHz: 0.01F, 0.1~0.5GHz: 1000pF, 0.5~2.5GHz: 56pF) Ground terminal. Please connect this terminal with ground plane as close as possible for excellent RF performance. RF port. This port is connected with PC port by controlling 4th pin (VCTL(H)) to 2.7~9.0V and 6th pin (VCTL(L)) to -0.2~+0.2V. An external capacitor is required to block the DC bias voltage of internal circuit. (50~100MHz: 0.01F, 0.1~0.5GHz: 1000pF, 0.5~2.5GHz: 56pF) Control port 2. The voltage of this port controls PC to P2 state. The `ON' and `OFF' state is toggled by controlling voltage of this terminal such as th high-state (2.7~5.5V) or low-state (-0.2~+0.2V). The voltage of 6 pin have to be set to opposite state. The bypass capacitor has to be chosen to reduce switching speed delay from 10pF~1000pF range. Common RF port. In order to block the DC bias voltage of internal circuit, an external capacitor is required. (50~100MHz: 0.01uF, 0.1~0.5GHz: 1000pF, 0.5~2.5GHz: 56pF) Control port 1. The voltage of this port controls PC to P1 state. The `ON' and `OFF' state is toggled by controlling voltage of this terminal such as th high-state (2.7-5.5V) or low-state (-0.2~+0.2V). The voltage of 4 pin have to be set to opposite state. The bypass capacitor has to be chosen to reduce switching speed delay from 10pF~1000pF range. 2, 3, 4, 7, 9 GND 5 P2 6 VCTL2 8 PC 10 VCTL1 -4- NJG1516KC1 nELECTRICAL CHARACTERISTICS (f=50MHz~3GHz, with application circuit, losses of external circuit are excluded) PC-P1 Insertion Loss vs. Frequency (VCTL1=3.0V,VCTL2=0V,Pin=0dBm) 0.0 0.0 PC-P2 Insertion Loss vs. Frequency (VCTL1=0V,VCTL2=3.0V,Pin=0dBm) Insertion Loss (dB) -0.5 Insertion Loss (dB) 0.5 1.0 1.5 2.0 2.5 3.0 -0.5 -1.0 -1.0 -1.5 -1.5 -2.0 0.0 -2.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) PC-P1 Isoration vs. Frequency -15 (VCTL1=0V,VCTL2=3V,Pin=0dBm) -15 PC-P2 Isoration vs. Frequency (VCTL1=3V,VCTL2=0V,Pin=0dBm) -20 -20 Isolation (dB) -30 Isolation (dB) 0.5 1.0 1.5 2.0 2.5 3.0 -25 -25 -30 -35 -35 -40 -40 -45 0.0 -45 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) PC-P1 VSWR vs. Frequency (VCTL1=3V,VCTL2=0V,PC port) 2.5 2.5 PC-P1 VSWR vs. Frequency (VCTL1=3V, VCTL2=0V, P1 port) 2.0 2.0 1.5 VSWR 1.5 1.0 0.0 1.0 0.5 1.0 1.5 2.0 2.5 3.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 VSWR Frequency (GHz) Frequency (GHz) -5- NJG1516KC1 nELECTRICAL CHARACTERISTICS (f=1GHz, with application circuit (Parts list 3), losses of PCB, DC blocking capacitor are excluded) Output Power,Insertion Loss vs. Input power (PC-P1,f=1GHz) 50 45 40 35 30 25 20 15 10 15 VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.0V VCTL=7.0V VCTL=9.0V PC-P1 Isolation vs. Input Power (PC-P1,f=1GHz) -20 VDD=2.7V VDD=3.0V VDD=3.5V VDD=4.0V VDD=5.0V VDD=6.0V VDD=7.0V VDD=9.0V -0.3 -0.4 -22 Output Power(dBm) Insertion Loss(dB) -0.5 -0.6 -0.7 -0.8 -0.9 Isolation(dB) -24 -26 -28 -1 -1.1 40 -30 20 25 30 35 25 30 35 40 Input Power(dBm) Input Power(dBm) I 200 CTL vs. Input Power (PC-P1,f=1GHz) VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.0V VCTL=7.0V VCTL=9.0V 150 ICTL (uA) 100 50 0 15 20 25 30 35 40 Input Power(dBm) -6- NJG1516KC1 n ELECTRICAL CHARACTERISTICS (f=2GHz, with application circuit (Parts list 3), losses of PCB, connector and DC blocking capacitor are excluded) Output Power,Insertion Loss vs. Input power (PC-P1,f=2GHz) 50 45 40 35 30 25 20 15 10 VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.0V VCTL=7.0V VCTL=9.0V PC-P1 Isoration vs. Input Power (PC-P1,f=2GHz) -20 VDD=2.7V VDD=3.0V VDD=3.5V VDD=4.0V VDD=5.0V VDD=6.0V VDD=7.0V VDD=9.0V -0.6 -0.7 -22 Output Power(dBm) -0.9 -1 -1.1 -1.2 Insertion Loss(dB) Isolation(dB) -0.8 -24 -26 -28 -1.3 -1.4 40 -30 15 20 25 30 35 25 30 35 40 Input Power(dBm) Input Power(dBm) I 200 CTL vs. Input Power (PC-P1,f=2GHz) VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.0V VCTL=7.0V VCTL=9.0V 150 ICTL (uA) 100 50 0 15 20 25 30 35 40 Input Power(dBm) -7- NJG1516KC1 nELECTRICAL CHARACTERISTICS (with application circuit, Parts list 3) Switching speed Output Power,IM3 vs. Input Power (VCTL1=3.0V, VCTL2=0V) (VCTL1=2.7V,VCTL2=0V,f=900+901MHz) 1V 60 IM3,Output Power(dBm) 40 20 0 -20 -40 -60 -80 20 Output Power IIP3=60.9dBm (Input Power=25dBm) 200mV /div 44ns -1V -19.8ns IM3 25 30 35 40 45 50 55 60 10ns/div 80.2ns Input Power(dBm) Output Power,IM3 vs. Input Power (VCTL1=3V,VCTL2=0V,f=900+901MHz) Output Power,IM3 vs. Input Power (VCTL1=3.5V,VCTL2=0V,f=900+901MHz) 60 60 IM3,Output Power(dBm) 40 20 0 -20 -40 -60 -80 20 IM3,Output Power(dBm) Output Power 40 20 0 -20 -40 -60 -80 20 Output Power IIP3=62.5dBm (Input Power=25dBm) IIP3=63.4dBm (Input Power=25dBm) IM3 IM3 25 30 35 40 45 50 55 60 25 30 35 40 45 50 55 60 Input Power(dBm) Input Power(dBm) IM3 vs. Input Power (f=900+901MHz) -20 94 92 -30 90 88 86 84 82 80 Pin-IM3 vs. Input Power (f=900+901MHz) THRU VCTL=3.5V VCTL=3V VCTL=2.8V VCTL=2.7V VCTL=2.5V -40 -50 THRU VCTL=3.5V VCTL=3V VCTL=2.8V VCTL=2.7V VCTL=2.5V -60 -70 Pin-IM3 (dB) IM3(dBm) 20 22 24 26 28 30 20 21 22 23 24 25 26 27 28 Input Power(dBm) Input Power(dBm) -8- NJG1516KC1 nELECTRICAL CHARACTERISTICS (with application circuit, Parts list 3) ACP vs. Input Power (f=1GHz,offset=0.9MHz) -60 -80 ACP vs. Input Power (f=1GHz,offset=1.98MHz) -65 -85 ACP(dBc) -70 ACP(dBc) Thru VCTL=3V VCTL=2.7V VCTL=2.5V -90 -75 -95 Thru VCTL=3V VCTL=2.7V VCTL=2.5V -80 24 25 26 27 28 29 30 -100 24 25 26 27 28 29 30 Input Power(dBm) Input Power(dBm) 2nd Harmonics vs. Input Power (f=900MHz) -60 -40 3rd Harmonics vs. Input Power (f=900MHz) Input 3fo Level=-110dBc VCTL=2.5V VCTL=2.7V VCTL=2.8V VCTL=3.0V VCTL=3.5V VCTL=4V VCTL=5V VCTL=6V -65 -50 2nd Harmonics(dBc) -70 3rd Harmonics(dBc) 35 -60 -75 -70 -80 -85 Input 2fo Level VCTL=2.5V VCTL=2.7V VCTL=2.8V VCTL=3.0V VCTL=3.5V VCTL=4V VCTL=5V VCTL=6V -80 -90 20 25 30 -90 20 25 30 35 Input Power(dBm) Input Power(dBm) -9- NJG1516KC1 nELECTRICAL CHARACTERISTICS (with application circuit, Parts list 3) 2nd Harmonics vs. Input Power (f=1800MHz) -60 Input 2nd Level VCTL=2.5V VCTL=2.7V VCTL=2.8V VCTL=3.0V VCTL=3.5V VCTL=4V VCTL=5V VCTL=6V 3rd Harmonics vs. Input Power (f=1800MHz) -40 Input 3fo Level=-100dBc VCTL=2.5V VCTL=2.7V VCTL=2.8V VCTL=3.0V VCTL=3.5V VCTL=4V VCTL=5V VCTL=6V -65 -50 2nd Harmonics(dBc) -70 3rd Harmonics(dBc) -60 -75 -80 -70 -85 -80 -90 -95 -90 20 25 30 35 20 25 30 35 Input Power(dBm) Input Power(dBm) Insertion Loss vs. Ambient Temperature (PC-P1,f=1GHz,Input Power=34.5dBm) -0.3 Insertion Loss vs. Ambient Temperature (PC-P1,f=2GHz,Input Power=31.5dBm) -0.5 -0.4 -0.6 Insertion Loss (dB) -0.5 Insertion Loss (dB) -0.7 -0.6 -0.8 -0.7 VCTL=2.5V VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.0V VCTL=7.0V VCTL=9.0V -0.9 VCTL=2.5V VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.0V VCTL=7.0V VCTL=9.0V -0.8 -50 0 50 o 100 -1 -50 0 50 o 100 Ambient Temperature ( C) Ambient Temperature ( C) - 10 - NJG1516KC1 nELECTRICAL CHARACTERISTICS (with application circuit, Parts list 3) Isolation vs. Ambient Temperature (PC-P1,f=1GHz,Input Power=34.5dBm) -26 -24 Isolation vs. Ambient Temperature (PC-P1,f=2GHz,Input Power=31.5dBm) VCTL=2.5V VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.0V VCTL=7.0V VCTL=9.0V -26.5 -24.5 Isolation (dB) -27 Isolation (dB) VCTL=2.5V VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.0V VCTL=7.0V VCTL=9.0V -25 -27.5 -25.5 -28 -28.5 -50 -26 0 50 100 -50 0 50 o 100 Ambient Temperature (oC) Ambient Temperature ( C) ICTL vs. Ambient Temperature (PC-P1,f=1GHz,Input Power=34.5dBm) 250 VCTL=2.5V VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.0V VCTL=7.0V VCTL=9.0V 200 ICTL (uA) 150 100 50 0 -50 0 50 o 100 Ambient Temperature ( C) - 11 - NJG1516KC1 n TEMPERATURE CHARAC TERISTICS (with application circuit, Parts list 3) IIP3 vs. Ambient Temperature (PC-P1,f=900+901MHz,Input Power=25dBm) 70 Thru 65 -60 Input 2fo Level VCTL=2.5V VCTL=2.8V VCTL=3V VCTL=3.5V 2nd Harmonics vs. Ambient Temperture (f=900MHz,Input Power=25dBm) 2nd Harmonics(dBc) 100 -65 IIP3(dBm) -70 60 -75 55 VTCL=2.5V VCTL=2.7V VCTL=2.8V VCTL=3.0V VCTL=3.5V -80 50 -50 0 50 o -85 -50 0 50 100 Ambient Temperature ( C) Ambient Temperature (oC) 3rd Harmonics vs. Ambient Temperture (f=900MHz,Input Power=25dBm) -65 2nd Harmonics vs. Ambient Temperture (f=1800MHz,Input Power=25dBm) -70 2nd Harmonics(dBc) 3rd Harmonics(dBc) -70 -72 -75 -74 -80 Input 3fo Level=-110dBc VCTL=2.5V VCTL=2.8V VCTL=3V VCTL=3.5V -76 Input 2fo Level=-90dBc VCTL=2.5V VCTL=2.8V VCTL=3V VCTL=3.5V -85 -78 -90 -50 0 50 o 100 -80 -50 0 50 100 Ambient Temperature ( C) Ambient Temperature (oC) 3rd Harmonics vs. Ambient Temperture (f=1800MHz,Input Power=25dBm) -55 Input 3fo level=-111dBc VCTL=2.5V VCTL=2.8V VCTL=3V VCTL=3.5V 3rd Harmonics(dBc) -60 -65 -70 -75 -80 -50 Ambient Temperature (oC) 0 50 100 - 12 - NJG1516KC1 nAPPLICATION CIRCUIT 1 (Parts list 1~3) VCTL1 (3V/0V) P1 C1 C5 PC C3 VCTL2 (3V/0V) P2 C2 C4 nRECOMMENDED PCB DESIGN (TOP VIEW) P2 C2 C1 P1 C4 C3 VCTL2 PC nCircuit losses including losses of capacitors and connectors. Frequency (GHz) 0.8 1.0 1.5 1.8 2.0 2.5 Loss (dB) 0.12 0.13 0.17 0.19 0.20 0.26 C5 VCTL1 PCB: FR-4, t=0.5mm Capacitor: size 1005 Strip Line Width=1.0mm PCB SIZE: 14.0x19.4mm nPARTS LIST PART ID Freq (MHz) C1~C3 C4, C5 1 50~100 0.01uF 10pF 2 100~500 1000pF 10pF 3 500~2000 56pF 10pF PRECAUTIONS [1]The DC blocking capacitors have to be placed at RF terminal of P1, P2 and PC. [2]Bypass capacitors (C4, C5) should be placed close to terminals of VCTL1, VCTL2 to reduce stripline influence of RF characteristics. [3]For good isolation, the GND terminal (3rd , 6th, 7th pin) must be placed possibly close to ground plane of substrate, and through holes for GND should be placed near by the pin connection. [4] To avoid degradation of isolation or high power characteristics, please layout ground pattern right under this IC. - 13 - NJG1516KC1 n PACKAGE OUTLINE (FLP10-C1) 3 .0 .1 0 0 50 5 .7 .0 1 0 6 + .1 0 0 -0 5 .15 .0 2.40.1 1 0 .5 0 .5 5 0.2 0.2 2.80.1 0.1 + .1 0 0 -0 5 .2 .0 Lead material Lead surface finish Molding material UNIT Weight : Copper : Solder plating : Epoxy resin : mm : 15mg 0.1 Cautions on using this product This product contains Gallium-Arsenide (GaAs) which is a harmful material. * Do NOT eat or put into mouth. * Do NOT dispose in fire or break up this product. * Do NOT chemically make gas or powder with this product. * To w aste this product, please obey the relating law of your country. This product may be damaged with electric static discharge (ESD) or spike voltage. Please handle with care to avoid these damages. [CAUTION] The specifications on this databook are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. - 14 - |
Price & Availability of NJG1516KC1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |