|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
NJU7706/07 VOLTAGE DETECTOR s GENERAL DESCRIPTION The NJU7706/07 is a high precision voltage detector with a built-in delay time generator of fixed time. The detection voltage is fixed internally with an accuracy of 1.0%, and three delay times 50ms, 100ms and 200ms are available. NJU7706 is Nch. Open Drain and NJU7707 of output form is a C-MOS output. s PACKAGE OUTLINE NJU7706/07F s FEATURES qHigh Precision Detection Voltage qLow Quiescent Current qDetection Voltage Range qDelay Time(Built-in Fixed Type) qON/OFF switch of delay time (DS pin) qManual Reset qOutput Circuit Form qPackage Outline 1.0% 1.8A typ. 1.5 6.0V(0.1V step) 50ms /100ms /200ms(Built-in Fixed Type) 2type: Active "H" / Active "L" NJU7706: Nch. Open Drain type NJU7707: C-MOS Output SOT-23-5 (MTP5) s PIN CONFIGURATION 5 4 123 NJU770*F/F3 PIN FUNCTION 1.DS 2.VSS 3.MR 4.VOUT 5.VDD Ver.2004-01-16 -1- NJU7706/07 s EQUIVALENT CIRCUIT NJU7706**A* V DD VDD NJU7706**B* Delay Circuit Vref V OUT Vref Delay Circuit V OUT VSS DS MR VSS DS MR NJU7707**A* VDD V DD NJU7707**B* Delay Circuit Vref V OUT Vref Delay Circuit V OUT V SS DS MR VSS DS MR s DETECTION VOLTAGE RANK LIST Device Name NJU7706/07F39A1 NJU7706/07F42A1 Device Name NJU7706/07F15A1 NJU7706/07F22A1 NJU7706/07F27A1 NJU7706/07F29A1 NJU7706/07F42A1 NJU7706/07F06A1 Device Name NJU7706/07F39A1 NJU7706/07F42A1 VDET 3.9V 4.2V VDET 1.5V 2.2V 2.7V 2.9V 4.2V 6.0V VDET 3.9V 4.2V MR Logic Active "L" Active "L" MR Logic Active "L" Active "L" Active "L" Active "L" Active "L" Active "L" MR Logic Active "L" Active "L" Delay Time 50mS 50mS Delay Time 100mS 100mS 100mS 100mS 100mS 100mS Delay Time 200mS 200mS Device Name NJU7706/07F27B1 VDET 2.7V MR Logic Active "H" Delay Time 100mS -2- Ver.2004-01-16 NJU7706/07 s NJU7706 s ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Input Voltage VDD Output Voltage VOUT Output Current IOUT Power Dissipation PD Operating Temperature Topr Storage Temperature Tstg s ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL Detection Voltage VDET Hysteresis Voltage VHYS Quiescent Current Output Current ISS IOUT RATINGS +10 VSS-0.3 +10 50 200 -40 +85 -40 +125 (Ta=25C) UNIT V V mA mW C C (Ta=25C) MAX. UNIT +1.0% V 130 mV 1.7 A 2.2 - mA - 0.1 A - 57.5 115 230 300 VDD 0.3 VDD 0.3 VDD VDD-1.5 ppm/C mS mS mS S V V V V V V M V TEST CONDITION VDD=VDET+1V Nch,VDS=0.5V VDET=1.5V 1.9V Version VDET=2.0V 6.0V Version VDD=1.2V VDD=2.4V (2.7V Version) Output Leak Current ILEAK VDD=VOUT=9V Detection Voltage Temperature VDET /Ta Ta=0 +85C Coefficient Delay Time 1 td1 VDD=VDET+1V, DS="L Level" NJU7706F***1 NJU7706F***2 NJU7706F***3 VDD=VDET+1V, DS="H Level" MIN. -1.0% 70 - - 0.75 4.5 - - 42.5 85 170 25 1.5 0 1.5 0 VDD-0.3 0 TYP. - 90 1.0 1.3 2.0 7.0 - 100 50 100 200 50 - - - - - - Delay Time 2 td2 VDS_H Input Voltage of DS pin VDS_L VMR_H Input Voltage of MR pin (Active "L") VMR_L VMR_H Input Voltage of MR pin (Active "H") VMR_L Impedance of 1.0 2.0 3.0 RMR MR pin Operating Voltage 0.8 9 VDD RL=100k - (*note 1) (*note 1): The minimum Operating Voltage(VOPL) indicates the same value of the output voltage(VOUT) on condition that VOUT becomes 10% or less of the input voltage(VDD). Ver.2004-01-16 -3- NJU7706/07 ! TEST CIRCUIT " Circuit Operating Current TEST CIRCUIT " Detection voltage/Minimum operating voltage TEST CIRCUIT ISS A V DD V OUT V DD MR V DET / V OPL V RL V DD V OUT V MR V OUT NJM7706 V DD DS V SS NJM7706 DS V SS " MR pin Input voltage TEST CIRCUIT " Leak current / Output current TEST CIRCUIT RL V DD V DD DS V OUT V MR V MR V V MR V DD DS V DD V OUT ILEAK/ IOUT A NJM7706 NJM7706 MR V OUT / V DS V SS V SS " Delay time1 TEST CIRCUIT Oscilloscope " Delay time2 TEST CIRCUIT Oscilloscope RL V DD V DD DS V OUT ch1 ch2 RL V DD V DD V OUT ch1 ch2 NJM7706 MR NJM7706 DS MR V SS V SS -4- Ver.2004-01-16 NJU7706/07 ! TYPICAL APPLICATION 1 Power Supply Monitor Circuit V DD RL V DD V OUT Reset Signal INPUT Micro-Processor etc NJM7706 DS MR V SS 2 Power Supply Monitor Circuit (VDD line SEPARATE) V DD1 V DD2 RL V DD V OUT Reset Signal INPUT Micro-Processor etc NJM7706 DS MR V SS Ver.2004-01-16 -5- NJU7706/07 s NJU7707 s ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Input Voltage VDD Output Voltage VOUT Output Current IOUT Power Dissipation PD Operating Temperature Topr Storage Temperature Tstg s ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL Detection Voltage VDET Hysteresis Voltage VHYS Quiescent Current ISS RATINGS +10 VSS-0.3 VDD+0.3 50 200 -40 +85 -40 +125 (Ta=25C) UNIT V V mA mW C C (Ta=25C) MAX. UNIT +1.0% V 130 mV 1.7 A 2.2 - - - mA - - - 57.5 115 230 300 VDD 0.3 VDD 0.3 VDD VDD-1.5 ppm/C mS mS mS S V V V V V V M V TEST CONDITION VDD=VDET+1V Nch, VDS=0.5V Output Current IOUT Pch, VDS=0.5V VDET=1.5V 1.9V Version VDET=2.0V 6.0V Version VDD=1.2V VDD=2.4V (2.7V Version) VDD=4.8V (3.9V Version) VDD=6.0V (4.0V 5.6V Version) VDD=8.4V (5.7V Version) MIN. -1.0% 70 - - 0.75 4.5 2.0 2.5 3.0 - 42.5 85 170 25 1.5 0 1.5 0 VDD-0.3 0 TYP. - 90 1.0 1.3 2.0 7.0 3.5 4.0 5.0 100 50 100 200 50 - - - - - - Detection Voltage Temperature Coefficient Delay Time 1 VDET /Ta Ta=0 +85C VDD=VDET+1V, DS="L Level" NJU7707F***1 NJU7707F***2 NJU7707F***3 VDD=VDET+1V, DS="H Level" td1 Delay Time 2 td2 VDS_H Input Voltage of DS pin VDS_L VMR_H Input Voltage of MR pin (Active "L") VMR_L VMR_H Input Voltage of MR pin (Active "H") VMR_L Impedance of 1.0 2.0 3.0 RMR MR pin Operating Voltage 0.8 9 VDD RL=100k - (*note 2) (*note 2): The minimum Operating Voltage(VOPL) indicates the same value of the output voltage(VOUT) on condition that VOUT becomes 10% or less of the input voltage(VDD). -6- Ver.2004-01-16 NJU7706/07 ! TEST CIRCUIT " Circuit Operating Current TEST CIRCUIT ISS A V DD V DET V OUT V DD MR DS V V DD " Detection voltage TEST CIRCUIT V OUT V MR V OUT NJM7707 DS NJM7707 V SS V SS " MR pin Input voltage TEST CIRCUIT " Nch Output current TEST CIRCUIT IOUT V DD V DD DS V OUT V MR V MR V V MR V OUT V DD DS V DD V OUT A NJM7707 NJM7707 MR V DS V SS V SS " Pch Output current TEST CIRCUIT V DS IOUT V DD V DD DS V OUT A NJM7707 MR V SS Ver.2004-01-16 -7- NJU7706/07 " Delay time1 TEST CIRCUIT Oscilloscope " Delay time2 TEST CIRCUIT Oscilloscope ch1 ch2 ch1 ch2 V DD V DD V OUT V DD V DD V OUT NJM7707 DS MR NJM7707 DS MR V SS V SS " Minimum operating voltage TEST CIRCUIT RL V OPL V V DD DS V DD V OUT V MR V OUT NJM7707 V SS ! TYPICAL APPLICATION 1 Power Supply Monitor Circuit (VDD line COMMON) V DD V DD V OUT NJM7707 DS MR Reset Signal INPUT Micro-Processor etc V SS -8- Ver.2004-01-16 NJU7706/07 [CAUTION] The specifications on this databook are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. Ver.2004-01-16 -9- |
Price & Availability of NJU7707F |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |