 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Product Bulletin OP910W December 1998 PIN Silicon Photodiode Type OP910W Dimensions are in inches (millimeters). Features *Wide receiving angle *Fast switching time *Linear response vs. irradiance *Enhanced temperature range Absolute Maximum Ratings (TA = 25oC unless otherwise noted) Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 V Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65o C to +150o C Operating Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65o C to +125o C Lead Soldering Temperature [1/16 inch (1.6mm) from case for 5 sec. with soldering iron] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200oC(1) Power Dissipation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 mW Notes: (1) RMA Flux is recommended. Duration can be extended to 10 sec. max. when flow soldering. (2) Light source is an unfiltered GaAs LED with a peak wavelength of 935 nm and a radiometric intensity level which varies less than 10% over the entire lens surface of the photodiode being tested. (3) Junction temperature maintained at 25 o C. (4) To calculate typical dark current in nA, use the formula ID=10(0.42 TA-1.5) where TA is ambient temperature in o C. (5) Derate linearly 2.5 mW/o C above 25o C. Description The OP910W consists of a PIN silicon photodiode mounted in a two-leaded hermetic TO-46 package. The flat lens has an acceptance half angle of 40o. Typical Performance Curves Typical Spectral Response Wavelength - nm Optek Technology, Inc. 1215 W. Crosby Road Carrollton, Texas 75006 21 (972) 323-2200 Fax (972) 323-2396 Type OP910W Electrical Characteristics (TA = 25o C unless otherwise noted) SYMBOL IL ID V(BR)R tr tf CP VF Dark Current Reverse Voltage Breakdown Rise Time Fall Time Half Angle Capacitance Forward Voltage 100 10 10 +/-40 13 1.2 PARAMETER Light Current MIN TYP MAX UNITS 1.7 2.4 1 10 m A nA V nS nS degr. pF V TEST CONDITION VR = 20 V, Ee = .50 mW/cm2 note 2, 3 VR = 20 V, Ee = 0.0 IR = 100 m A VR = 20 V, RL = 50 OHMS VR = 20 V, RL = 50 OHMS IF = Constant VR = 0 V, F = 1 Mhz, Ee = 0 IF = 100 mA Typical Performance Curves Normalized Light Current vs. Reverse Voltage Total Capacitance vs. Reverse Voltage Normalized Light and Dark Current vs. Ambient Temperature VR = 5 V = 935 nm Normalized to TA = 25o C TA = 25o C Ee = 0 mW/cm 2 f = 1 MHz TA = 25o C = 935 nm Light Current Dark Current VR - Reverse Voltage - V VR - Reverse Voltage - V TA - Ambient Temperature - o C Light Current vs. Irradiance Switching Time Test Circuit Light Current vs. Angular Displacement q - Angular Displacement - Deg. Ee - Irradiance - mW/cm 2 Optek reserves the right to make changes at any time in order to improve design and to supply the best product possible. Optek Technology, Inc. 1215 W. Crosby Road Carrollton, Texas 75006 (972)323-2200 Fax (972)323-2396 22 |
Price & Availability of OP910W
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |