 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Preliminary Product Specification OR3005230W Si Optical Receiver, 5 - 300MHz, 190mA max. @ 24VDC FEATURES * * * * * * * Excellent linearity Superior return loss performance Extremely low distortion Optimal reliability Excellent price/performance ratio Low noise Excellent flatness OR3005230W APPLICATION * 5 to 300 MHz CATV reverse amplifier systems Si Optical Receiver 5 - 300MHz 190mA max. @ 24VDC DESCRIPTION * Hybrid high dynamic range optical receiver amplifier module. The module contains a single mode optical input suitable for wavelengths from 1290 to 1600 nm, a terminal to monitor the PIN diode current and an electrical output with an impedance of 75 . HANDLING * Fiberglass optical coupling: maximum tensile strength = 5 N; minimum bending radius = 35mm. LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134) SYMBOL f Pin ESD Tstg Tmb PARAMETER frequency range optical input power (continuous) ESD sensivity (human body model; R = 1.5 k, C = 100 pF) storage temperature operating mounting base temperature MIN. 5 500 - 40 - 20 MAX. 300 5 UNIT MHz mW V C C + 85 + 85 CHARACTERISTICS Table 1: Bandwidth 5 to 300MHz; VB = 24V; Tmb = 30C; ZL = 75 SYMBOL S SL FL S22 EINC s Itot PARAMETER responsivity slope straight line flatness straight line optical input return loss output return loss equivalent input noise spectral sensitivity optical wavelength total current 5) consumption (DC) CONDITIONS = 1310 nm f = 5 to 300 MHz f = 5 to 300 MHz f = 5 to 300 MHz f = 10 to 300 MHz = 1310 +- 20 nm = 1550 +- 20 nm MIN. 850.0 0.0 45.0 16.0 0.8 0.90 1290 160 TYP. MAX. 1.0 0.6 7.5 1600 190 0.4 UNIT V/W dB dB dB dB pA/Hz A/W A/W nm mA Page 1 of 4 2005 July 12 Document Revision Level B Preliminary Product Specification OR3005230W Si Optical Receiver, 5 - 300MHz, 190mA max. @ 24VDC CHARACTERISTICS Table 2: Distortion data, VB = 24V; Tmb = 30C; ZL = 75 SYMBOL d2 PARAMETER second order distortion 1) third order distortion 2) CONDITIONS fm = 54.25 MHz 3) fm = 100.25 MHz 4) MIN. - TYP. MAX. -70.0 -80.0 UNIT dBc dBc d3 Notes: 1. 2. 3. 4. 5. Two laser test; each laser with 25% modulation index; Popt = 1 mW (total). Three laser test; each laser with 40% modulation index; Popt = 1 mW (total). fm = 54.25 MHz; f1 = 20.25 MHz; f2 = 34 MHz, 0.5mW optical power each fm = 100.25 MHz; f1 = 125.25 MHz; f2 = 109.25 MHz, f3 = 134.25MHz, 0.33mW optical power each Itot is total current into hybrid with pin 4 connected to VB=24V CABLE LENGTHS AND CONNECTOR TYPES Table 3: Dimension A, TAB -012 -013 see Figure 1 inches mm 13 848 +104 - Optical Connector Type FC/APC SC/APC 33.4 +0.5 - 4. 33.4 +0.5 -4 848 +13 -104 A connector and boot 0.9 mm buffered fiber Figure 1: Detail of cable attachment Page 2 of 4 2005 July 12 Document Revision Level B Preliminary Product Specification OR3005230W Si Optical Receiver, 5 - 300MHz, 190mA max. @ 24VDC I V U W R M J O S T P K E C Q oG D H N B All Dimensions in mm: nominal A B C D E F G H I J K L M N O P Q R S T U V W 44,6 0,2 14,9 0,2 21,9 0,5 8 0,15 L min 44,4 14,7 21,4 7,85 12,45 38,0 3,95 3,8 25,2 4,0 28,5 11,1 5,4 0,23 0,42 2,24 2,04 2,29 4,83 4,83 4,8 max 44,8 15,1 22,4 8,15 12,75 38,2 4,2 4,2 25,6 4,4 28,9 12,1 6,2 0,27 0,48 2,84 3,04 2,79 5,33 5,33 5,2 F A Pinning: 12,6 0,15 38,1 0,1 4 +0,2 / -0.05 1 2 3 4 5 6 7 8 9 PHOTODIODE CURRENT MONITOR GND GND PHOTODIODE BIAS +VB GND GND OUTPUT 4 0,2 25,4 0,2 UNC 6-32 4,2 0,2 28,7 0,2 11,6 0,5 5,8 0,4 0,25 0,02 0,45 0,03 2,54 0,3 2,54 0,5 2,54 0,25 5,08 0,25 Notes: European Projection 0 5 10mm scale 5,08 0,25 5,0 0,2 5,35 Figure 2: Mechanical dimensions Page 3 of 4 2005 July 12 Document Revision Level B Preliminary Product Specification OR3005230W Si Optical Receiver, 5 - 300MHz, 190mA max. @ 24VDC DEFINITIONS Data Sheet Status Objective Product Specification Preliminary Product Specification Product Specification Limiting values Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. Premier Devices reserves the right to make changes without further notice to any products herein. Premier Devices makes no warranty representation or guarantee regarding the suitability of its products for any particular purpose, nor does Premier Devices assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Premier Devices datasheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customers technical experts. Premier Devices does not convey any license under its patent rights nor the rights of others. Premier Devices products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Premier Devices product could create a situation where personal injury or death may occur. Should Buyer purchase or use Premier Devices products for any such unintended or unauthorized application, Buyer shall indemnify and hold Premier Devices and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, and claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Premier Devices was negligent regarding the design or manufacture of the part. This data sheet contains target or goal specifications for product development. This data sheet contains preliminary data; supplementary data may be published later. This data sheet contains final product specifications. (c) Premier Devices Germany GmbH 2005 How to contact us: Premier Devices Germany GmbH Loeffelholzstrasse 20, D-90441 Nuernberg, Germany Phone: +49 (0) 911 9411 233, FAX: +49 (0) 911 9411 198, Email: sales.germany@premierdevices.com, Internet: http://www.premierdevices.de/ Page 4 of 4 2005 July 12 Document Revision Level B |
Price & Availability of OR3005230W
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |