![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
PLL602-20 200MHz XO IC With Selectable 4X/8X Multiplier FEATURES * * * * * * * * * Integrated crystal oscillator circuitry (XO). Very low Jitter and Phase Noise (-110dBc @ 10kHz offset) Selectable frequency multiplication (x4, x8). Accepts Fundamental Crystal input of 10MHz-30MHz Output Frequency: up to 200MHz CMOS Output enable (OE) pin with 60K pull up resistor Operating temperature range from 0C to 70C 2.5 or 3.3V supply voltage. Available in Green/RoHS compliant 8-pin SOIC package PIN CONFIGURATION XIN/FIN GND SEL X/8X 4 CLK 1 8 XOUT OE NC VDD PLL602-20 2 3 4 7 6 5 DESCRIPTION The PLL602-20 is a general purpose low jitter and low phase noise (-110dBc @10kHz offset), high performance CMOS XO IC. This flexible device can be used as a XO with output frequencies ranging from F XIN x 4 to F XIN x 8 with the use of a single selector pin. This makes the PLL602-20 the ideal high performance, low-cost solution for a wide range of applications requiring up to 200MHz (including 77.76MHz, 125MHz and 155.52MHz). PAD LAYOUT AND DIE ID XIN GND GND SEL4X/8X 1 2 3 7 4 5 6 VDD VDD 9 8 XOUT OE CLK BLOCK DIAGRAM SELx4x/8 XIn XO XOut DIE SPECIFICATION Name Size Selectable Value 31.5x55.1 mil GND 80 micron x 80 micron 10 mil PLL CLK Reverse side Pad Opening Die Thickness C 47745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 www.phaselink.com Rev 02/18/05 Page 1 PLL602-20 200MHz XO IC With Selectable 4X/8X Multiplier PIN/PAD ASSIGNMENT and DESCRIPTION Name XIN/FIN GND Pin # 1 2 Pad # 1 2 3 Die Pads X (m) 101.5 101.5 101.5 Y(m) 1274.0 1075.0 878.4 Type I P Description Crystal or Reference Input Pin. GND connection. Multiplier Selector Pin with 60K pull-up resistor. SEL4X/8X 3 4 101.5 671.8 O Logic State 0 1(default) Clock Output. VDD connection. Do Not Connect. Multiplier x4 x8 CLK VDD DNC OE XOUT 4 5 6 7 8 5 6 7 8 9 101.5 697 697 697 697 425.0 483.0 790.0 1024.0 1274.0 O P O O Output Enable: `0' to disable (tri-state output), 1' (default value when not connected) to enable the output (internal (60K pull up resistor). Crystal output. 47745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 www.phaselink.com Rev 02/18/05 Page 2 PLL602-20 200MHz XO IC With Selectable 4X/8X Multiplier ELECTRICAL SPECIFICATIONS ABSOLUTE MAXIMUM RATINGS PARAMETERS Supply Voltage Range Input Voltage Range Output Voltage Range Soldering Temperature (Green package) Storage Temperature Ambient Operating Temperature TS -65 0 SYMBOL VDD VI VO MIN. MAX. 4.6 VDD+0.5 VDD+0.5 260 150 70 UNITS V V V C C C -0.5 -0.5 -0.5 Exposure of the device under conditions beyond the limits specified by Maximum Ratings for extended periods may cause permanent damage to the device and affect product reliability. These conditions represent a stress rating only, and functional operations of the device at these or any other conditions above the operational limits noted in this specification is not implied. AC SPECIFICATIONS PARAMETERS Crystal Input Frequency(XIN) CONDITIONS Fundamental Crystal At power-up (after VDD increases over 1.62V) 15pF Load, 10/90%VDD 15pF Load, 90/10%VDD At VDD/2 With capacitive decoupling between VDD and GND. Operating only one output. MIN. 10 TYP. MAX. 30 UNITS MHz Settling Time Output Rise Time Output Fall Time Duty Cycle Period Jitter, peak-to-peak* (measured from 10,000 samples) 10 1.2 1.2 45 50 70 2.0 2.0 55 ms ns ns % ps 47745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 www.phaselink.com Rev 02/18/05 Page 3 PLL602-20 200MHz XO IC With Selectable 4X/8X Multiplier DC SPECIFICATIONS PARAMETERS Supply Current, Dynamic, with Loaded Outputs Operating Voltage Output Low Voltage Output High Voltage Output Current Short-circuit Current SYMBOL IDD VDD VOL VOH IOSD IS CONDITIONS At 80MHz, load=15pF, VDD=3.3V MIN. TYP. MAX. 15 UNITS mA V V V 2.25 IOL = +4mA Std. drive IOH = -4mA Std. drive VOL = 0.4V, VOH = 2.4V 50 VDD - 0.4 3.63 0.4 24 mA mA JITTER AND PHASE NOISE SPECIFICATION PARAMETERS Period Jitter (PkPk - 10,000 samples) Phase Noise relative to carrier Phase Noise relative to carrier Phase Noise relative to carrier Phase Noise relative to carrier Phase Noise relative to carrier CONDITIONS at 155MHz, with capacitive decoupling between VDD and GND. at 80MHz, with capacitive decoupling between VDD and GND. 125MHz @100Hz offset 125MHz @1kHz offset 125MHz @10kHz offset 125MHz @100kHz offset 125MHz @1MHz offset MIN. TYP. 50 ps 55 -100 -118 -112 -98 -107 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz MAX. UNITS 47745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 www.phaselink.com Rev 02/18/05 Page 4 PLL602-20 200MHz XO IC With Selectable 4X/8X Multiplier CRYSTAL SPECIFICATIONS PARAMETERS Fundamental Crystal Resonator Frequency Crystal Loading Rating Maximum Sustainable Drive Level Operating Drive Level Crystal Shunt Capacitance Effective Series Resistance, Fundamental, 10-30MHz Note: A detailed crystal specification document is also available for this part SYMBOL FXIN CL (xtal) MIN. 10 TYP. MAX. 30 UNITS MHz pF 11 500 100 W W C0 RE 6 30 pF PACKAGE DRAWINGS (GREEN PACKAGE COMPLIANT) SOIC 8L Symbol A A1 A2 B C D E H L e Dimension in MM Min. Max. 1.35 1.75 0.10 0.25 1.25 1.50 0.33 0.53 0.19 0.27 4.80 5.00 3.80 4.00 5.80 6.20 0.40 0.89 1.27 BSC E H D A2 A A1 e b C L 47745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 www.phaselink.com Rev 02/18/05 Page 5 PLL602-20 200MHz XO IC With Selectable 4X/8X Multiplier ORDERING INFORMATION For part ordering, please contact our Sales Department: 47745 Fremont Blvd., Fremont, CA 94538, USA Tel: (510) 492-0990 Fax: (510) 492-0991 PART NUMBER The order number for this device is a combination of the following: Device number, Package type and Operating temperature range PLL602-20 X X-R PART NUMBER NONE= TUBE R=TAPE and REEL TEMPERATURE C=COMMERCIAL I = INDUSTRIAL PACKAGE TYPE* S=SOIC * PhaseLink Offers Green/RoHS Compliant Packaging Only. Part / Order Number PLL602-20SC PLL602-20SC-R Marking P602-20SC P602-20SC Package Option 8-Pin SOIC (Tube) 8-Pin SOIC (Tape & Reel) PhaseLink Corporation, reserves the right to make changes in its products or specifications, or both at any time without notice. The information furnished by Phaselink is believed to be accurate and reliable. However, PhaseLink makes no guarantee or warranty concerning the accuracy of said information and shall not be responsible for any loss or damage of whatever nature resulting from the use of, or reliance upon this product. LIFE SUPPORT POLICY: PhaseLink's products are not authorized for use as critical components in life support devices or systems without the express written approval of the President of PhaseLink Corporation. 47745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 www.phaselink.com Rev 02/18/05 Page 6 |
Price & Availability of P602-20SC
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |