![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Data Sheet No. PD 10038-F Series PVT312 HEXFET(R) Power MOSFET Photovoltaic Relay Single Pole, Normally Open, 0-250V, 190mA AC/DC Microelectronic Power IC General Description The PVT312 Photovoltaic Relay is a single-pole, normally open solid-state relay that can replace electromechanical relays in many applications. It utilizes International Rectifier's proprietary HEXFET power MOSFET as the output switch, driven by an integrated circuit photovoltaic generator of novel construction. The output switch is controlled by radiation from a GaAlAs light emitting diode (LED) which is optically isolated from the photovoltaic generator. This SSR is specifically designed for telecom applications. PVT312L employs an active current-limiting circuitry enabling it to withstand current surge transients. PVT312 Relays are packaged in a 6-pin, molded DIP package with either thru-hole or surface mount ( "gull-wing") terminals. It is available in standard plastic shipping tubes or on tape-and-reel. Please refer to the Part Identification information opposite. Features " HEXFET Power MOSFET output " Bounce-free operation " 4,000 VRMS I/O isolation " Load current limiting " Linear AC/DC operation " Solid-State Reliability " UL recognized and BABT certified " ESD Tolerance: 4000V Human Body Model 500V Machine Model Applications ! ! ! ! ! On/Off Hook switch Dial-Out relay Ring injection relay Ground start General switching Part Identification PVT312L PVT312LS PVT312LS-T PVT312 PVT312S PVT312S-T current limit, thru-hole current limit, surface-mount current limit,surface-mount, tape and reel no current limit, thru-hole no current limit, surfacemount no current limit, surfacemount, tape and reel (HEXFET is the registered trademark for International Rectifier Power MOSFETs) www.irf.com 1 Series PVT312 Electrical Specifications (-40C TA +85C unless otherwise specified) INPUT CHARACTERISTICS Minimum Control Current (see figures 1 and 2) Maximum Control Current for Off-State Resistance @ TA=+25C Control Current Range (Caution: current limit input LED, see figure 6) Maximum Reverse Voltage Part Numbers PVT312L PVT312 2.0 0.4 2.0 to 25 7.0 PVT312L PVT312 0 to 250 170 190 300 190 210 320 Units mA mA mA V OUTPUT CHARACTERISTICS Operating Voltage Range Maximum Load Current @ TA=+40C, 5mA Control (see figures 1 and 2) A Connection B Connection C Connection Maximum On-State Resistance @T A=+25C for 50mA pulsed load 5mA Control (see figure4) A Connection B Connection C Connection Maximum Off-State Leakage @T A=+25C, 250V (see figure 5) Current Limit @TA=+25C, 5mA Control Connection: Minimum Maximum Maximum Turn-On Time @T A=+25C (see figure 7) for 50mA, 100 V DC load, 5mA Control Maximum Turn-Off Time @TA=+25C (See Fig. 6) For 50mA, 100 VDC load, 5mA Control Maximum Output Capacitance @ 50VDC V(DC or AC peak) mA (AC or DC) mA (DC) mA (DC) 15 8 4.25 1.0 A 190 300 C 330 560 3.0 0.5 50 10 5.5 3 A n/a n/a mA mA ms ms pF GENERAL CHARACTERISTICS Minimum Dielectric Strength, Input-Output Minimum Insulation Resistance, Input-Output @TA=+25C, 50%RH, 100VDC Maximum Capacitance, Input-Output Maximum Pin Soldering Temperature (10 seconds maximum) Ambient Temperature Range: Operating Storage ALL MODELS 4000 1012 1.0 +260 -40 to +85 -40 to +100 VRMS pF C C International Rectifier does not recommend the use of this product in aerospace, avionics, military or life support applications. Users of this International Rectifier product in such applications assume all risks of such use and indemnify International Rectifier against all damages resulting from such use. 2 www.irf.com Series PVT312 Connection Diagrams 250 200 "A" Connection PVT312 175 150 I LED =5 mA I LED= 5 mA 125 100 2 mA 75 50 "A" Connection PVT312L 200 150 2 mA 100 50 25 0 0 20 40 60 80 100 0 0 20 40 60 80 100 Ambient Temperature (deg. C) Ambient Temperature (deg. C) Figure 1. Typical Current Derating Curves Figure 2. Typical Current Derating Curves 250 PVT312 "A" Connection 200 PVT312L 150 2.5 5 mA Control I D = 10 mA 2.0 "A" Connection 100 50 -3.0 -2.5 -2.0 -1.5 -1.0 -0.5 0.5 1.0 1.5 2.0 2.5 3.0 1.5 -50 -100 5 mA Control @25C, pulsed 1.0 -150 0.5 -200 -250 0 -50 -25 0 25 50 75 100 125 Voltage Drop (Vdd) Ambient Temperature (deg. C) Figure 3. Linearity Characteristics Figure 4. Typical Normalized On-Resistance www.irf.com 3 Series PVT312 100 20 30 16 10 12 3.0 8 1.0 4 0.3 CAUTION: provide current limiting so that 25 mA maximum steadystate control current rating is not exceeded 0.1 -35 0 -15 5 25 45 65 85 105 0 0.5 1.0 1.5 2.0 Ambient Temperature (deg. C) LED Forward Voltage Drop (Volts D Figure 5. Typical Normalized Off-State Leakage 20 Figure 6. Input Characteristics (Current Controlled) 10 ILED 90% 5 ID 10% toff 3 0.05 0.1 0.2 0.5 t dly 1.0 ton 2.0 5.0 tdly t off ton Delay Time (microseconds) Figure 7. Typical Delay Times 160 "A" Connection 120 Figure 8. Delay Time Definitions 80 40 0 0 10 20 30 40 50 Vdd, Drain to Drain Voltage (V) Figure 9. Typical Output Capacitance 4 www.irf.com Series PVT312 Case Outlines 01-2008 01 01-2009 01 IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105 Data and specifications subject to change without notice. 10/17/2003 www.irf.com 5 |
Price & Availability of PVT312S-T
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |