 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TOTAL POWER INT'L 750W Single Output Power Supply Features : Universal AC input/Full range AC input active surge current limiting Built-in active PFC function,PF>0.95 Protections:Short circuit, overload, over voltage, over temperature Forced air cooling by built-in DC ball bearing fan High power density 5.48/inch 3 SP-750 series Built-in constant current limiting circuit With power good and fail signal output Built-in remote ON-OFF control Built-in remote sense function 3 years warranty SPECIFICATION MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT SP-750-5 5V 120A 0 ~ 120A 600W SP-750-12 12V 62.5A 0 ~ 62.5A 750W 120mVp-p SP-750-15 15V 50A 0 ~ 50A 750W 120mVp-p 13.5 ~ 16.5V SP-750-24 24V 31.3A 0 ~ 31.3A 751.2W 120mVp-p 22 ~ 26.4V SP-750-27 27V 27.8A 0 ~ 27.8A 750.6W 120mVp-p 24 ~ 30V SP-750-48 48V 15.7A 0 ~ 15.7A 753.6W 120mVp-p 43 ~ 56V 1.0% 0.2% 0.5% RIPPLE & NOISE (max.) Note.2 120mVp-p VOLTAGE ADJ. RANGE 4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 2.0% LINE REGULATION LOAD REGULATION SETUP, RISE, HOLD TIME VOLTAGE RANGE FREQUENCY RANGE INPUT POWER FACTOR EFFICIENCY (Typ.) AC CURRENT 10 ~ 13.5V 1.0% 0.5% 0.3% 2.0% 0.5% 1000ms, 50ms, 16ms/230VAC 1.0% 1.0% 0.3% 0.2% 0.5% 0.5% 1000ms, 50ms, 16ms/115VAC at full load 1.0% 0.2% 0.5% 90 ~ 264VAC 47 ~ 63Hz 0.95/230VAC 81% 127 ~ 370VDC 0.96/115VAC at full load 86% 87% 89% 89% 90% INRUSH CURRENT (max.) LEAKAGE CURRENT OVER LOAD PROTECTION OVER VOLTAGE 11A/115VAC 30A/115VAC <2.0mA / 240VAC 5.3A/230VAC 50A/230VAC 105~125% rated output power Protection type : Constant current limiting, unit will Hiccup after 3 sec. 5.75 ~ 6.3V 13.8 ~ 16.2V 18 ~ 21V 27.6 ~ 32.4V 31 ~ 36.5V 57.6 ~ 67.2V Protection type : Shut down o/p voltage, re-power on to recover 85 5 (TSW1 ) Detect on heatsink of power transistor 85 5 (TSW2 ) Detect on heatsink of power diode Protection type : Shut down o/p voltage, recovers automatically after temperature goes down 50ms/1ms RC+/RC- short power on, open power off OVER TEMPERATURE FUNCTION POWER GOOD/FAIL REMOTE CONTROL WORKING TEMP. -20 ~ +60 (Refer to output load derating curve) 20~90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85 , 10 ~ 95% RH TEMP. COEFFICIENT 0.05%/ (0 ~ 50 ) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1 Approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC SAFETY & ISOLATION RESISTANCE EMI CONDUCTION & RADIATION Compliance to EN55011 (CISPR11), EN55022 (CISPR22) Class B EMC (Note 4) HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY MTBF Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN55024, EN61000-6-2, EN61204-3 Heavy industry level, criteria A OTHERS NOTE DIMENSION PACKING 769.3K hrs min. MIL-HDBK-217F (25 278*127*63.5mm (L*W*H) 2.9Kg; 6pcs / 18.4Kg / 0.98CUFT ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. Total Power Int'l 418 Bridge Street Lowell, MA 01850 PH: 978-453-7272 FX: 978-453-7395 Web: www.total-power.com Sales: sales@total-power.com TOTAL POWER INT'L 750W Single Output Power Supply Mechanical Specification 220 SP-750 Case No.919A series Unit:mm 16 113 20 7 30 63.5 4-M3 5 4-M3 L=6 4-M3 Air flow direction 127 O/P 1 113 7 240 251 278 5 CONTROL 24.75 220 TOP VIEW 16 20 4-M3 30 40.5 1 2 3 7 10 51 62 73 84 240 2 39 I/P BOTTOM VIEW AC Input Terminal Pin. No. Assignment Pin No. 1 2 3 Assignment AC/L AC/N FG DC Output Terminal Pin. No Assignment Pin No. 1 2 Assignment DC OUTPUT +V DC OUTPUT -V Control Pin. No Assignment : MOLEX 5559-NP uses 5558male crimp terminal Pin No. 1 2 3 4 Assignment NC -S G RCTerminal Pin No. Assignment Mating connector 5 NC MOLEX 5556 PF(Power fail signal) 6 MOLEX 5557-NR Female crimp Terminal +S 7 receptacle RC+ 8 Derating Curve Static Characteristics 100 OTHERS 100 90 80 85 60 5V 70 LOAD (%) LOAD (%) 0 10 20 30 40 45 50 60 70 40 60 50 40 20 -20 90 95 100 115 260 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (VAC) 60Hz Total Power Int'l 418 Bridge Street Lowell, MA 01850 PH: 978-453-7272 FX: 978-453-7395 Web: www.total-power.com Sales: sales@total-power.com |
Price & Availability of SP-750-5
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |